Synthesis of polyethylene oxide end‐capped with perfluoroalkyl groups/polystyrene prototype brushes

Polystyrene (PS)/poly(ethylene oxide) (PEO) prototype brushes were prepared by alternating free‐radical copolymerization of methacryloyl‐terminated PS and α‐vinylbenzyl‐ω‐hydroxy or α‐vinylbenzyl‐ω‐perfluoroalkyl (R_f) PEO macromonomers with the addition of Lewis acid (SnCl₄). It was found from their dilute‐solution properties that PS/PEO end‐capped with R_f (PBR_f), and PS/PEO having OH groups at terminal ends (PBOH) prototype brushes formed a single molecule in benzene and aggregates in chloroform, respectively. However, the brush PBOH formed a single molecule in N,N‐dimethylformamide. Such aggregation behaviors seemed to be caused by the interaction between hydroxy groups of PEO chain ends. The brush PBOH was also converted into PBR_f‐type brush by chemical modification, using corresponding acid chloride. The substitution of R_f groups was ～70% due to slipping of terminal hydroxy groups into PEO internal domains. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 772–778, 2006     

Electrochemical reduction of nitrate on Pt(S)[n(1 1 1) × (1 1 1)] electrodes in perchloric acid solution

The electrochemical reduction of nitrate ion was studied by cyclic voltammetry on Pt(1 1 1) and [n(1 1 1) × (1 1 1)] stepped Pt surfaces, where n (=14, 10, 7, 6, 5, 4, 3, 2) is the number of terrace atoms, in 0.1 M HClO₄ + 10 mM KNO₃. The electrocatalytic nitrate reduction was found to hardly proceed on Pt(1 1 1) in the hydrogen adsorption region, while the electrocatalytic activity was improved with the increase in the step density. Inactivation was observed in the presence of adsorbed hydrogen or nitrate-derived reduced adsorbate, i.e. adsorbed NO, on (1 1 1) step sites. It was, therefore, concluded that the electrocatalytically active NO₃⁻ species does not adsorb on the (1 1 1) terraces but on the (1 1 1) monoatomic steps. The nitrate reduction current increased with the step density in a non-linear relationship. The overall current density at 0.21 V (RHE) corresponding to the peak potential of the main electrocatalytic nitrate reduction wave which was maximum at n = 2, abruptly increased with short terraces, i.e. n < 5, where the current wave of adsorbed hydrogen on the Pt stepped surface with comparatively narrow (1 1 1) terraces, denoted as H_nt, also appeared unmodified for n < 5 on voltammograms recorded in 0.1 M HClO₄ in the absence of nitrate.     

基于GPS/GIS的公共安全监测系统的研究

GPS技术在公共安全监测领域中的应用正向高精度、实时化和自动化的方向发展。GPS公共安全监测不仅注重结果,还要分析产生变形的原因。要实现这一目标,就需要借助于G IS的空间分析功能,即需要建立一种基于GPS/G IS的公共安全监测系统。研究了GPS监测的似单差数学模型和算法流程,由于该模型只用到L1载波相位观测值及伪距,因此可适用于单频接收机,从而降低监测成本。同时,结合GPS公共安全监测的特点,提出了GPS/G IS公共安全监测系统的技术路线。     

Torque Transmission Capabilities of Bonded Polygonal Lap Joints for Carbon Fiber Epoxy Composites

Although carbon fiber epoxy composite materials have excellent properties for structures, the joint in composite materials often reduces the efficiency of the composite structure because the joint is often the weakest area in the composite structure.

In this paper, the effects of the adhesive thickness and the adherend surface roughness on the static and fatigue strengths of adhesively-bonded tubular polygonal lap joints have been investigated by experimental methods. The dependencies of the static and fatigue strengths on the stacking sequences of the composite adherends were observed.

From the experimental investigations, it was found that the fatigue strength of the circular adhesively-bounded joints was quite dependent on the surface roughness of the adherends and that polygonal adhesively-bonded joints had better fatigue strength characteristics than circular adhesively-bonded joints.     

过磷酸钙含氟尾气处理的新方法

对动态泡沫床处理过磷酸钙含氟尾气的有关技术及费用作了说明 ,指出该方法费用高 ;提出一种新方法 ,该方法不加任何化学助剂 ,采用水作吸收剂 ,只需改变动态泡沫床一些设计参数和选用一种特殊的喷头 (喷头周围设计 1个圆锥形死角区 ,使含氟气体不可能进入该区 )避免了硅胶堵塞。该方法已在湖南浦市化工总厂运行 1年多未发现堵塞 ,同时该法投资少、能耗低、排放尾气达标     

负摩阻力计算及对桩承载力的影响

探讨了负摩阻力的计算方法及考虑负摩阻力时对桩承载力的验算，对软土层超过１５米，上部堆载大或地下水位大幅度下降地区的桩，尤其是端承桩而言，具有较大的工程实际意义。     

GRM-2SD120棉线缠绕机

介绍了GRM－2SD120棉线缠绕机的结构原理，重点介绍了该机的锭子部分，口型部分，锭子盘，中胶部分，传动原理，电气原理及主要技术参数。     

单扫描极谱法快速测定胱氨酸的研究及应用

在pH 9.6的H3BO3-NaOH介质中,胱氨酸于-0.56 V(vs.SCE)处产生一灵敏的吸附还原波。用于胱氨酸的测定,波高与0.8~10μmol/L的胱氨酸有线性关系,检测限为0.4μmol/L。许多氨基酸在较高浓度共存情况下不干扰胱氨酸的测定。应用该法测定了人发及胱氨酸片剂中胱氨酸的含量。     

Structure of Atomic and Molecular Adsorbates on Low-Miller-Index ZnO Surfaces Using X-ray Absorption Spectroscopy

We review our X-ray absorption spectroscopy studies of adsorbate geometries on the O-terminated (000 ) and Zn-terminated (0001) basel faces, as well as the non-polar (10 0) prism face of ZnO. Studies employing near-edge X-ray absorption fine-structure (NEXAFS) and surface X-ray absorption fine-structure (SEXAFS) are included.     

一种检测单晶炉热场温度的新方法

为去除单晶炉热场温度测量信号中的低频干扰、提高温度信号的估计精度,本文提出了一种基于跨维模拟退火(trans dimensional simulated annealing,TDSA)的单晶炉热场温度检测方法.该方法首先将AIC(Akaike information criterion)信号个数判断准则纳入采样机制中以便对干扰个数采样估计,进而利用所设计的基于信号频谱和轮盘赌思想的Metropolis Hastings机制对相应个数的干扰频率进行采样,最后设计了混合均匀和高斯采样机制对单晶炉热场温度进行采样估计.仿真和单晶炉工程实验结果表明,该方法在干扰个数未知的情况下,能够有效地抑制低频干扰、准确检测单晶炉热场的温度.