我国塑料机械工业概况与发展

介绍了我国2001年塑料机械工业的生产状况，通过大量翔实的数据对我国注射机、挤出机和吹塑机三大产品的生产技术、经济技术指标及进出口市场状况进行了分析。     

水力脉冲式钻井工具的研制与应用

水力脉冲式钻井是利用特定的工具使钻井管柱中的连续流转变为脉冲射流,从而改变井底流场的压力状况,进而提高机械钻速的一种钻井新工艺。在分析水力脉冲产生机理的基础上,探讨了基于瞬变流理论的机械阻断式水力脉冲破岩机理,介绍了SLPMC机械阻断式水力脉冲工具的工作原理及结构特点,简单叙述了该工具在胜利油田进行的2口井的现场试验情况。该钻井工具对于提高机械钻速和降低钻井成本具有一定的积极意义。     

可编程控制器在捆扎机自动控制中的应用

介绍了一种用可编程控制器（PLC）实现捆扎机自动控制的设计方案，详细地介绍了设计过程，给出了完整的程序流程图和部分控制程序。     

基于切削振动相关性识别刀具磨损状态的模型与实验

本文提出基于切削振动相关性识别刀具磨损状态的研究思想,建立了车削中刀杆双向横振动系统及其单输入双输出系统的数学模型。理论和实验均表明,刀杆双向横振动之加速度响应在固有基频处的相干函数与刀具磨损状态之间有很好的规律性,它反映了两者之间的本质机理,并提供了识别刀具磨损状态的新途径。     

用分解法编制轴类零件图程序

采用分解法编写轴类零件程序，即将具有典型结构的轴分解成若干部分，把每一部分编成通用子程序，连同尺寸标注子程序、表面粗糙度子程序、剖面线子程序、尺寸公差及形位公差子程序等一并存贮在程序库中，需要时一一调用。     

The Lazy Cook Problem, or Scheduling Two Parallel Machines to Optimize Vehicle Utilization

A cook has to prepare n cakes using an oven with two racks. According to the recipe, the i-th cake has to be baked for exactly a _i minutes. Cakes to be cooked are taken from a table and carried to the oven, and once cooked are carried back to the table by means of a trolley that can carry two cakes at a time. What is the minimum number q ^* of round trips required of the cook? This problem has application to the operation scheduling of transportation systems and to material cutting. A different problem arises according to whether the cook accepts or not to stay near the oven for awhile with the trolley. If the trolley cannot be idle at the oven, an optimum schedule with no oven idle-time always exists: consequently, the trolley schedule is trivial, and the problem is transformed into a set packing. For this case, we propose and test a heuristic method which generates all of the promising columns of the set packing, and solves the resulting problem by branch-and-bound. Instead, if the trolley can be idle at the oven for a limited amount of time, a problem arises to find an optimal schedule of the trolley: in this case we show how to use a scaling technique in order to obtain a very good feasible solution by the method above.     

Machine translation of non-literary texts: Some Canadian experiences

A survey was carried out of past and current Canadian experiences with machine-aided translation (MAT) systems of non-literary texts in one government institution and three industrial settings. Each organization requires a great deal of translation and had conducted several experiments in the use of MAT. The survey supports positive conclusions about the prospects for expanded use of computers in translation.The authors express their thanks to all those who helped in the preparation of this paper. We are particularly grateful to the staff of the translation departments of the organizations mentioned in the paper for their kind cooperation and their willingness to answer our questions: Chantal Delorme ofIBM Canada, Lorraine Desmarais and Mr. Plamondon of Bell Canada, Pierre Tellier of the Department of the Secretary of State, Maria Russo and Raymond Lapointe of the Xerox Corporation. Furthermore we thank Prof. Graeme Hirst for helpful discussion.     

SC文法功能体系

文法体系的研究一直是自然语言处理研究的核心问题之一.但是,由于自然语言本身所固有的复杂性和非规范性,多义问题始终未能得到圆满的解决.本文提出了SC文法(A SubCategory grammar for integrating Se-mantic and Case analysis),它是一种基于传统的上下文无关文法、语义文法,以及超前与反馈分析技术和格框架约束分析等技术的上下文相关处理文法.该文法不仅能继承传统的上下文无关文法的表示简洁、处理方便的特点,而且能实现语法和语义一体化分析和处理上下文相关以及复杂多义问题.     

一种高并行度的H.264帧内预测器的VLSI设计

分析了帧内预测的17种模式,对于每个4×4大小块的16个像素点的不同模式的预测公式之间的相同运算,采用数字强度缩减的方法去除计算的冗余,提出了一种高并行度的帧内预测器,可以每个时钟周期处理16个像素点的预测值。基于SMIC0.18μm工艺,用verilog对该设计进行了VLSI实现,综合后的电路的关键路径最大时延为10ns,电路规模不超过1.4万门,数据吞吐率可以达到1600Msamples/s。从实现结果来看,与采用可重构方法的设计相比,该设计在相同的并行度下减小了电路面积,简化了控制逻辑。