The influence of raw material characteristics on the industrial pelletizing process and pellet quality

Industrial pelletizing of sawdust was carried out as a designed experiment in the factors: sawdust moisture content, fractions of fresh pine, stored pine and spruce. The process parameters and response variables were energy consumption, pellet flow rate, pellet bulk density, durability and moisture content. The final data consisted of twelve industrial scale runs. Because of the many response variables, data evaluation was by principal component analysis of a 12 × 9 data matrix. The two principal component model showed a clustering of samples, with a good reproducibility of the center points. It also showed a positive correlation of energy consumption, bulk density and durability all negatively correlated to flow rate and moisture content. The stored pine was more related to high durability and bulk density. The role of the spruce fraction was unclear. The design matrix, augmented with the process parameters was a 12 × 6 matrix. Partial least squares regression showed excellent results for pellet moisture content and bulk density. The model for durability was promising. A 12 × 21 data matrix of fatty- and resin acid concentrations measured by GC–MS showed the differences between fresh and stored pine very clearly. The influence of the spruce fraction was less clear. However, the influence of the fatty- and resin acids on the pelletizing process could not be confirmed, indicating that other differences between fresh and stored pine sawdust have to be investigated. This work shows that it is possible to design the pelletizing process for moderate energy consumption and high pellet quality.     

Investigation of the structure and properties of modified Armenian minerals for polymer-based composites

The results of investigation of the modification of the Armenian minerals with fluorine-containing oligomers show that a modified product appears when the mineral fillers are treated with fluoroalkanes. The product preserves the structure of the fillers with a “grafted” fluoroalkane layer in which chlorine atoms locate mainly over their periphery. The composite materials based on heterochained polymers and the modified fillers possess a stronger wear resistance and a low friction coefficient.     

Assessing the potential of renewable energy sources in Turkey

To meet Turkey’s growing energy demand, the installed electric power capacity of 27.8 GW in 2001 has to be doubled by 2010 and increased fourfold by 2020. The difference between Turkey’s total primary energy supply (TPES) of from its own sources and total final consumption (TFC) is projected grow from 1 quad (1.06–2.06) in 1999 to 5.71 quads (2.79–8.5) in 2020 (1 QUAD=293.071 TWh). Turkey’s limited amount of fossil fuels has a present average ratio of proved reserves of 97.38 quads to production rate of 3.2 quads yr⁻¹ of about 30 years. Turkey’s reliance on fossil fuel-based energy systems to meet the growing demand is most likely to exacerbate the issues of energy insecurity, national environmental degradation, and global climate change in increasing proportions. Economically-feasible renewable energy potential in Turkey is estimated at a total of ca. 1.69 quads yr⁻¹ (495.4 TWh yr⁻¹) with the potential for 0.67 quads yr⁻¹ (196.7 TWh yr⁻¹) of biomass energy, 0.42 quads yr⁻¹ (124 TWh yr⁻¹) of hydropower, 0.35 quads yr⁻¹ (102.3 TWh yr⁻¹) of solar energy, 0.17 quads yr⁻¹ (50 TWh yr⁻¹) of wind energy, and 0.08 quads yr⁻¹ (22.4 TWh yr⁻¹) of geothermal energy. Pursuit and implementation of sustainability-based energy policy could provide about 90 and 35% of Turkey’s total energy supply and consumption projected in 2010, respectively. Utilization of renewable energy technologies for electricity generation would necessitate about 23.2 Mha (29.8%) of Turkey’s land resources.     

低温电解的节能实验研究

本文以中国铝业河南分公司电解厂85kA中间点式下料预焙槽为研究对象，通过6个月的低温电解实验，改善“四低一高”(低电解温度、低分子比、低氧化铝浓度、低效应系数和高极距)技术条件，优化工艺技术条件配置，降低分子比和电解温度，维护炉膛的规整，维护电解槽工作电压的稳定，规范员工作业标准，达到提高电流效率、降低电耗的节能效果。     

氧气合理利用决策支持系统和空分装置操作仿真系统

分析了钢铁企业空分系统能源管理的特点 ,并开发出降低空分能耗的应用软件 :氧气合理利用决策支持系统和空分装置操作仿真系统。前者可为决策者提供全面的辅助决策信息和决策支持以降低氧气放散 ,实现氧气的合理利用 ;后者既可实现空分装置运行操作的仿真 ,也可实现空分装置的仿真实验和仿真操作 ,为实施空分装置的节能优化运行提供技术支持     

VSR调节技术在煤气加压机上的应用及分析

叙述了VSR(The Variable Spin Regulator）调节技术在南钢气体供应公司成功应用的实例。实际运行证明，VSR调节技术具有调节灵敏、抗喘、节能、软启动等方面的技术优势。文中还简明地阐述了VSR调节技术的原理并分析比较了液偶及变频调节。     

氧化铝熟料单筒冷却机节能技术改造

本对影响氧化铝熟料单筒冷却机冷却效率的因素进行了分析，并提出了相应的节能技术改造措施，取得了明显的节能效益。     

机械化竖窑技术和节能特性简介

鞍钢耐火公司新建两座430m^3机械化石灰竖窑，与普通窑炉相比具有热耗低、石灰活性高、燃料适应性强、结构简单的特点。     

����Ȼ��Ϊ��Դ��ѹ��ʽ������ϵͳ

以天然气为能源，用燃气机代替电动机驱动压缩机并充分利用发动机废热、工业余热以及低品位环境热量的采暖、空调装置——燃气压缩式热泵近年来发展迅速。美国燃气设备的总装机容量已达到1．2GW，日本燃气机热泵占全部燃气制冷设备的29％，总装机容量大约1GW，燃气机热泵在英国、法国、德国、瑞士等都得到了较快的发展与应用。中研究了以天然气为驱动能源的压缩式热泵的特点及能量利用率，分析并测试了该系统的运行特性及交工况特性，进行了各种工况及转速下的实验研究。结果表明，该系统具有较好的部分负荷特性、一次能源利用率及交工况特性，为一种绿色高效的供热空调系统。