一种新型微带光子带隙结构的优化设计

本文对一种渐变尺寸的新型光子带隙结构进行了优化设计。根据优化后得出的最优结构参数 ,设计出PBG结构。实验结果证明 ,这种优化后的新型结构可以在保持阻带抑制幅度的同时减小通带内的波纹     

A hybrid extended finite element/level set method for modeling phase transformations

A hybrid numerical method for modelling the evolution of sharp phase interfaces on fixed grids is presented. We focus attention on two‐dimensional solidification problems, where the temperature field evolves according to classical heat conduction in two subdomains separated by a moving freezing front. The enrichment strategies of the eXtended Finite Element Method (X‐FEM) are employed to represent the jump in the temperature gradient that governs the velocity of the phase boundary. A new approach with the X‐FEM is suggested for this class of problems whereby the partition of unity is constructed with C¹(Ω) polynomials and enriched with a C⁰(Ω) function. This approach leads to jumps in temperature gradient occurring only at the phase boundary, and is shown to significantly improve estimates for the front velocity. Temporal derivatives of the temperature field in the vicinity of the phase front are obtained with a projection that employs discontinuous enrichment. In conjunction with a finer finite difference grid, the Level Set method is used to represent the evolution of the phase interface. An iterative procedure is adopted to satisfy the constraints on the temperature field on the phase boundary. The robustness and utility of the method is demonstrated with several benchmark problems of phase transformation. Copyright © 2002 John Wiley & Sons, Ltd.     

三峡水电站坝后钢衬钢筋混凝土压力背管的非线性有限元分析

采用钢筋混凝土非线性有限元方法，对三峡水电站钢衬钢筋混凝压力管道结构进行了计算，求得了各种钢材配置下的荷载效应并进行了相应的分析。     

Sensitivity of generation reserve requirements in deregulated power systems

Since demand for power exhibits great variability the amount of firm energy to be purchased to meet real time demand based on forecasts is usually different from the realized demand for that period. The role of generation reserves is to meet the real time fluctuations of power demand. The predictable part of the demand is met through purchases of firm energy. In this paper a model is presented to determine optimal quantities of firm energy and generation reserves to meet random demands. The model is then parameterized introducing a set of factors to perform a sensitivity study. A full factorial experiment is designed to study the impact of five factors on the response variable (i.e., proportion of generation reserves on the total purchased quantity). An example consisting of 640 simulations corresponding to 2⁵ treatment combinations evaluated over 20 randomly generated mean demands is used to identify significant factors on the response variable. Results from the experiment suggest that generation reserve requirements should be adjusted considering changes in significant factors and in the mean demand over the dispatch interval.     

三维有限元法分析频率对接地电阻的影响

提出了用涡流场的A-V有限元分析方法计算接地系统接地电阻的方法,分析了入地电流频率的变化对接地电阻的影响。计算结果表明,频率对接地体自身电阻的影响较大,但对散流电阻的影响很小。     

Influence of Ni Interlayers on the Mechanical Properties of Ti6Al4V/(WC-Co) Friction Welds

Ni interlayers were introduced prior to dissimilar friction welding of Ti6Al4V base material to three cemented carbide substrates. The fracture strength of Ti6Al4V/(WC-6 wt% Co) welds were poor and were markedly improved when 20-µm thick Ni interlayers were introduced prior to dissimilar friction welding. These results were only produced when the (WC-6 wt% Co) cermet was electroplated prior to friction welding. When the Ti6Al4V alloy was electroplated prior to friction welding, fractured WC particles and cracking were observed in the (WC-Co) carbide substrate. The fracture strengths of Ti6Al4V/(WC-11 wt% Co) and Ti6Al4V/(WC-24 wt% Co) welds were not improved when 20-µm thick Ni interlayers were introduced prior to friction welding. During mechanical testing, the Ni layer retained at the dissimilar joint interface created a region of weakness.     

用FEM/FIM研究单壁碳纳米管束

利用范氏力将单壁碳纳米管样品组装到钨针尖上 ,用FEM/FIM对同一碳纳米管样品用热处理方法和场脱附方法进行了研究。场离子显微镜是具有原子级分辨能力的尖端表面分析工具 ,由场离子像推测这次组装的样品是由三根单壁碳纳米管突起组成的碳纳米管束。清洁碳纳米管束样品的场发射像和场离子像有极好的对应关系。场脱附后的碳纳米管束的场发射特性较好地符合Fowler Nordheim场发射模型。通过比较碳纳米管束吸附态和热处理后以及场脱附后的Fowler Nordheim曲线的斜率变化 ,得出碳纳米管束样品逸出功的变化 ,再结合场发射像的变化推断出场脱附与热处理结合是一种较理想的获得清洁碳纳米管表面的方法     

Economic Model to Optimize Underground Utility Protection

The need for better protecting our vital infrastructure from being damaged or destroyed has received increased attention since the terrorist attacks on September 11, 2001. The tragedy of having thousands of innocent people die before the eyes of an entire nation awakened people to the reality of “managed” attacks of unthinkable magnitudes. However, tragedies of a smaller scale are a daily occurrence but accepted as “collateral damage” of work in an unsafe environment. This paper presents a cost-benefit analysis to address the question of how much money should be spent in protecting underground utilities from damage. During the study of an actual incident it was found that the total costs of such accidents are vastly underreported because only costs for emergency responses and repair are tallied up. This paper makes the case that a comprehensive approach for assessing the total economic impact of such incidents on the public, business, and government is the critical stepping stone to a mathematical optimization of expenditure for damage prevention. In addition, the reader will quickly realize that the use of the presented optimization model provides theoretical underpinning for the engineering profession in its effort to better protect our critical infrastructure from terrorist attacks.     

硬地层定向井中几种侧钻方法的灵活应用

在川渝地区，钻定向井、水平井必然要面对地层岩性变化大、硬度高等复杂地质情况，常常会遇到因井下复杂、事故、修改地质目标等原因需要填井侧钻。侧钻的方法不同，侧钻的成功率和效率差异很大。文中分析了川渝地区近几年硬地层定向井、水平井侧钻效率不高、有时甚至失败的原因，归纳总结了近几年常用的几种侧钻方法的施工效果，提出要根据具体条件灵活应用这几种侧钻方法。