热欧地区残留可容纳空间分布及储集砂体预测

辽河盆地热欧地区勘探程度低,取心资料少,砂体与油气分布具有较强的隐蔽性。针对这一问题,首次将层序地层学的原理和方法应用于该区储集砂体分布规律的预测。对地层的重新划分与对比发现,研究区沙三段内部存在着明显的不整合界面SB₂。该不整合面的形成期正是河道砂储集体沿层序SQ₂-TST沉积初期残留可容纳空间的充填期,因此循着层序界面SB₂寻找沉积古地貌低洼区是预测砂岩储集体的关键。对比发现,受断裂与火山岩堆集体的联合控制,古地貌低洼区沿沟谷及火山岩体侧翼的断槽一带展布,钻井证实该带是层序SQ₂-TST河道砂体的主要充填区。对这些砂体的成功预测有效地指导了该地区油气勘探。     

纺丝组件漏浆原因分析

通过对纺丝组件工艺对比调试,分析了纺丝组件消耗材料对纺丝组件漏浆的影响,指出了纺丝组件漏浆的主要影响因素。     

现场总线技术在城市污水处理与气象中的应用

文章主要讨论了LonWorks现场总线技术在城市污水处理厂和气象指数预报中的应用。采用IPC和PLC控制结构对现场的各种设备实现控制和数据的采集，通过现场总线网络传输数据到中心控制室或远程终端，实现污水处理的自动控制和气象信息的实时采集和处理。     

分析矩形光波导损耗的简易方法

利用有效折射率和修正的有效折射率方法对矩形光波导的损耗作了简单有效的分析，并且计算出了纵向传播系数和衰减系数的大小。     

由光率体求导折射率及振动方向的新方法

从光率体出发，利用坐标轴旋转，导出了光在晶体中传播时折射率及振动方向的公式。     

测井新技术在四川油气勘探开发中的应用

综述随着四川盆地油气勘探深入所面临的油气领域复杂和困难的技术问题，介绍应用测井新技术为四川油气开发解决了大量的技术难题，特别是在复杂缝，洞型储层的评价，井旁地质构造形态精细分析和地质，测井，地震多学科结合储层横向预测等3个方面所取得的良好应用效果。     

NO emission characteristics in counterflow diffusion flame of blended fuel of H2/CO2/Ar

Flame structure and NO emission characteristics in counterflow diffusion flame of blended fuel of H₂/CO₂/Ar have been numerically simulated with detailed chemistry. The combination of H₂, CO₂ and Ar as fuel is selected to clearly display the contribution of hydrocarbon products to flame structure and NO emission characteristics due to the breakdown of CO₂. A radiative heat loss term is involved to correctly describe the flame dynamics especially at low strain rates. The detailed chemistry adopts the reaction mechanism of GRI 2.11, which consists of 49 species and 279 elementary reactions. All mechanisms including thermal, NO₂, N₂O and Fenimore are taken into account to separately evaluate the effects of CO₂ addition on NO emission characteristics. The increase of added CO₂ quantity causes flame temperature to fall since at high strain rates a diluent effect is prevailing and at low strain rates the breakdown of CO₂ produces relatively populous hydrocarbon products and thus the existence of hydrocarbon products inhibits chain branching. It is also found that the contribution of NO production by N₂O and NO₂ mechanisms are negligible and that thermal mechanism is concentrated on only the reaction zone. As strain rate and CO₂ quantity increase, NO production is remarkably augmented. Copyright © 2002 John Wiley & Sons, Ltd.     

连续工作型电子装备战备完好性预计

从战略完好性的实际内涵出发，考虑到装备实际工作中可能处于不同的工作状态，因而其战略完好性模型也应有所有同。对于处于连续工作状态的电子装备，即使工作中发生故障，只要执行下次任务前能修好，就不影响装备的战略完好性。基于此，得出了电子装备处于连续工作状态下的战略完好性预计模型，并在对应的条件下对此模型的得出进行了缜密的推理。     

Synthesis and characterisation of copolyesters from poly(ethylene terephthalate) and poly(hexamethylene terephthalate)

Copolyesters containing poly(ethylene terephthalate) and poly(hexamethylene terephthalate) (PHT) were prepared by a melt condensation reaction. The copolymers were characterised by infrared spectroscopy and intrinsic viscosity measurements. The density of the copolyesters decreased with increasing percentage of PHT segments in the backbone. Glass transition temperatures (T_g). melting points (T_m) and crystallisation temperatures (T_c) were determined by differential scanning calorimetry. An increase in the percentage of PHT resulted in decrease in T_g, T_m and T_c. The as-prepared copolyesters were crystalline in nature and no exotherm indicative of cold crystallisation was observed. The relative thermal stability of the polymers was evaluated by dynamic thermogravimetry in a nitrogen atmosphere. An increase in percentage of PHT resulted in a decrease in initial decomposition temperature. The rate of crystallisation of the copolymers was studied by small angle light scattering. An increase in percentage of PHT resulted in an increase in the rate of crystallisation.     

Effects of solidification structure on fatigue crack initiation and fatigue strength in Al−Si−Mg cast alloys

Rotating-bending uniaxial fatigue tests and micro-fatigue crack initiation tests were carried out using a permanent mold cast (PMC) and semi-solid die cast (SDC) with Al−7%Si−0.35%Mg composition in order to examine the relationship between solidification structures and fatigue behaviors. The crack length was measured using a replication method. Fatigue strength was improved in SDC, which was almost consistent with the predicted fatigue strength using the size of Si particle cluster. Resistance to fatigue crack initiation and fatigue strength were improved in SDC owing to the finer Si cluster and to higher ultimate tensile strength. Fatigue crack in PMC was preferentially initiated at pores. For SDC, the fatigue crack was initiated at the Si particle/matrix interface, and then sucessively grew along eutectic cell boundaries.