沁水盆地煤层气钻井工艺方法

针对沁水盆地煤层气概况,地层情况及开采条件,介绍了参数井、生产井、多分支地面煤层气水平开发井、丛式井等钻井工艺、钻具组合、井身结构及井身质量要求.     

黄土坡面侵蚀产沙时空演变的REE示踪技术研究

室内交叉布设不同的稀土氧化物,通过人工模拟次降雨,在同一试验条件下,对坡面侵蚀沿顺坡方向和深度方向的演变过程同时展开研究。结果表明:REE示踪技术对定量研究土壤侵蚀具有较高的精度;降雨前期,片蚀与细沟侵蚀发育程度基本相当;后期细沟侵蚀占据坡面侵蚀的主导地位,其侵蚀平均加速度和平均侵蚀率分别是片蚀的15倍、9倍;试验结束,细沟侵蚀占据坡面总侵蚀的90%;本试验条件下,坡面下1/3区域为侵蚀活跃带。     

1999年杭嘉湖平原一次连续暴雨过程诊断分析

用新的曲面拟合法(NMOCSF)对江淮和杭嘉湖平原一次连续暴雨过程作物理诊断，结合天气形势讨论了准静止华北高压的形成及其对江淮和杭嘉湖平原连续暴雨的贡献。指出，当江淮和杭嘉湖平原处在梅雨期时，应特别注意华北高压的强度和位置，一旦构成阻塞形势，就极可能发生大范围、持续性的强降水过程。     

公路边坡工程监测技术评价与分析

结合公路工程、建筑工程等土木工程建设中经常涉及到的边坡工程,评价与分析边坡工程监测的作用、内容和方法,提出了边坡工程应该在工程项目开展的开始阶段就应进行和边坡工程监测的项目,选择原则,测点布置原则、监测周期等,对边坡工程建设具有重要的意义.     

A non-linear stress-stiffness model for geomaterials at small to intermediate strains

A double exponential fitting model (DEFM) capable of expressing the non-linear stress-stiffness relationship of geomaterials has been proposed by Shibuya et al. (1997). The model comprises two material constants; the elastic stiffness at very small strains and the strength, together with other free parameters to determine the complete stress-stiffness relationship. In this paper, the capability of the original function used for DEFM in simulating the tangent stiffness-stress relationship of geomaterials is first discussed. Second, the methods for determining the free model parameters, as well as its conversion to obtain a stress-strain relationship are proposed. The applicability of DEFM to predicting non-linear stress-stiffness relationship is examined in detail in a total of forty-nine fitting cases of compression test data on sedimentary rock, artificial soft rock and soft clay. It is found that the DEFM is effective in expressing the non-linear stress-stiffness relationship of various kinds of geomaterials at small to intermediate strains, say less than 0.5%. The superiority of this model compared to other fitting models currently in use is also demonstrated in some of the fitting cases.     

Analyzing CO2 emissions mitigation by technology improvement in Central and Eastern Europe

As a legacy of the centrally planned economy, the economies in transition of Central and Eastern Europe (CEE) have a unique potential to reduce their greenhouse gas emissions through the improvement in their high energy intensities. Since much of this `low-hanging fruit' in energy-efficiency improvements can be highly cost-effective, many developed countries facing difficulties in meeting their greenhouse gas (GHG) emission targets domestically are eager to find such opportunities in the CEE region. Therefore, studies analysing the potentials and costs of carbon dioxide reduction through technology improvement in the region have come into the limelight. While there are a few excellent studies in the region aimed at analysing climate change abatement potentials, they all embark on different assumptions, methodologies and boundary conditions. It is hence difficult, if not impossible, to compare and analyse the results of these studies across different authors, countries or time horizons. Consequently, the purpose of this paper is to place four leading studies on GHG mitigation through technology improvement from the CEE region into an internationally comparable framework. Four studies were selected from three countries, Poland, Hungary and Estonia, which are all the results of major national and international efforts to assess costs and potentials of GHG reduction. The paper places their assumptions, methods and final results into a framework which enables policy-makers and project designers to compare these across geographical and technological boundaries. Since other studies from around the globe have been analysed in this framework in the literature, this paper provides a vehicle for the findings of these four studies to be compared to others worldwide. In addition, the paper highlights a few areas where similar studies to be completed in the future in the region may be enhanced by incorporating features used in GHG mitigation research in other parts of the world. This revised version was published online in July 2006 with corrections to the Cover Date.     

数字化射线照相技术对轻物质的判断

本文介绍了数字化射线照相技术对轻物质进行判断的方法。经实践证明，该方法是合理和有效的，可大大增强对轻物质的识别能力，是一种非常可行的识别技术。     

地球物理技术在我国考古和文物保护工作中的应用

20世纪80年代以来，我国考古及文物保护工作者和地球物理工作者越来越认识到地球物理技术在考古和方物保护方面可以发挥作用，在古幕探查、大型古建筑地下遗存现状、古遗迹断代等方面，地球物理技术都找到了发挥作用的机会，本文通过地球物理技术在云冈石窟、龙门石窟、克孜尔石窟、北京故宫紫禁城、嵩岳寺塔、古泗州城遗址、风阳明中都等的物理探查实例，以及查找古幕、古遗迹断代等方面的工作，介绍了我国在考古和文物保护领域应用地球物理技术的进展，并指出了物探在用于考古和文保时的特点和展望。     

结合农业科技园建设观光农园的探讨——以潮州鹤陇山农业科技园与观光农园的规划设计为例

广东省经济和旅游业发展位于全国榜首，人多地少全国最为突出，但乡村旅游建设相对滞后，文中通过潮州市郊鹤陇山农业科技园与观光农园规划设计，论述了发展高新技术农业是新世纪广东农业必由之路，提出结合农业科技园建设，叠加农业观光园，把生态农业建设与旅游文化结合起来，是广东乡村旅游发展的主要途径。     

洪水演进三维模拟仿真系统可视化研究

洪水演进仿真系统的研制，是实施“数字流域”工程的重要组成部分；结合洪水演进可视化目标的分析，基于Visual C 系统开发平台，融GIS技术和Opengl开发技术，采用三角形逼近、光滑处理和加入法向量以控制光照的方式，实现了流域地形及河床的三维可视化仿真；应用广度优先搜索算法确定了运动水体与流域河床形态的自适应与自相依的关系，使流域洪水演进模拟具有真实自然的可视化效果。所研制的系统雏形，可有效的模拟流域洪水的三维演进过程；