陆丰南地区断拗转换界面厘定及其地质意义

珠江口盆地经历裂陷阶段向拗陷阶段的转变，同期沉积地层记录了该构造变革和沉积演化过程，为厘定断拗转换界面提供了可能。基于地震反射、沉积旋回特征，识别出陆丰南地区恩平组内部存在全区可追踪对比的构造沉积转换面——T72界面，也是区分上下恩平组界面。对陆丰13洼洼间隆钻井LFA开展上下恩平组碎屑锆石U- Pb 定年、重矿物组分、元素分析，提出恩平组T72界面上下地层物源体系发生转变。结合区域沉积充填特征，表明陆丰南地区T72界面为断- 拗转换界面。具体表现为：下恩平组沉积期湖盆继承文昌期裂陷盆地特征，湖盆水体较深，物源主要为盆地内部的中生代基底凸起，沉积层序明显受盆内低凸起控制，在盆内低凸起四周发育一系列近源的辫状河三角洲，井区主要接受来自惠陆低凸起物源;上恩平组沉积期间，湖盆进入断拗过渡期，湖盆扩大、水体变浅，盆内低凸起四周的断裂活动减弱，沉积层序逐渐向盆内低凸起超覆，盆外太古宙—古生代物源组分供给不断加强，近源的三角洲砂体逐渐向远源的浅水三角洲砂体转化，同时发育宽广的滨浅湖环境，原供给物源的惠陆低凸起为水体淹没，井区接受了北部隆起外的物源。     

西安南郊丰水年秋季土壤水分研究

 通过对西安南郊丰水年秋季土壤含水量的测定，研究了地下0~6 m之间土壤含水量的变化与土壤干层的恢复问题。研究结果表明，丰水年西安南郊人工林下2~3 m的土壤含水量在20％左右，远远高于正常年份的土壤含水量，而且大于表层和深层的土壤含水量。分析得出，土壤干层发育较弱的地区在降水丰富的年份可以得到一定程度的恢复；西安地区基本适合进行人工造林；通过人工措施，增强降水入渗和土壤含水量，对树木成活和长期的生长应当具有明显的作用。     

New data on Sr-and C-isotopic chemostratigraphy of the Upper Riphean type section (Southern Urals)

New data on Sr-and C-isotopic systematics of carbonate rocks from the Upper Riphean stratotype (Karatau Group of the southern Urals) are obtained for several southwestern sections of the Bashkirian meganticlinorium, which have not been studied before. The results obtained supplement the Sr-and C-isotopic information for the group upper horizons thus detailing chemostratigraphic characterization of the entire succession. Limestone and dolostone samples used to analyze the Sr isotope composition satisfy strict geochemical criteria of the isotopic system retentivity and have been subjected to preliminary treatment in ammonium acetate to remove secondary carbonate phases. Data on 255 samples of carbonate rocks (171 studied for the first time) show that δ¹³C value varies in the Karatau Group succession from ?2.8 to +5.9 ‰ V-PDB with several in-phase excursions from the general trend in all the sections studied in the area 90 × 130 km. The δ¹³C variation trend demarcates several levels in the carbonate succession of the Karatau Group suitable for objectives of regional stratigraphy and for C-isotope chemostratigraphic subdivision of the Upper Riphean. The results of Sr isotopic analysis of 121 samples (51 unstudied before) from the Karatau Group imply that rocks in its lower part (the Katav Formation and basal horizon of the Inzer Formation) experienced considerable secondary alterations, while limestones and dolostones of the overlying interval of the group are frequently unaltered. In the “best” samples satisfying geochemical criteria of the isotopic system retentivity, the ⁸⁷Sr/⁸⁶Sr initial ratio increases from 0.70521–0.70532 in the lower Inzer deposits to 0.70611 in the upper Min’yar carbonates, decreasing to <0.70600 near the top of the latter. Above the regional hiatus separating the Min’yar and Uk formation, this ratio grows from 0.70533 to 0.70605–0.70609 in the limestone succession of the last formation.     

Modelling net erosion responses to enviroclimatic changes recorded upon multisecular timescales

Land use change has been recognized throughout the Earth as one of the most important factors influencing the occurrence of rainfall-driven geomorphological processes. However, relating the occurrence of historical soil erosion rates is difficult because of the lack of long-term research projects in river basins. Also, complex models are not adequate to reconstruct erosion rate changes because they require significant input data not always available on long timescales. Given the problems with assessing sediment yield using complex erosion models, the objective of this study is to explore a parsimonious scale-adapted erosion model (ADT) from the original Thornes and Douglas algorithms, which aims at reconstruction of annual net erosion (ANE) upon multisecular timescales. As a test site, the Calore River basin (3015 km² in southern Italy) provides a peculiar and unique opportunity for modelling erosion responses to climate and land cover changes, where input-data generation and interpretation results were also supported by documented hydrogeomorphological events that occurred before and after land deforestation. In this way, ANE_ADT-values were reconstructed for the period 1675–2004 by using precipitation indexes, complemented by recent instrumental records, and by using land cover statistics from documented agrarian sources. Pulses of natural sedimentation in the predeforestation period have been related to Vesuvius volcanic activity and changes in rainstorm frequency. After deforestation, the basin system became unstable with sudden fluctuations in the hydrogeomorphological regime contributing significantly to increased erosion and, in turn, sediment transport sequences via river drainage towards the Tyrrhenian coast.     

华南地区晚二叠和晚三叠世煤中稀土元素特征研究

在华南地区贵州六盘水、江西乐平、露庆和湖北黄石矿区晚二叠和晚三叠世煤层的稀土元素ICP—MS分析数据的基础上，系统研究了研究区煤中稀土元素的含萤分布特征、赋存特征、配分模式以及地质控制因素。含量分布表明晚二叠世稀土元素含量总体高于晚三叠世；煤中稀土元素与灰分成正相关关系，部分煤样品由于有富稀土元素的重矿物组合的存在而出现稀土元素的异常高值；同一矿区、同一时代煤中稀土元素的配分模式具有一定的相似性，而不同地区同一时代和同一地区不同时代煤中稀土元素的配分模式具有较大差异；煤的沉积环境，煤中无机矿物组成以及海水的影响是控制煤中稀土元素含量和配分模式的主要地质因素。     

深部找铀及湘南-桂北地区深部找铀潜景分析

概述了国内外深部找矿的研究成果,指出深部找矿是当今发展的趋势。国内外重大矿产的成功发掘,其深度均在千米以上,铀矿化垂向分布深度可达4 km以上。综合介绍了国内外勘查深大矿床的特点和条件,认为岩石-构造条件是深部矿化定位的重要因素,复式岩体、成矿系统的垂向变化、构造地球物理-地球化学异常模型是深部找矿的关键依据。综述了中国南方湘南—桂北地区深部找铀的有利地质构造条件和潜力,成矿流体是该区铀矿化的根源,白垩—第三纪重大地质事件是该区深部铀成矿的重要前提,重大地质事件引发的NE-NNE,NW向深大断裂及断陷盆地是铀矿化赋存的重要场所和勘查靶区。在已知铀矿田、成矿带勘查范围基础上,在该区进行深部探索将会获得重大突破。探讨了湘南—桂北地区深部找铀的勘查思路和方法。     

藏南地区金和锑矿床(点)类型及其时空分布特征

本文首次对藏南地区金和锑矿床(点)地质特征、成因类型和空间分布特点进行了总结，对金和锑成矿作用与中新生代构造一岩浆活动的关系进行了论证，对区域地壳演化过程中金和锑成矿动力学机制进行了讨论。该区的金和锑矿床(点)可按容矿围岩划分为：①变质岩为主要容矿围岩矿床(点)，包括金和金一锑矿床(点)；②沉积岩为主要容矿围岩矿床(点)，包括金、锑、金一锑和锑多金属矿床(点)；③火山岩为主要容矿围岩矿床(点)，以金一银矿床为代表。根据金和锑矿床(点)空间分布特点和地质特点，将本区划分为4个矿化集中区：拉昂错一马攸木一帕羊金矿化集中区(A)，然勒金和锑矿化集中区(B)，洛扎一措美锑矿化集中区(C)和邛多江金一锑矿化集中区(D)。各矿化集中区内大多数金和锑矿床(点)与燕山晚期～喜马拉雅早期富碱火成岩具密切时空分布关系，它们是古板块对接碰撞期和碰撞期后大规模构造一岩浆活动的产物。近东西向挤压性和南北向张性断裂交汇部位以及富碱火成岩发育区是寻找金和锑矿床(点)的有利场所。     

裂缝性岩石裂缝扩展的光弹构造物理模拟——以南华北盆地户部寨沙河阶组为例

以南华北盆地户部寨第三系沙河阶组粉砂岩低渗透储层为例,总结了其中发育的5种类型构造裂缝组合,即:①南北向雁形张节理组成的共轭剪节理带;②东西向雁形张节理组成的共轭剪节理带;③缠结状多组剪切构造裂缝;④组合状交切的多组剪切构造裂缝及张裂缝;⑤散状无序排列的构造裂缝。在此基础上,建立光弹性试验构造物理模型,沿现应力场96°方向,均匀地对该模型逐步增加外载力。结果表明,沿各组合裂缝尖端分别形成对称于裂缝走向、且主轴垂直于裂缝的Ⅰ型等色线条纹;对称于裂缝走向、且主轴平行于裂缝走向的Ⅱ型条纹和斜交于裂缝走向的复合型(Ⅲ型)条纹。第①类组合裂缝尖端以Ⅰ型等色线条纹的拉张应力和张剪应力为主;第②类组合裂缝尖端以复合型(Ⅲ型)等色线条纹的挤压应力为主;第③、④和⑤类组合裂缝尖端的应力分布较为复杂。当模型外载荷接近1000kg时,裂缝尖端起裂,并开始发育显微裂缝,而当外载荷达1100-1200 kg时,沿裂缝尖端部位形成宏观裂缝,并开始扩展。5种类型的裂缝组合扩展发育程度由强至弱依次为:①,③,⑤,②,④。其中第①类共轭裂缝组合起裂最早,扩展最快,裂缝间的连通趋势最好,说明规则分布的构造裂缝组合,在垂直于外施加载衙时更易达到连通的目的。     

Constraints on the application of carbon isotope thermometry in high- to ultrahigh-temperature metamorphic terranes

Nine marble horizons from the granulite facies terrane of southern India were examined in detail for stable carbon and oxygen isotopes in calcite and carbon isotopes in graphite. The marbles in Trivandrum Block show coupled lowering of δ¹³C and δ¹⁸O values in calcite and heterogeneous single crystal δ¹³C values (? 1 to ? 10‰) for graphite indicating varying carbon isotope fractionation between calcite and graphite, despite the granulite facies regional metamorphic conditions. The stable isotope patterns suggest alteration of δ¹³C and δ¹⁸O values in marbles by infiltration of low δ¹³C–δ¹⁸O‐bearing fluids, the extent of alteration being a direct function of the fluid‐rock ratio. The carbon isotope zonation preserved in graphite suggests that the graphite crystals precipitated/recrystallized in the presence of an externally derived CO₂‐rich fluid, and that the infiltration had occurred under high temperature and low f_O2 conditions during metamorphism. The onset of graphite precipitation resulted in a depletion of the carbon isotope values of the remaining fluid+calcite carbon reservoir, following a Rayleigh‐type distillation process within fluid‐rich pockets/pathways in marbles resulting in the observed zonation. The results suggest that calcite–graphite thermometry cannot be applied in marbles that are affected by external carbonic fluid infiltration. However, marble horizons in the Madurai Block, where the effect of fluid infiltration is not detected, record clear imprints of ultrahigh temperature metamorphism (800–1000 °C), with fractionations reaching <2‰. Zonation studies on graphite show a nominal rimward lowering δ¹³C on the order of 1 to 2‰. The zonation carries the imprint of fluid deficient/absent UHT metamorphism. Commonly, calculated core temperatures are > 1000 °C and would be consistent with UHT metamorphism.