XPS studies of directly fluorinated HDPE: problems and solutions

X-ray photoelectron spectroscopy (XPS) applied to the study of fluorinated polymer surfaces presents several problems related both to peak assignment and to degradation. In this work, we analyse extensively the question of XPS peak assignments in this kind of surfaces. We conclude that in this kind of surfaces using binding energy differences between fluorine and carbon is better than using absolute binding energies. Also a useful relation between fluorine photoelectron energy vs. polymer composition expressed through the atomic ratio fluorine/carbon (F/C) was found. A protocol for data treatment is proposed and applied to a XPS study of the degradation induced by X-ray on high-density polyethylene surfaces modified by direct fluorination. Results obtained for the degradation, namely the atomic ratio F/C obtained by two different methods, combined with angle resolved X-ray photoelectron spectroscopy (ARXPS) were used to study the fluorine concentration profile in depth, producing self-consistent results.     

甲醛与甲酸甲酯的偶联反应 Ⅰ.杂多酸的催化作用

研究了４种杂多酸（磷钨酸、硅钨酸、磷钼酸和硅钼酸）对甲醛和甲酸甲酯偶联反应的催化作用；对反应条件进行了考察。结果表明，磷钨酸和硅钨酸对该反应具有较高的催化活性；而氧化性强的钼系杂多酸的活性较低。水对甲醛和甲酸甲酯的偶联反应具有不利影响。将杂多酸在３００℃进行热处理后，其活性显著增强。     

Encapsulation of PV modules using ethylene vinyl acetate copolymer as a pottant: A critical review

The primary purpose of this work is to review the literature about what is and is not known about using ethylene vinyl acetate (EVA0 copolymer as the encapsulant (or pottant) material in photovoltaic (PV) modules. Secondary purposes include elucidating the complexity of the encapsulation problem, providing an overview about encapsulation of PV cells and modules, providing a historical overview of the relevant research and development on EVA, summarizing performance losses reported for PV systems deployed since ca. 1981, and summarizing the general problems of polymer stability in a solar environment. We also provide a critical review of aspects of reported work for cases that we believe are important.Failure modes resolved in the early work to establish reliability of deployed modules and the purposes and properties of pottants, are summarized. Typical performance losses in large field-deployed, large-scale systems ranging from 1% to 10% per year are given quantitatively, and qualitative reports of EVA discoloration are summarized with respect to ultraviolet (UV), world-wide location and site dependence.The general stability of polymers and their desirable bulk properties for solar utilization are given. The stabilization formulation for EVA, its effectiveness, and changes in it during degradation are discussed. The degradation mechanisms for the base resin, e.g., unstabilized Elvax 150^TM, and stabilized EVA are indicated for literature dating to the early 1950s, and the role played by unsaturated chromophores is indicated. The limited number of studies relating discoloration and PV cell efficiency are summarized.Observed degradation of EVA or the unstabilized base resin in the laboratory and examples used to measure the degradation are summarized in sections entitled: (1) thermally-induced degradation; (2) photodegradation and photothermal degradation of EVA in different temperature regimes; (3) photobleaching and photodegradation of the UV absorber and cross-linking agent; (4) acetic acid and metal and metal-oxide catalyzed oxidative degradation; and (5) discolaration and PV cell efficiency losses.Processing effects/influences on EVA stability are discussed in sections entitled: (1) EVA raw materials and extruded, uncured films; (2) thermal encapsulation processes; (3) effects of lamination, curing, and curing peroxide on gel content and chromophores formed; and (4) incomplete shielding of curing-generated chromophores. A summary is given for the limited number of accelerated lifetime testing efforts and examples of erroneous service lifetime predictions for EVA are discussed. The known factors that effect the discoloration rate of several EVA formulations are discussed in which the reduction in rate by using UV-absorbing superstrates is a prime example. A summary is given of what is and is not known about EVA degradation mechanisms, degradation from exposures in field-deployed modeules and/or laboratory testing, and factors that contribute to EVA stability or degradation. Finally, conclusions about using Elvax 150 in EVA formulations are summarized, and future prospects for developing the next-generation pottant for encapsulating PV modules are discussed.     

A method for the preparation of PMMA-SiO2 nanocomposites with high homogeneity

It is possible to optimize the performance of the inorganic-organic composites dispersing the inorganic component in the organic matrix on a nanomiter length scale. If dry the inorganic phase cannot be intimately dispersed during the incorporation in the matrix. When the particle surface is organically modified, and the incorporation is made starting from a liquid dispersion (particles in polymer solution), the resulting composites exhibit an excellent homogeneity. Here, monolithic [poly(methyl methacrylate)/monodisperse silica particles] nanocomposites have been prepared and characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS), micro-hardness, and differential scanning calorimetry (DSC).     

Moderate antioxidative efficiencies of flavonoids during peroxidation of methyl linoleate in homogeneous and micellar solutions

The relative reactivities as well as the stoichiometric coefficients for a number of flavonoids, catechols, and—for comparison—standard phenolic antioxidants were determined by analyzing the kinetics of oxygen consumption in organic and micellar systems, with peroxidation initiated by lipid- and water-soluble azo initiators. The results demonstrated that the flavonoids did not behave as classic phenolic antioxidants such as α-tocopherol, but showed only moderate chain-breaking activities. The results were in line with other structure-activity relationship studies on the importance of the B-ring catechol structure, the 2,3-double bond, and the 3,5-hydroxy groups. The data are discussed in view of possible explanations of the deviations flavonoids reveal in their behavior compared with regular phenolic antioxidants.     

低浓度CO合成甲酸甲酯中试研究

进行了低浓度CO合成甲酸甲酯的中试研究,探讨了温度、压力、流速、催化剂浓度等因素对反应的影响,在优化条件下考察了系统的稳定性。结果表明,低浓度CO(体积分数15%)合成甲酸甲酯CO的单程转化率达到50%以上,粗品中甲酸甲酯含量达到7%～9%,可以满足工业浓缩要求,且整个合成系统未发生母液堵塞的问题,与高浓度CO羰基合成甲酸甲酯相比,单位生产成本可降低30%,具有良好的技术先进性。     

超声波处理石油污水的实验研究

考察了在不同空化状态下超声波对石油污水化学耗氧量(COD)的降低作用。探讨了时间、功率、pH值及温度对石油污水化学耗氧量降低作用的影响。结果表明，石油污水化学耗氧量的降低率随着时间增大而增大，随着温度、pH值的增加而减小，随着功率的增加，先增加，然后再减小。     

TiO_2纤维的制备、表征及其光催化活性

采用常压乙二醇法制备出在可见光下具有较高催化活性的TiO2纤维。扫描电子显微镜表征结果表明,TiO2纤维直径为0.8～2.0μm、长度为5～25μm;BET比表面积和X射线衍射表征结果表明,随焙烧温度的升高,比表面积减小,TiO2纤维晶型逐渐由锐钛矿型向金红石型转变;紫外-可见漫反射光谱分析结果表明,TiO2纤维在可见光区有明显的吸收。在可见光下对甲基橙和苯酚的降解实验表明,焙烧温度为400℃时TiO2纤维的催化活性最好,对甲基橙和苯酚的降解率分别达到90.3%和84.0%;所制备的TiO2纤维比溶胶-凝胶法制备的锐钛矿型TiO2在可见光下具有更好的催化活性,原因是其能带间隙减小和吸收波长扩展到可见光区所致。     

Photocatalytic properties of screen-printed titania

Nanocrystalline thin films of important surface roughness and complexity were prepared by screen-printing of commercial TiO₂ powder. The screen-printed titania films were tested in the photocatalytic decomposition reaction of methyl orange under UV light (350 nm). The photocatalytic activity strongly depends on the titania paste components and especially on the presence of a surface modifier (acetyl acetone) combined with a rheology controlling agent (ethyl cellulose). This results in improvement of the paste viscosity and optimization of the films morphology. Experiments under direct full sunlight illumination prove the importance of the screen-printed films for practical applications.