环氧-聚氨酯互穿网络防腐蚀涂料

研制的环氧-聚氨酯互穿网络(IPN)防腐蚀涂料具有优异的防腐蚀性能和附着力。介绍了该涂料的制法。列举了IPN涂层的性能指标。讨论了影响涂层性能的各种因素。     

Polyurethane composites based on oil palm empty fruit bunches: Effect of isocyanate/hydroxyl ratio and chemical modification of empty fruit bunches with toluene diisocyanate and hexamethylene diisocyanate on mechanical properties

This study focuses on the effect of isocyanate (NCO)/hydroxyl (OH) group ratios and chemical modification of oil palm empty fruit bunches (EFBs) with toluene diisocyanate (TDI) and hexamethylene diisocyanate (HMDI) on the mechanical properties of EFB–polyurethane (PU) composites. The tensile, flexural, and impact properties are affected by the NCO/OH ratios. The tensile strengths, flexural strengths, and toughness increase as the NCO/OH increases; however, the modulus decreases. The reduction in the modulus is attributable to the increased flexibility of the PU linkages. Chemical modification of the EFBs increases the tensile strength, flexural strength, and toughness; however, the modulus is lowered as the percentage of treated EFB is increased. Impact strength results show that the strength increases as the NCO/OH ratio is increased. At NCO/OH ratios of 1.0 and 1.1, the composites with HMDI‐treated fibers exhibit higher impact strength than those with TDI‐treated and untreated fibers, respectively. This may be due to the longer and more flexible chain length of HMDI as compared to TDI, which enables the composites to absorb more energy before failure. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

古马隆树脂型聚氨酯防水涂料

介绍一种以古马隆树脂改性的新型双组分聚氨酯防水涂料，并对其原材料的选择、配方、生产工艺等方面进行了研究。     

低温烘烤型双组分水性聚氨酯涂料

采用溶液聚合法，合成了丙烯酸五元共聚物；将该共聚物中的羧基中和后制成丙烯酸多元醇分散体，将其作为B组分与一种低黏度的多异氰酸酯固化剂(A组分)组成双组分水性聚氨酯涂料。研究发现：引发剂含量、羟基含量、中和度以及A、B两组分混合搅拌方式都对双组分涂膜的性能产生重要影响。当引发剂含量为1％，羟基含量为2．7％，中和度为100％，A、B组分采用机械搅拌混合时所得的涂膜综合性能最好。水性涂料的适用期达到8h，超过相应的溶剂型涂料。     

高聚合度PVC／TPU共混物的制备与研究

本文研究了采用高聚合度聚氯乙烯(PVC)和热塑性聚氨酯(TPU)为主体材料制备高聚合度PVC/TPU共混物的过程,讨论了高聚合度PVC/TPU并用比、填料、增塑剂、共混工艺等因素对高聚合度PVC/TPU共混物性能的影响。     

Synthesis and physicochemical study of bisphenol‐C‐formaldehyde‐toluene diisocyanate polyurethane–jute and jute–rice husk/wheat husk composites

Bisphenol‐C‐formaldehyde‐toluene‐2,4‐di isocyanate polyurethane (PU) has been synthesized at room temperature and used for the fabrication of jute and jute–rice husk/wheat husk hybrid composites. PU–jute and PU–jute–RH/WH composites were prepared under pressure of 30.4 MPa at room temperature for 8 h, while PU–jute–RH/WH composites were prepared under same pressure at 110°C for 5 h. PU–jute composite has good tensile strength and flexural strength (50–53 MPa), while PU–jute–RH/WH hybrid composites have moderate tensile strength (9–11 MPa) and a fairly good flexural strength (15–31 MPa). Composites possess 1.1–2.2 kV electric strength and 0.94–1.26 × 10¹² ohm cm volume resistivity. Water absorption in PU–jute composite is different in water (9.75%), 10% HCl (12.14%), and 10% NaCl (6.05%). Equilibrium water uptake time in salt environment is observed 96 h, while in pure water and acidic environments it is 192 h. In boiling water equilibrium water content and equilibrium time are found to be 21.7% and 3 h, respectively. Water absorption increased 2.2 times in boiling water, whereas equilibrium time reduced 64 times. Thus, PU–jute composite has excellent hydrolytic stability against boiling water, 10% HCl, and 10% NaCl solutions. Fairly good mechanical and electrical properties and excellent hydrolytic stability of composites signify their usefulness for low cost housing units and in electrical and marine industries. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2363–2370, 2006     

纳米技术在聚氨酯胶粘剂中的应用及发展

概述了纳米复合聚氨酯胶粘剂的制备方法,综述了纳米技术在聚氨酯胶粘剂中的应用,并指出发展纳米技术的重要性。     

聚醚型聚氨酯的氢键、微相分离及性能

用本体一步法合成了5种不同硬段含量(11.0％～46.9％)的二苯甲烷-4,4′-二异氰酸酯/环氧乙烷封端型聚环氧丙烷聚醚/乙二醇的聚醚型聚氨酯,并借助于IR,DSC,DMS和材料试验机等手段对该聚氨酯的氢键、微相分离及力学性能进行了表征。结果表明:随着硬段含量的增加,其>NH与微区中的>C=O的氢键化程度逐渐提高,软段微区中—O—的氢键化程度逐渐降低;微相分离程度逐渐提高;拉伸强度及硬度随之增加,扯断伸长率在硬段含量40％左右出现极大值。     

水性聚氨酯/丙烯酸酯复合乳液的合成及其性能研究

通过自由基乳液聚合,合成具有核壳结构的水性聚氨酯/丙烯酸酯复合乳液(PUA)。用IR、DSC和TEM对产物结构进行了表征,证明水性聚氨酯(PU)与丙烯酸酯单体在实验条件下发生了共聚反应;考察了PVA乳液及其胶膜耐热性和耐溶剂性。结果表明具有核壳结构的PUA乳液的各项性能均比水性聚氨酯有明显提高。     

Interpenetrating polymer networks based on polyol modified castor oil polyurethane and poly(2‐ethoxyethyl methacrylate): Synthesis,chemical, mechanical,thermal properties,and morphology

Interpenetrating polymer networks (IPNs) of glycerol modified castor oil polyurethane (GC‐PU) and poly(2‐ethoxyethyl methacrylate) poly(2‐EOEMA) were synthesized using benzoyl peroxide as initiator and ethylene glycol dimethacrylate (EGDM) as crosslinker. GC‐PU/poly (2‐EOEMA) interpenetrating polymer networks were obtained by transfer molding. The novel GC‐PU/poly (2‐EOEMA) IPNs are found to be tough films. These IPNs are characterized in terms of their resistance to chemical reagents thermal behavior (DSC, TGA) and mechanical behavior, including tensile strength, Young's modulus, shore A hardness, and elongation. The morphological behavior was studied by scanning electron microscopy. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1029–1034, 2004