太阳能帆板输出功率短期预测研究

在卫星观测中,经常由于各种原因导致短时间内无法提取目标卫星数据,使控制系统无法继续对其保持高精度跟踪和控制。文章主要研究ARIMA模型在卫星遥测数据短期预测中的应用。使用Matlab软件进行ARIMA模型参数计算,再使用SPSS软件执行数据预测,并进行残差分析,通过实例验证,短时期内的预测数据精度较高。     

Nondestructive characterization of the mechanical strength of diffusion bonds. II. Application of a quasi-static spring model

It has been shown that the acoustic response of imperfect interfaces may be described by a quasi-static spring model. In the present paper, experimental data on the geometry of the contacts between two diffusion-bonded blocks have been used to determine the spring stiffness of such interfaces which have been correlated with experimentally determined ultrasonic reflection coefficients. The correlation between the theoretical reflection coefficient and the spring stiffness was found to be in excellent agreement with experimentally-observed values, if the disbonds are of infinitesimally small thickness. For disbonds of finite thickness, the agreement is less satisfactory. Reasons for the discrepancy in the latter case are unknown at the present time.     

太阳风粒子数据映射模型的设计与实现

为了能够快速获得第三级太阳风粒子可分析处理的结构化数据,本文采用将数据映射到内存和采用语言集成查询技术解决数据的完整映射和快速访问。通过设计数据映射模型,将用PDS数据的数据标签和数据产品分别映射到模型的值域和属性域,解决本地或网络数据内存映射的问题。为测试这个实例,采用双倍缓冲和贝塞尔插值技术对数据能谱进行了实时绘制。结果表明该模型具有高效性、完备性和高吻合度。这个基于内存映射的模型能够较好地解决异构数据快速结构化数据访问的数据源动力不足问题,为进一步处理和分析太阳高能粒子的频谱、成份和通量及随时间、空间变化的分布特征等提供了基础。     

Fabrication of Nano-TiO2 Coating for Dye-Sensitized Solar Cell by Vacuum Cold Spraying at Room Temperature

Deposition of nanocrystalline TiO₂ coating at low temperature is becoming more attractive due to the possibility for continuous roll production of the coating for assembly lines of dye-sensitized solar cell (DSC) at a low cost. In this study, porous nano-TiO₂ coating was deposited by vacuum cold spraying (VCS) at room temperature on a conducting glass substrate using commercial P25 nanocrystalline TiO₂ powder. The microstructure of TiO₂ coating was characterized by field emission scanning electron microscopy (FESEM) and nitrogen adsorption test. A commercial dye (N719) was adsorbed on the surface of TiO₂ particles within the coating to assemble a DSC. The cell performance was evaluated by employing simulated solar light at an intensity of 100 mW/cm². The results showed that TiO₂ coating was deposited by the agglomerates of nano-TiO₂ powders. The Brunauer-Emmett-Teller (BET) test of the as-sprayed TiO₂ coating yielded a porosity of 49% and an average pore size of 17 nm. The assembled solar cell yielded a short-circuit current density of 7.3 mA/cm² and an energy conversion efficiency of 2.4%. The test results indicate that VCS was a promising method to deposit nanocrystalline TiO₂ coatings at low temperature applied to DSCs. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.     

水工混凝土构件裂缝检测方法及应用

水利工程在长期运行过程中,其混凝土构件会出现磨蚀、裂缝等损伤,如这类问题不能够及时得到处理,将会严重影响水利工程的安全运行。本次研究主要针对水工混凝土构件中的裂缝检测方法进行研究,提出从“定性”到“定量”的一体化检测思路,具体实施过程分为四部分,即“普探—详查—判定—验证”,其中,普探阶段采用探地雷达法,确定裂缝的总体分布;详查阶段采用超声横波反射三维成像的方法,确定裂缝的纵深向分布;判定阶段分别采用裂缝测宽法和表面声波法,用来确定裂缝的表面宽度和贯穿深度;验证采用钻孔电视,确定探测结果的正确性和准确性。上述技术路线突破了单一方法的限制,可有效地运用于水工混凝土构件裂缝检测,经实践证实,具有良好的检测效果。     

论"美丑对照"与"以丑为美"的文艺美学观

本文运用比较的方法,论述了雨果的“美丑对照原则”与波德莱尔“以丑为美”理论的异同,并以他们各自的创作实践说明了这两种理论的运用都没有改变事物（描写的对象）的本质,只是在一定程度上改变了事物的原有面貌;它们都是对客观事物的具体反映和直接把握,是艺术家对人性善和美的异曲同工的追求,为人们提供了全面的艺术范例和审美观念。     

光热电站容量效益评估及影响因素研究

光热发电作为一种清洁能源,配置储热后具有良好的调节性能,近年得到大力发展。依据自身经济性,光热电站往往配备较大的储热装置,能够平移所吸收的光热能,且具有跨日调节能力,使得光热机组有一定替代常规机组带负荷的能力,即容量效益。本文提出一种基于等可靠性的光热电站容量效益评估方法,考虑了调峰方式、储热时长、新能源规模、光热电站规模对光热电站容量效益发挥的影响,采用基于数学优化的生产模拟仿真程序,以周为尺度,计算全年8760 h的系统运行状态,计及了机组启停、水电跨日调节、抽蓄跨日调节、光热电站的跨日调节等因素。最后通过对西北地区实际电网的仿真,验证了所提方法的有效性。     

STUDY ON Ni-Cr SYSTEM SOLAR SELECTIVE THIN FILMS PREPARED BY MAGNETRON REACTIVE SPUTTERING PROCESS

1. IntroductionSolar selective thiIl solid fil1us are the key part for solar heat collect'ors. But ll1ostfactories still produced solar absorptive filn1s by traditional tecIl11ology sucl1 as pai1ltillga1ld electrocl1eluical process that nlust result in po…     

Effect of oxygen precipitates in solar grade silicon on minority carrier lifetime and efficiency of solar cells

The effect of oxygen precipitates on minority carrier lifetime and performance of solar cell was studied by means of Fourier Transform Infrared Spectroscopy (FTIR), quasi-steady state photoconductance (QSSPCD), optical microscope, spectrumresponse and solar cell efficiency test. The minority carrier lifetime and performance of solar cell reduced depend on oxygen precipitates. A few of oxygen precipitates have formed after single-step annealing; and they do not impact the efficiency dramatically. Pre-annealing at 650 ℃ for 4 h enhances the oxygen precipitation when it is subjected to middle temperature annealing. The solar cells performance decayed sharply. Especially annealing at 950 ℃ for 3 h, the V os and I sc of cells decrease 12% and 25% respectively. Few oxygen precipitates have formed in silicon after high temperature annealing at about 1050 ℃ whether pre-annealing is used or not, and the performance of cells is notbe affected.     

用WKB方法讨论透射系数和反射系数

本文用WKB近似方法讨论了势垒贯穿问题系数T和其透射反射系数R之和恒等为1,即满足恒等式T R=1,并进一步得出这一结论不仅适用于一般势垒贯穿而且在方势垒贯穿中也成立,最后讨论了势垒贯穿的几种极限情况,例如,h→0(即经典情况),势垒高度v→∞、v→0,势垒宽度a→∞、a→0,等几种特殊情况下的T及R的取值问题。