Development of a nonlocal convective mixing scheme with varying upward mixing rates for use in air quality and chemical transport models

BACKGROUND, AIM, AND SCOPE: Asymmetrical convective non-local scheme (CON) with varying upward mixing rates is developed for simulation of vertical turbulent mixing in the convective boundary layer in air quality and chemical transport models. MATERIALS AND METHODS: The upward mixing rate form the surface layer is parameterized using the sensible heat flux and the friction and convective velocities. Upward mixing rates varying with height are scaled with an amount of turbulent kinetic energy in layer, while the downward mixing rates are derived from mass conservation. RESULTS: This scheme provides a less rapid mass transport out of surface layer into other layers than other asymmetrical convective mixing schemes. DISCUSSION: In this paper, we studied the performance of a nonlocal convective mixing scheme with varying upward mixing in the atmospheric boundary layer and its impact on the concentration of pollutants calculated with chemical and air-quality models. This scheme was additionally compared versus a local eddy-diffusivity scheme (KSC). Simulated concentrations of NO(2) and the nitrate wet deposition by the CON scheme are closer to the observations when compared to those obtained from using the KSC scheme. CONCLUSIONS: Concentrations calculated with the CON scheme are in general higher and closer to the observations than those obtained by the KSC scheme (of the order of 15-20%). Nitrate wet deposition calculated with the CON scheme are in general higher and closer to the observations than those obtained by the KSC scheme. RECOMMENDATIONS AND PERSPECTIVES: To examine the performance of the scheme, simulated and measured concentrations of a pollutant (NO(2)) and nitrate wet deposition was compared for the year 2002. The comparison was made for the whole domain used in simulations performed by the chemical European Monitoring and Evaluation Programme Unified model (version UNI-ACID, rv2.0) where schemes were incorporated.     

工业用制氧机噪声控制方案

在大型炼钢生产工艺过程中,需要制备大量的氧气.由于空气流量大,制氧机进口噪声大,对周围环境和工作人员造成了极大的危害.对某钢铁集团制氧机的噪声源进行了分析,并在现场调查的基础上,提出了制氧机噪声治理方案.经过测试,治理后的厂界噪声指标达到国家标准的控制要求.     

信息可视化在化工企业大气环境影响评价中的研究及应用

运用data system.exe技术,提出大气环境影响评价信息可视化软件的设计方法,建立了大气环境污染因子数据信息可视化模型,应用该成果对某石油化工企业大气环境进行初步风险评价,结果表明:通过输入大气环境污染因子监测值,系统可自动判定大气环境的污染程度,并把对应环境质量的级别、环境的安全程度以及污染对人体与生物的影响程度在图中显示出来,能有效地提高环境影响评价的可靠度。该软件能在识别污染因子数据信息的同时生成与之相匹配的直观的模拟环境图像,有助于管理者进行及时分析与决策,建立的环境污染因子数据信息可视化软件具有很强的适用性。同时对政府部门制定环保工作决策具有重要的参考价值。     

基于大气环境箱式模型对成都平原城市群主要城市空间发展的评价分析

本文讨论了大气环境箱式模型的两种表达方式在成都平原城市群规划中的适用性,并采用箱式模型计算成都平原城市群主要城市的大气环境容量,通过对不同假设条件的用地布局方案的大气环境容量计算和比较,对规划方案确定的南北轴线主要城市空间发展提出了限制性条件,使规划方案符合大气环境容量的要求,以确保环境空气质量目标的实现.     

城市大气颗粒物表面半醌自由基的测定方法

采集上海市城区和郊区2个典型站位的大气颗粒物样品,以二氯甲烷作萃取溶剂,采用索氏抽提法萃取分离吸附在颗粒物表面的稳定自由基,并利用电子自旋共振波谱技术(ESR)分析测定其种类和浓度。结果表明,测试样品的波谱特征表现为显著的三重信号峰,且g因子值均为2.002 7~2.004 7,通过与醌类物质的碱性饱和溶液ESR图谱比对,可以推断颗粒物表面至少吸附一种邻位半醌自由基。同时,通过锰标定量的方式估算了闵行和普陀2个采样点颗粒物样品表面的半醌自由基浓度,闵行采样点TSP、PM10和PM2.5表面半醌自由基的平均浓度分别为5.02×105、5.54×105、9.43×105g-1,而普陀采样点的平均浓度分别为2.02×105、3.50×105、7.16×105g-1。     

吐鲁番市大气污染趋势及防治措施初探

通过对吐鲁番市城市环境质量三项大气主要污染物变化趋势进行调查分析,结果表明：吐鲁番市环境空气质量呈恶化趋势,大气污染物中PM10浓度呈上升趋势,SO 2呈略微上升趋势,NO2无显著变化。 PM10浓度在冬季采暖期和春秋季（4月）较高,为防治吐鲁番市空气质量变劣,急需采取积极有效的预防措施,切实保护好吐鲁番市人民赖以生存的空气环境。     

The Use of Atmospheric Dispersion Models in Risk Assessment Decision Support Systems for Pesticides

In the evaluation of potentially adverse effects oforganic chemicals such as pesticides on theenvironment the atmosphere may play an important role.After its release to the atmosphere the chemical willbe transported/dispersed in the atmosphere and finallyit will be removed either by atmospheric-chemicaldestruction or by deposition to the underlying soil orsurface water. In a risk assessment decision supportsystem both ambient concentrations and depositionfluxes must be known to evaluate the risk of directexposure (inhalation) or the risk of soil and watercontamination caused by deposition. This paperdiscusses the use of atmospheric dispersion models insuch risk assessment decision support systems.     

厂界噪声背景值修正问题的讨论

在实际计算中 ,按照国家标准 (GB1 2 3 4 9-90 )扣除背景噪声值常常会与待测声源的实际声级值产生较大的误差。利用对噪声源的实际测量数据 ,探讨这种误差产生的原因及结果 ,并建议今后采用计算结果列表查找或者直接用公式计算的方法扣除背景噪声 ,以消除因数据处理不当而产生的误差。     

不同粒径空气颗粒物中11种多环芳烃的分析测定

将五段多孔冲击分级器 (粒径分级 :≤ 1 .1 ,1 .1～ 2 .0 ,2 .0～ 3 .3 ,3 .3～ 7.0 ,≥ 7.0μm)与大流量采样器连接 ,采集呼和浩特市冬夏两季空气颗粒物样品 ,用高压液相色谱仪 (HPLC)测定样品中的蒽 (An)、菲 (Ph)、萤蒽 (Fl)、芘 (Py)、(Ch)、苯并 [a]蒽 (Ba A)、苯并 [a]芘 (Ba P)、二甲基苯并 [a]蒽 (DMBa A)、二苯并 [ah]蒽 (DBah A)、苯并 [ghi] (Bghi P)和晕苯 (Cor)等 1 1种多环芳烃化合物 (PAHs)。数据表明 :呼和浩特市空气颗粒物中 PAHs的浓度较高 ;有约 97%的 PAHs富集于可吸入颗粒中。     

气溶胶中有机物的研究进展和前景

首先指出了气溶胶中有机物的研究意义 ,接着介绍了目前对气溶胶中有机物的化学组成、来源和成因、环境和健康效应的认识 ,综述了分析测试方法的研究现状 ,并评述了其研究前景