Counting maximal independent sets in directed path graphs

The problem of counting maximal independent sets is #P-complete for chordal graphs but solvable in polynomial time for its subclass of interval graphs. This work improves upon both of these results by showing that the problem remains #P-complete when restricted to directed path graphs but that a further restriction to rooted directed path graphs admits a polynomial time solution.     

悬浮法合成固体粒状丙烯酸树脂

研究了悬浮法合成固体丙烯酸树脂颗粒。讨论了不同软硬单体配比对丙烯酸树脂颗粒的玻璃化转变温度、相对分子质量及其分布的影响以及不同的引发剂及悬浮剂对其聚合过程、最终产物形态及上述性能的影响。制得的丙烯酸树脂的数均相对分子质量用凝胶渗透色谱(GPC)测定为3.9×104～6.2×104,相对分子质量分布为2.04～2.32;用红外光谱图表征了制得的丙烯酸树脂结构。差示扫描量热法(DSC)测定了聚合物的玻璃化转变温度(Tg)。     

用油溶性催化剂加氢裂化孤岛减压渣油的研究

介绍了抚顺石油化工研究院开发的油溶性金属催化剂。并以孤岛减压渣油为原料，采用该催化剂在高压釜上进行悬浮床加氢裂化反应试验，馏分油（<538 ℃）收率可达到70％以上。试验结果表明，油溶性金属催化剂具有较高的加氢活性和抑焦性能。     

MACROPROCESS OF PARTICLE FORMATION IN SUSPENSION POLYMERIZATION OF STYRENE WITH INORGANIC STABILIZER SYSTEM

The macroprocess of particle formation from suspension droplets of styrene in a pdymerizationsystem was investigated.Inorganic hydroxyapatite or its mixture with polyvinyl alcohol as thepolymerization system was used.Those items such as the effects of the Weight fraction of dispersed-phase,the amount of the inorganic stabilizer and the agitation speed on the breakup and coalescence of thetransient dispersed drops etc.Were examined.Results showd that the dynamic behavior of the transi-ent polymer droplets changed in the presence of the suspension stabilizer during the reaction.     

水基性农药制剂的开发和前景

论述了水基性农药制剂的内容和类型,详细地讨论了悬浮剂、水乳剂和微乳剂水基性制剂的开发、优劣和前景。指出微乳剂在国际上不是剂型开发的趋势,国内开发微乳剂应审慎对待;而开发悬浮剂和水乳剂的水基性制剂是更有利和有前景的。     

LDA Measurements on a Turbulent Gas/Liquid/Fibre Suspension

Detailed continuous phase flow measurements (mean and RMS velocities) by Laser Doppler Anemometry (LDA) of a turbulent gas/fibre/liquid suspension in a rotary shear tester have been performed with simultaneous torque measurements. The model system comprises a refractive‐index matched suspension in the 4‐12% wt. range with gas contents up to 15% vol. The two transition points, found by Andersson and Rasmuson (2000), were detected also with gas present and appear at higher impeller speeds with increasing gas and fibre concentrations. Plotting RMS and mean velocities versus impeller speed and power input, it is found that both decrease with increasing gas and fibre contents.     

BaFe12O19/聚氨酯磁性复合微球的制备和表征

通过BaFe12O19硅烷偶联剂改性,聚乙二醇1000、甲苯二异氰酸酯在二甲苯溶液中预聚合,预聚物溶液在分散剂聚乙烯吡咯烷酮K30的水溶液中悬浮聚合,三步合成了BaFe12O19/聚氨酯复合微球.用扫描电镜、红外光谱仪、热重-差示扫描同步热分析仪和振动样品磁强计对微球的形貌、结构、玻璃化温度(Tg)和磁性能进行了表征.结果表明:合成的微球以BaFe12O19颗粒为核聚氨酯为壳.表面分布有微孔,微球粒径在400μm左右,粒径大小可通过控制反应条件调节.微球中磁性物质BaFe12O19的含量为11.11%(质量分数),Tg在290 ℃左右,耐热性能好,微球的饱和磁化强度为3.36×103 A/m,矫顽力为3.06×104 A/m.该复合微球是一种有潜在应用价值的新型血管内栓塞材料.     

Preparation and protein adsorption of hydrogel polysucrose microspheres

A series of novel hydrogel polysucrose microspheres with the mean size ranging from 200 to 500 μm were prepared via two‐step method. First, soluble polysucrose was synthesized by solution polymerization between sucrose and epichlorohydrin; second, a reversed phase suspension crosslinking reaction was performed to prepare polysucrose microspheres. The SEM images indicated that these spherical beads had smooth surface and hydrogel interior structure. FTIR was used to characterize the chemical structure of the beads. The hydrated and dry densities, equilibrium water content, and hydroxyl content of polysucrose microspheres were also investigated. The characteristic of high hydroxyl content (15.48–19.04 mmol/g) make these microspheres suitable for protein adsorption. Meanwhile, bovine serum albumin was used to examine the adsorption capacity of the microspheres. These microspheres had a capacity as high as 49.28 mg/g. The adsorption kinetics and recycling of the beads were also investigated. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5934–5940, 2006     

聚乳酸-聚氨酯微球的合成及其形态的研究

以低相对分子质量生物可降解D，L-聚乳酸(D，L-PLA)二醇和六亚甲基二异氰酸酯(HDI)为原料、1，4-丁二醇(BD)为扩链剂及聚乙烯基吡咯烷酮(PVP)为悬浮剂，通过悬浮聚合法初步合成了一种新型聚氨酯微球(PUMS)。用扫描电子显微镜(SEM)考察了BD的含量对微球表面形态的影响，通过激光粒度分析仪讨论了搅拌速率和PVP浓度对微球粒径及其分布的影响，用傅立叶变换红外光谱(FTIR)粒度分析仪对微球的化学结构进行了表征。结果表明，合成的微球的平均粒径随搅拌速率和PVP浓度的增加而减少，粒径分布变宽；当搅拌速率为400r／min，PVP质量分数为1．5％时。微球的平均粒径约47μm，粒径分布最窄。约在10～90μm；微球表面有孔，但随着BD含量的增加，微球表面变得相对粗糙，孔数减少，孔径减小，直至孔消失。