尿素包合法分离橡胶籽油中的多价不饱和脂肪酸

用尿素包合法从橡胶籽油混合脂肪酸中分离多价不饱和脂肪酸 ,用正交设计实验法对分离工艺进行研究 ,其最佳分离条件是 :原料配比为m(混合脂肪酸 )∶m(尿素 )∶m(乙醇 ) =1 0 0∶1 5∶1 8,回流时间 12 0min。经一次尿素包合法分离即可得到多价不饱和脂肪酸质量分数大于90 %的产品 ,实验收率大于 35 %     

Countercurrent approach to the enrichment of Δ9c,11t-and Δ10t,12c-18:2 isomers by urea complexation

CLA refers to a group of geometrical and positional isomers of linoleic acid. CLA has been shown to have potentially beneficial effects on cancer, atherosclerosis, and body metabolism in animals. Mixtures containing equal amounts of these isomers are commonly used in many research studies because of their greater availability and lower cost relative to pure isomers. This has hindered progress in elucidating the biological properties of specific isomers and their relevance in animal and human biology. A method was developed that offers a compromise between cost and utility to make available enriched mixtures of either the Δ9c,11t- or Δ10t,12c-18:2 isomers for use in a wide range of experimental applications. A countercurrent approach was developed to separate the Δ9c,11t- and Δ10t,12c-18:2 isomers from an equal mixture of these two isomers by urea complexation. After three successive rounds of complexation using an equal amount of CLA and urea, a fraction enriched in Δ9c,11t-18:2 containing 42.5 and 17.4% of Δ9c,11t-and Δ10t,12c-18:2, respectively, was recovered. After a single round of complexation using 2.5 g urea/g CLA, a fraction enriched in Δ10t,12c-18:2 was recovered containing 29.7 and 69.1% of Δ9c,11t- and Δ10t,12c-18:2, respectively.     

尿素合成塔出口弯管爆管分析

对尿素分厂发生弯管爆管事故的原因进行了分析 ,并提出具体的防范措施     

水溶性芯模材料的制备与性能研究

采用黄糊精、空心玻璃微珠与尿素等材料,通过共混模压工艺制备了新型的水溶性芯模材料,对其进行了压缩强度、水溶性等性能测试,分析了影响该芯模材料性能的因素。结果表明,将空心玻璃微珠的用量控制在总量的10%左右,尿素的用量控制在总量的6%左右,可获得性能最优的水溶芯模材料;所制得的水溶芯具有强度高、表面光洁、水溶性好、性能稳定、成本低等优点。     

Guayule seedling response to nitrogen fertilizers

Slow growth and high seedling mortality limit direct seeding establishment of guayule (Parthenium argentatum G.). This study was conducted to assess seedling growth enhancement by the addition of different rates and forms of N fertilizers and Ca salts. Experiments were conducted in a greenhouse with cultivar 593 under both surface and subirrigated conditions using water low in salts (salinity of 0.8 dSm^–1, SAR of 5.0 and 10 mg Ca L^–1). Under surface-irrigated conditions, seedling height and fresh plant weight increased with N application to the irrigation water to 70 mg L^–1. The best seedling growth was observed when (NH₄)₂SO₄ was added in combination with CaCl₂ or CaSO₄. Progressively less growth was observed by addition of (NH₄)₂SO₄ alone, CO(NH₂)₂ plus CaSO₄, CO(NH₂)₂ alone and Ca(NO₃)₂. When seedlings were subirrigated, however, the best growth was observed with Ca(NO₃)₂. Intermediate growth was obtained with (NH₄)₂SO₄ plus CaSO₄ and lowest growth rates with (NH₄)₂SO₄ alone. These differential responses may be explained by the differences in leaching and volatile characteristics of the N forms. Growth enhancement from N and Ca additions increased with time with significant increases 45 days after seeding. Nitrogen application with Ca may be effective amendment in promoting subsequent growth of direct seeded guayule.     

尿素装置液相浓度在线自动检测软件的研究

为了改善尿素装置先进的控制和落后的人工检测物料浓度之间的矛盾，运用化工热力学原理，以及热力学模型组合求解法，研制了液相浓度实时检测软件。并开发了多种软件以适应各类尿素流程（水溶液全循环法、ＣＯ２汽提法、氨汽提法）的需要     

熔体塔式造粒法生产尿基复混肥

化肥企业生产尿基复混肥对于农业科学施肥、提高肥料利用率、避免环境污染及促进企业产品结构调整都具有十分重要的意义。熔体塔式造粒法生产尿基复混肥较之其它方法优越性更为显著,笔者简要介绍该法的生产机理、工艺流程、技术特点、国内现状及产品市场前景等方面的一些情况。     

羟基磷酸铁铵的制备与表征

采用硫酸亚铁和磷酸为原料,在尿素存在的条件下,水热合成得到高纯度的羟基磷酸铁铵。研究发现,反应温度不同得到的羟基磷酸铁铵的结晶度会有所不同,形貌差异较大。利用XRD、SEM、TG-DTA和红外分析等手段对制备的样品组成、结构、晶型和形貌做分析表征,分析了羟基磷酸铁铵在加热过程中的相变过程。结果表明,在静态羟基磷酸铁铵中,磷酸和铁具有固定的化学计量比,经高温煅烧后得到高纯度磷酸铁,可应用其制备锂离子电池正极材料磷酸铁锂的前驱体,且此法合成工艺简单,具有良好的工业应用潜质。     

尿素分解加热器清洗剂的研制和应用小结

针对一分加污垢的特点，通过实验，研制了以有机酸为主要成份的尿素分解加热器清洗剂及清洗工艺，并进行了４台次加热器的清洗，取得了较好的效果。此清洗方法具有工艺简单、安全、分析控制容易、费用低廉的特点。     

尿素醇解法合成氨基甲酸乙酯的研究

对尿素醇解法合成氨基甲酸乙酯工艺进行了系统地研究,全面考察了反应温度、原料配比、反应时间及搅拌速度等因素对反应性能的影响。研究发现在反应温度为140℃,乙醇与尿素的摩尔比为4∶1,反应3.5 h,氨基甲酸乙酯最高收率为79.2%。