促进发电节能的可中断负荷电价优化设计模型

如果电力系统的备用容量完全有发电机组来承担,可能会产生长期"备而不用"的问题.这不仅会造成资源的浪费,也会导致用户购电成本的增加.通过供电公司与用户之间签订的合同,把用户的可中断负荷作为发电的一种备用,如果系统供给能量,则用户需要向供电公司支付电能价格;如果备用容量不足,系统中断时该用户的电力供给,但供电公司向用户进行其低谷用电的电价赔偿.可中断负荷电价的确定既要有利于发电成本的下降,又要有利于保护供电企业的利益,还要有利于激励用户减少高峰负荷用电的积极性.正是基于这样的目的而讨论可中断电价的优化设计模型.     

延长生焦时间对延迟焦化装置的影响

国内焦化装置的生焦时间几乎都采用24小时，设计的焦炭塔空高较大，在装置低负荷生产时，适当延长生焦时间，不仅可降低装置的运营成本、提高焦炭质量、降低劳动强度，而且还可降低维修费用。安庆焦化成功地在一套装置上实现了48小时生焦操作，年运行200天，增效约100万元。     

On the oxidation kinetics and mechanisms of various SiC-coated carbon-carbon composites

SiC coatings on the surface of C-C were produced by either silicone resin impregnation/ pyrolysis or reaction sintering. Cycles of resin impregnation/pyrolysis produced an SiC coating, on the walls of fine open pores, which was effective in reducing the oxidation rate of C-C and in shifting the transition temperature to a higher value. Unless it is pre-coated with a pyrocarbon layer before sintering, plain reaction sintered SiC has oxidation behaviors similar to those of the above-mentioned SiC. The dense pyrocarbon film deposition on the surface of C-C could form a better SiC film than others. The carbon film homogenized the surface of C-C and a dense SiC film was established. The oxidation of the coated C-C can be modelled by a set of “oxidation resistors” in series and/or in parallel, with each resistor corresponding to an oxidation element. The controlling mechanism can be resolved from the activation energy. A combined resistant layer, consisting of resin impregnation, pyrocarbon film and reaction sintering SiC, showed the best oxidation resistance of any single-layer coated C-C composite.     

ZrO2对CaO-SiO2系玻璃析晶的影响

通过DSC曲线研究了不同含量的ZrO2对CaO-SiO2系玻璃析晶的影响,根据JMA方程计算动力学参数(如析晶活化能E、频率因子ν、晶化指数n)。从计算结果可以看出,随着ZrO2含量的增加,析晶活化能E减少,而频率因子ν和晶化指数n增加。当ZrO2含量为7%时,E值最小:235.58kJ/mol;n值最大:4.70。说明ZrO2在CaO-SiO2玻璃体系是有效的晶核剂。     

酒店暖通设计中的节能措施探讨

以巢湖半汤国际温泉假日酒店暖通设计为例,分别从空调系统的划分,冷热源及输配系统的选择,空调末端系统的选择,以及热回收技术等方面对酒店暖通设计中的节能策略进行了分析和探讨。     

Dynamic buffering performance of the honeycomb paperboard filled with polyurethane

A new kind of composite buffering material was made by filling the voids of honeycomb paperboard with polyurethane. Drop tests were performed to evaluate the dynamic energy absorption capacity of the material. Based on the tests results, we analyzed the mechanical behaviors of the material under different conditions and obtained the inherent influencing laws of some factors on the material＇s dynamic buffering performance. It was shown that the dynamic buffering performance varied directly with impact velocity, and inversely with the void diameter, thickness and buffeting area of the composite material.     

Specific energy optimization in sawing of rocks using Taguchi approah简

This work aims at selecting optimal operating variables to obtain the minimum specific energy （SE） in sawing of rocks. A particular granite was sampled and sawn by a fully automated circular diamond sawblades. The peripheral speed, the traverse speed, the cut depth and the flow rate of cooling fluid were selected as the operating variables. Taguchi approach was adopted as a statistical design of experimental technique for optimization studies. The results were evaluated based on the analysis of variance and signal-to-noise ratio （S/N ratio）. Statistically significant operating variables and their percentage contribution to the process were also determined. Additionally, a statistical model was developed to demonstrate the relationship between SE and operating variables using regression analysis and the model was then verified. It was found that the optimal combination of operating variables for minimum SE is the peripheral speed of 25 m/s, the traverse speed of 70 cm/min, the cut depth of 2 cm and the flow rate of cooling fluid of 100 mL/s. The cut depth and traverse speed were statistically determined as the significant operating variables affecting the SE, respectively. Furthermore, the regression model results reveal that the predictive model has a high applicability for practical applications.     

Self-excited vibration problems of maglev vehicle-bridge interaction system

The self-excited vibration problems of maglev vehicle-bridge interaction system were addressed, which greatly degrades the stability of the levitation control, decreases the ride comfort, and restricts the cost of the whole system. Firstly, the coupled model containing the quintessential parts was built, and the mechanism of self-excited vibration was explained in terms of energy transmission from levitation system to bridge. Then, the influences of the parameters of the widely used integral-type proportion and derivation（PD） controller and the delay of signals on the stability of the interaction system were analyzed. The result shows that the integral-type PD control is a nonoptimal approach to solve the self-excited vibration completely. Furthermore, the differential-type PD controller can guarantee the passivity of levitation system at full band. However, the differentiation of levitation gap should be filtered by a low-pass filter due to noise of gap differentiation. The analysis indicates that a well tuned low-pass filter can still keep the coupled system stable.     

市场机制下建筑节能相关利益主体博弈研究

充分发挥市场机制对节能产品的调控作用是市场经济的基本内容。通过对建筑节能市场发展中存在的相关问题研究,发现我国建筑节能市场的外部性和信息不对称性是产生问题的根源。全面分析建筑节能市场中政府、开发商、消费者以及其他服务组织等利益主体对市场培育的核心作用,通过构建政府与开发商、开发商与消费者之间的动态博弈模型,研究相关利益主体进一步完善建筑节能市场应采取的对策。     

“双储”模式下的节能控制在小区供水系统中的应用

根据城市居民对供水的可靠性、稳定性、经济节能性的需求,课题组提出了一种基于"双储"模式的供水系统,并按照本市德胜住宅小区的供水要求,设计了一套由储水池、气压罐、变频器、多台水泵机组等主要设备构成的全自动变频恒压供水系统.经过近半年的运行测试,系统有效地解决了传统供水方式中存在的问题,增强了系统的总体性能,有明显的节能效果.