抗静电聚丙烯电机塑料风叶的研制

研究了导电炭黑添加量、炭黑形状、试样成型方法对电机塑料风叶用聚丙烯(PP)材料抗静电性能的影响,采用接枝、增强、增韧技术制得具有优良力学性能和抗静电性能的PP材料。结果表明,炭黑的质量分数为5%时,材料表面电阻率为108Ω数量级,力学性能优良,达到电机用塑料风叶材料的指标要求,并可应用于其它对抗静电性能要求较高的场合,用于制造某些结构件。     

PVA-based activated carbon fibers with lotus root-like axially porous structure

A novel method was developed for the fabrication of activated carbon fiber (ACF) with wet spinning polyvinyl alcohol (PVA) fibers as the precursors. Through a combination of preoxidation, dehydration, carbonization and activation under a certain tension, PVA-based ACFs (PVA-ACFs) with high yields and good mechanical properties were obtained. The surface and cross-section morphologies, pore structures, surface geometries, surface functional groups and crystal structures of the PVA-ACFs were characterized using field emission scanning electron microscopy, low temperature nitrogen adsorption, Fourier transformed infrared spectrophotometry, X-ray photoelectron spectroscopy and X-ray power diffraction. All the PVA-ACF samples prepared had lotus root-like axially meso- and macroporous structures with the domination of micropores. Fractal geometries of PVA-ACFs deduced from nitrogen adsorption isotherms indicates that capillary force dominated in the interactions between nitrogen and the PVA-ACFs. The surface functional groups of the PVA-ACFs depend on the activating agents. Graphitoidal crystal structures were observed for the PVA-ACFs. The small crystal size and short range ordering between the crystallites ensured a high specific surface area of the PVA-ACFs.     

新型疏水沉淀二氧化硅的制备

以沉淀二氧化硅的半成品为原料,用DMC(二甲基聚环硅氧烷)进行表面改性,得到疏水度为29.9%的疏水二氧化硅产品。实验研究了DMC用量、改性时间、体系酸度、异丙醇的加入量及表面活性剂的添加等因素对改性效果的影响。结果表明,异丙醇和表面活性剂(Tween-20)的加入及酸性介质对提高产品改性效果影响显著;改性后样品的DBP、比表面积以及孔隙度均下降,说明改性后产品结构排布更加紧密,部分微孔被堵塞封闭。该方法具有工艺简单、成本较低、无有害腐蚀气体产生等优点。     

高铁酸钾稳定性研究进展

综述了多功能水处理剂高铁酸钾稳定性影响因素,探讨了提高高铁酸钾稳定性的方法,并展望了高铁酸钾稳定性研究的方向.     

垃圾焚烧厂渗滤液生化出水混凝处理及其模型的建立

对采用聚合氯化铝、硫酸铝和氯化铁等混凝剂处理焚烧厂垃圾渗滤液生化出水的混凝效果及其模型进行了研究.结果表明:聚合氯化铝对焚烧厂垃圾渗滤液中CODCr、色度和浊度的去除效果比硫酸铝和氯化铁要好,且投加量相对也较少.在投加量500 mg/L、中性条件下,CODCr、浊度和色度的去除率可分别达到28.9%、91.6%和77.6%.在不同投药量、pH和搅拌速度下,PAC保持了良好的污染物去除效果,而对硫酸铝和氯化铁的处理效果影响较大.各种混凝剂的最佳投药量与起始CODCr浓度之间的关系可采用指数关系式表达.通过对PAC在各条件下混凝效果的统计分析,采用Matlab优化工具软件,建立了垃圾焚烧厂垃圾渗滤液PAC混凝处理的处理效果数学模式方程,其与试验结果的相关系数可达到0.982,表明建立的模型与混凝处理效果较为一致.     

过磷酸钙含氟尾气处理的新方法

对动态泡沫床处理过磷酸钙含氟尾气的有关技术及费用作了说明 ,指出该方法费用高 ;提出一种新方法 ,该方法不加任何化学助剂 ,采用水作吸收剂 ,只需改变动态泡沫床一些设计参数和选用一种特殊的喷头 (喷头周围设计 1个圆锥形死角区 ,使含氟气体不可能进入该区 )避免了硅胶堵塞。该方法已在湖南浦市化工总厂运行 1年多未发现堵塞 ,同时该法投资少、能耗低、排放尾气达标     

二氧化氯分析的研究进展

二氧化氯作为新一代杀菌消毒剂，在水处理中获得越来越广泛的应用。在应用中，二氧化氯会产生分解及歧化反应，产生副产物如Cl2、ClO^-、ClO2^-、ClO3^-，所以需要对残余ClO2及这些副产物进行分析，本文对二氧化氯现有的分析方法进行了讨论。     

Electrochemical destruction of chlorophenoxy herbicides by anodic oxidation and electro-Fenton using a boron-doped diamond electrode

The degradation of herbicides 4-chlorophenoxyacetic acid (4-CPA), 4-chloro-2-methylphenoxyacetic acid (MCPA), 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4,5-trichlorophenoxyacetic acid (2,4,5-T) in aqueous medium of pH 3.0 has been comparatively studied by anodic oxidation and electro-Fenton using a boron-doped diamond (BDD) anode. All solutions are totally mineralized by electro-Fenton, even at low current, being the process more efficient with 1 mM Fe²⁺ as catalyst. This is due to the production of large amounts of oxidant hydroxyl radical (OH) on the BDD surface by water oxidation and from Fenton’s reaction between added Fe²⁺ and H₂O₂ electrogenerated at the O₂-diffusion cathode. The herbicide solutions are also completely depolluted by anodic oxidation. Although a quicker degradation is found at the first stages of electro-Fenton, similar times are required for achieving overall mineralization in both methods. The decay kinetics of all herbicides always follows a pseudo first-order reaction. Reversed-phase chromatography allows detecting 4-chlorophenol, 4-chloro-o-cresol, 2,4-dichlorophenol and 2,4,5-trichlorophenol as primary aromatic intermediates of 4-CPA, MCPA, 2,4-D and 2,4,5-T, respectively. Dechlorination of these products gives Cl⁻, which is slowly oxidized on BDD. Ion-exclusion chromatography reveals the presence of persistent oxalic acid in electro-Fenton by formation of Fe³⁺-oxalato complexes, which are slowly destroyed by OH adsorbed on BDD. In anodic oxidation, oxalic acid is mineralized practically at the same rate as generated.     

掺铈镧氧化锆触媒材料的研制

以锆、铈、镧的无机盐为原料 ,采用共沉淀法制备了含CeO2 -La2 O3的ZrO2 复合氧化物触媒材料。通过改变铈化合物和镧化合物的添加量及焙烧温度来考察其对比表面积和主晶相的影响。利用XRD、BET、DTA等分析手段对合成的复合氧化物的部分性质和主要晶相进行检测分析 ,结果表明加入氨水作沉淀剂及铈化合物和镧化合物添加量一定时可得到以四方相为主的ZrO2 晶相 ,比表面积较大 ;通过碳—氢转化率的测定 ,碳氢转化率在 60 0℃可达到 80 % ,表明具有一定的触媒性能     

K2CO3生产中NH4Cl废水的回收技术

分析了反渗透的基本原理，详细介绍了采用反渗透膜分离技术回收利用K2CO3生产过程中产生的含NH4Cl废水的工艺过程。处理低浓度含NH4Cl废水100m^3／h和高浓度含NH4Cl废水40m^3／h工业化装置建成投产后，处理前低浓度废水含NH4Cl1000mg／L，高浓度废水含NH4Cl10000mg／L，pH=8～10；处理后，产品淡水含NH4Cl≤10mg／L、pH=7～8，产品浓水含NH4Cl≥60000mg／L、pH=8～lO。该装置的投运，取得了明显的经济效益和社会效益。