Petri net based process scheduling: A model of the control system of flexible manufacturing systems

In this paper, we propose a class of algorithms for the sub-optimal solution of a particular class of problems of process scheduling, particularly focusing on a case study in the area of flexible manufacturing systems (FMSs). The general class of problems we face in our approach is characterized as follows: there is a set of concurrent processes, each formed by a number of temporally related tasks (segments). Tasks are executable by alternate resource sets, different both in performance and costs. Processes and tasks are characterized by release times, due dates, and deadlines. Time constraints are also present in the availability of each resource in resource sets. It has been proven that such a problem does not admit an algorithm for an optimal solution in polynomial time. Our proposed algorithm finds a sub-optimal schedule according to a set of optimization criteria, based on task and process times (earliness, tardiness), and/or time independent costs of resources. Our approach to process scheduling is based on Timed Coloured Petri Nets. We describe the structure of the coordination and scheduling algorithms, concentrating on (i) the general-purpose component, and (ii) the application-dependent component. In particular, the paper focuses on the following issues: (i) theautomatic synthesis of Petri net models of the coordination subsystem, starting from the problem knowledge base; (ii) the dynamic behavior of the coordination subsystem, whose kernel is a High Level Petri net executor, a coordination process based on an original, general purpose algorithm; (iii) the structure of the real-time scheduling subsystem, based on particular heuristic sub-optimal multi-criteria algorithms. Furthermore, the paper defines the interaction mechanisms between the coordination and scheduling subsystems. Our approach clearly distinguishes the mechanism of the net execution from the decision support system. Two conceptually distinct levels, which correspond to two different, interacting implementation modules in the prototype CASE tool, have been defined: theexecutor and thescheduler levels. One of the outstanding differences between these levels is that the executor is conceived as a fast, efficient coordination process, without special-purpose problem-solving capabilities in case of conflicts. The scheduler, on the other hand, is the adaptive, distributed component, whose behavior may heavily depend on the problem class. If the scheduler fails, the executor is, in any case, able to proceed with a general-purpose conflict resolution strategy. Experimental results on the real-time performance of the kernel of the implemented system are finally shown in the paper. The approach described in this paper is at the basis of a joint project with industrial partners for the development of a CASE tool for the simulation of blast furnaces.     

An efficient heuristic for scheduling batches of parts in a flexible flow system

Flexible manufacturing systems (FMSs) are a class of automated systems that can be used to improve productivity in batch manufacturing. Four stages of decision making have been defined for an FMS—the design, planning, scheduling, and control stages. This research focuses on the planning stage, and specifically in the area of scheduling batches of parts through the system.The literature to date on the FMS planning stage has mostly focused on the machine grouping, tool loading, and parttype selection problems. Our research carries the literature a step further by addressing the problem of scheduling batches of parts. Due to the use of serial-access material-handling systems in many FMSs, the batch-scheduling problem is modeled for a flexible flow system (FFS). This model explicitly accounts for setup times between batches that are dependent on their processing sequence.A heuristic procedure is developed for this batch-scheduling problem—the Maximum Savings (MS) heuristic. The MS heuristic is based upon the savings in time associated with a particular sequence and selecting the one with the maximum savings. It uses a two-phase method, with the savings being calculated in phase I, while a branch-and-bound procedure is employed to seek the best heuristic solution in phase II. Extensive computational results are provided for a wide variety of problems. The results show that the MS heuristic provides good-quality solutions.     

A Stronger Complexity Result for the Single Machine Multi-Operation Jobs Scheduling Problem to Minimize the Number of Tardy Jobs

We consider the single machine multi-operation jobs scheduling problem to minimize the number of tardy jobs. Each job consists of several operations that belong to different families. In a schedule, each family of job operations may be processed in batches with each batch incurring a setup time. A job completes when all of its operations have been processed. The objective is to minimize the number of tardy jobs. In the literature, this problem has been proved to be strongly NP-hard for arbitrary due-dates. We show in this paper that the problem remains strongly NP-hard even when the due-dates are common and all jobs have the same processing time.     

Proactive resource allocation for asynchronous real-time distributed systems in the presence of processor failures

We present two proactive resource allocation algorithms, RBA^*-FT and OBA-FT, for fault-tolerant asynchronous real-time distributed systems. The algorithms consider an application model where task timeliness is specified by Jensen's benefit functions and the anticipated application workload during future time intervals is described by adaptation functions. In addition, we assume that reliability functions of processors are available a priori. Given these models, our objective is to maximize aggregate task benefit and minimize aggregate missed deadline ratio in the presence of processor failures. Since determining the optimal solution is computationally intractable, the algorithms heuristically compute sub-optimal resource allocations, but in polynomial time. Experimental results reveal that RBA^*-FT and OBA-FT outperform their non-fault-tolerant counterparts in the presence of processor failures. Furthermore, RBA^*-FT performs better than OBA-FT, although OBA-FT incurs better worst-case and amortized computational costs. Finally, we observe that both algorithms robustly withstand errors in the estimation of anticipated failures.     

半导体晶圆制造车间层控制的内容及方法

半导体晶圆制造企业是资本密集、技术密集型产业,晶圆制造厂也是公认生产最为复杂的工厂之一。产品更新换代快、市场竞争激烈等特点使得投资者对设备产能和设备利用率高度重视。这已不仅仅是技术问题,而是生产制造过程管理的问题。本文介绍了半导体晶圆制造车间层控制的内容及方法。     

Location and calculation-free node-scheduling schemes in large wireless sensor networks

In wireless sensor networks that consist of a large number of low-power, short-lived, unreliable sensors, one of the main design challenges is to obtain long system lifetime without sacrificing system original performance (sensing coverage and sensing reliability). To solve this problem, one of the potential approaches is to identify redundant nodes at the sensing interface and then assign them an off-duty operation mode that has lower energy consumption than the normal on-duty mode. In our previous work [J. Wireless Commun. Mobile Comput. 3 (2003) 271; Processing of ACM Wireless Sensor Network and Application Workshop 2002, September 2002], we proposed a node-scheduling scheme, which can provide a 100% sensing coverage preservation capability. This, however, requires each node to be aware of its own and its neighbors’ location information. Also, in that scheme, each node has to do accurate geometrical calculation to determine whether to take an off-duty status. In this paper, we propose and study several alternative node-scheduling schemes, which cannot completely preserve the original system coverage, but are nonetheless light-weighted and flexible compared with the previous one. Our simulation results compare these schemes with the previous one and demonstrate their effectiveness.     

CAM中一类新的NP完全问题

本文提出了计算机辅助制造(CAM)中的一类作业调度问题并证明了它的NP完全性。     

Scheduling in or-parallel Prolog systems: Survey and open problems

Implementation of or-parallel Prolog systems offers a number of interesting scheduling problems. The main issues are the interaction between memory models and scheduling, ordering of multiple solutions, and scheduling of speculative work. The problems occur partly because of the design choices (e.g. the choice of a memory model), and partly because of the desire to maintain observational equivalence between parallel and sequential implementations of Prolog, while achieving high efficiency. In the first part of this paper a common framework for discussing scheduling in or-parallel systems is introduced, and also a collection of issues that must be addressed in such systems is presented. In the second part of the paper we survey a number of solutions to these problems comparing their efficiency whenever possible. We close the survey with a short discussion of open problems.Current association: Carlstedt Elektronik AB     

Parallelization of WHILE loops on pipelined architectures

Modulo scheduling theory can be applied successfully to overlap Fortran DO loops on pipelined computers issuing multiple operations per cycle both with and without special loop architectural support. This paper shows that a broader class of loops—REPEAT-UNTIL, WHILE, and loops with more than one exit, in which the trip count is not known beforehand—can also be overlapped efficiently on multiple-issue pipelined machines. The approach is described with respect to a specific machine model, but it can be extended to other models. Special features in the architecture, as well as compiler representations for accelerating these loop constructs, are discussed. Performance results are presented for a few select examples.An earlier version of this paper was presented at Supercomputing '90.     

一个改进的单抓钩周期性排序模型及其在自动化学处理线中的应用

计算机控制的抓钩广泛用于自动化学处理线的工件的运送。抓钩的排序直接影响系统的生产率，抓钩排序的目标是对运送进行排序以极大化生产率。当某工序处理时间非常长时，该工序成为瓶颈。为了去除该瓶颈，系统可以为该工序设计多个处理槽，这称为“多重处理槽”问题。本文提出一个改进的混合整数规划模型以求解有“多重处理槽”的单抓钩周期性排序问题的最优解。实例表明所提出的方法是有效的。