平纹织物复合材料的弹性模量预测

利用细观力学的代表体积元(RVE)法,预测了平纹织物复合材料的弹性模量。建立了表征RVE形态的数学模型,分析了细观结构与宏观性能之间的关系,编制了从组分材料的弹性性能推测复合材料的弹性性能的预测程序。对理论预测进行了实验验证,理论值与实测值在一定误差范围内能较好吻合,说明此预测方法具有一定的可靠性。     

盆池涡涡动过程数值研究

盆池涡是在盆池排水时在盆池中央的排水管道入口处形成的漏斗状旋涡。文中采用标准κ-ε湍流模型和VOF方法对盆池涡的涡动全过程进行了仿真模拟，然后对计算结果进行分析和归纳，提出了盆池涡涡动机理假说。盆池涡是由外来扰动或流道截面几何形状的不规则或表面粗糙度不均匀引起速度场一定的切向流动而诱发出来的旋涡，其旋转方向是随机的，但与形成的切向流动方向一致。盆池涡是一种类兰金涡，速度和压力的分布具有兰金组合涡的特点；盆池涡在成熟阶段具有三个特性区域，分别称为抽气孔、吸气孔、抬气区域。     

微重力落塔电磁悬吊、释放技术研究

论述了微重力落塔电磁悬吊、释放、提升机构的关键技术,电磁释放过程的特性分析以及微重力落塔实际试验的情况。分析说明:悬吊、释放性能的好坏决定了试验落舱的微重力水平,也是微重力落塔试验能否成功的关键技术。     

CAD8903机芯的视频音频转换电路设计

本文概要介绍了CAD 8903机芯采用国产集成电路CD7680,CD74211,DG4053实现音频、视频切换功能的电路,并对CD7680中音频信号处理电路的特殊用法进行了说明。     

Studies on Catalytic Side-Chain Oxidation of Nitroaromatics to Aldehydes with Oxygen

The side-chain oxidation of 2-nitrotoluene in liquid phase in the presence of catalytic amount of manganese sulfate and stoichiometric amount of potassium hydroxide with oxygen was studied. In the most favorable conditions, over 80% of conversion of 2-nitrotoluene and 50% of selectivity to 2-nitrobenzaldehyde was achieved. Effects of the reaction parameters on the conversion of the reactant and the selectivity of the product were examined. These results, together with EPR spectroscopic study, show that a benzyl anion was formed in the early stage of the reaction, which was then converted to the final product via a free radical mechanism.     

NdBO_3和 Nd(BO_2)_3的标准生成自由能

用 CaF_2单晶和 ZrO_2(+MgO)为固体电解质分别构成原电池:■和 Pt,B_((s)),NdBO_(3(s)),Nd(BO_2)_(3(s))|ZrO_2|Cr_2O_(3(s)),Cr_((s)),Pt联合测了 NdBO_3和 Nd(BO_2)_3的标准生成自由能:ΔG~0_(NdBO_3)=-1757+3.8×10~(-1)TΔG~0_(Nd)(BO_2)_3=-3435+8.8×10~(-1)T由此求出由氧化物生成 NdBO_3及 Nd((BO_2)_3)的反应的标准生成自由能变化:1/2Nd_2O_(3(s))+1/2B_2O_(3■)=NdBO_(3(s))ΔG~0_(NdBO_3)=-242+1.4×10~(-1)T和 1/2Nd_2O_(3(s))+3/2B_2O_(3(s))=Nd(BO_2)_(3■)ΔG~0′_(NdBO_2)3=-693+4.6×10~(-1)T     

电解法烟道气二氧化硫在线监测系统的设计

介绍了一种烟道气中SO2在线检测系统，该系统可以实现24h不间断地监测烟道气中SO2的体积分数和质量浓度，同时将信息经网络传送给环保有关部门，具有一定的新颖性、可靠性、准确性。     

Resilient metal spring network silicone-matrix composite for separable interconnections

Resilient metal spring silicone-matrix conducting composites for separable interconnections in electronics were fabricated by the impregnation of silicone into a preform comprising randomly oriented C-shaped Cu-Be springs and a small proportion of Sn-Pb solder, which served to connect the springs at some of their intersections. Composites containing 6.1-9.8 vol.% total filler exhibited volume electrical resistivity 0.5-1.0 mΩ.cm and contact resistivity (with copper) 11-17 mΩ.cm². A compressive stress of about 30 kPa was needed for the low contact resistivity to be reached. The volume 17-26% and the contact resistivity increased by 5% after heating in air at 130-150°C for seven days. Composites containing <9 vol.% total filler showed no stress relaxation for seven days at 6.0% strain.     

结构参量对脉冲高斯光束布拉格衍射特性的影响

利用二维耦合波理论,研究了体光栅对时间和空间都为高斯型分布的脉冲激光光束的衍射性质,得到了衍射和透射光振幅的解析表达式.讨论了体光栅的结构参量对衍射光束的空间和频谱强度分布以及衍射效率的影响.结果表明,体光栅的波长选择带宽和衍射光束带宽随着结构参量的增大而增大,衍射效率随着入射脉冲时间宽度的增大而增大,并趋于定值,结构参量值越小,达到饱和的速度越慢,饱和值越大.