Elastic fields in two joined transversely isotropic media of infinite extent as a result of rectangular loading

This paper presents the closed‐form solutions for the elastic fields in two bonded rocks induced by rectangular loadings. Each of the two bonded rocks behaves as a transversely isotropic linear elastic solid of semi‐infinite extent. They are completely bonded together at a horizontal surface. The rectangular loadings are body forces along either vertical or horizontal directions and are uniformly applied on a rectangular area. The rectangular area is embedded in the two bonded rocks and is parallel to the horizontal interface. The classical integral transforms are used in the solution formulation, and the elastic solutions are expressed in the forms of elementary harmonic functions for the rectangular loadings. The stresses and displacements in the rocks induced by both the horizontal and vertical body forces are also presented. The numerical results illustrate the important effect of the anisotropic bimaterial properties on the stress and displacement fields. The solutions can be easily implemented for numerical calculations and applied to problems encountered in rock mechanics and engineering. Copyright © 2011 John Wiley & Sons, Ltd.     

A comparison of fibre‐optic distributed temperature sensing to traditional methods of evaluating groundwater inflow to streams

There are several methods for determining the spatial distribution and magnitude of groundwater inputs to streams. We compared the results of conventional methods [dye dilution gauging, acoustic Doppler velocimeter (ADV) differential gauging, and geochemical end‐member mixing] to distributed temperature sensing (DTS) using a fibre‐optic cable installed along 900 m of Ninemile Creek in Syracuse, New York, USA, during low‐flow conditions (discharge of 1·4 m³ s^?1). With the exception of differential gauging, all methods identified a focused, contaminated groundwater inflow and produced similar groundwater discharge estimates for that point, with a mean of 66·8 l s^?1 between all methods although the precision of these estimates varied. ADV discharge measurement accuracy was reduced by non‐ideal conditions and failed to identify, much less quantify, the modest groundwater input, which was only 5% of total stream flow. These results indicate ambient tracers, such as heat and geochemical mixing, can yield spatially and quantitatively refined estimates of relatively modest groundwater inflow even in large rivers. DTS heat tracing, in particular, provided the finest spatial characterization of groundwater inflow, and may be more universally applicable than geochemical methods, for which a distinct and consistent groundwater end member may be more difficult to identify. Copyright © 2011 John Wiley & Sons, Ltd.     

关于精密地形改正的若干注记

引用斜率作为新的变量，首次使地形改正一类奇异积分非奇异，并在此基础上详细讨论了精密地形改正计算的若干技术问题，地形模型和某山区的试算结果均表明，以往线性近似误差较大，应避免使用。     

数字地图图像的形态分解与表示

本文论述了目标图像的形态分解、形态分布函数和形态谱函数的基本概念和具体算法，它们是研究数字地图图像的形态分解与表示的主要内容。     

利用地层空间的相对稳定性、井资料、地震资料模拟高分辨率波阻抗资料

由于地震资料是带限的,而井资料约束反演过程中的地震反演频带的展宽也是有一定限度的,使得反演地震波阻抗也是带限的。如何进一步拓宽反演地震波阻抗的频带宽度,提高地震资料的分辨率是文中研究的内容。利用井约束下的地震反演波阻抗资料、地震资料及井资料,借鉴地质模拟技术,研究如何利用地层的空间相对稳定性特征,通过相关函数的分析,估计反演更高分辨率的地震波阻抗资料。考虑到地质体空间的相关性及分辨率,相关半径取相关函数从最大点到第1个极值点的范围。在目标函数的计算过程中,既考虑当前计算点的权系数信息,又考虑井外推时的权系数信息,这样使计算结果更加稳定可靠。通过综合模拟计算,能够识别较小砂体     

基于R树的分布式并行空间索引机制研究

为提高分布式并行计算环境下海量空间数据管理与并行化处理的效率,基于并行空间索引机制的研究,设计一种多层并行R树空间索引结构。该索引结构以高效率的并行空间数据划分策略为基础,以经典的并行计算方法论为依据,使其结构设计在保证能够获得较好的负载平衡性能的前提下,更适合于海量空间数据的并行化处理。以空间范围查询并行处理的系统响应时间为性能评估指标,通过实验证明并行空间索引结构具有设计合理、性能高效的特点。     

Evaluation of the SEDD model for predicting sediment yield at the Sicilian experimental SPA2 basin

In this paper a spatially distributed model of the hillslope sediment delivery processes, named the sediment delivery distributed (SEDD) model, is initially reviewed; the model takes into account the sediment delivery processes due to both the hillslope sediment transport and the effects of slope curvature. Then the rainfall and sediment yield events measured at the experimental SPA2 basin, in Sicily, are used both to calibrate the SEDD model and to verify the predictive capability of the distributed sediment delivery approach at event scale. For the SPA2 basin discretized into morphological units and stream tubes, the SEDD model is calibrated at event scale using the measurements carried out at the outlet of the experimental basin in the period December 2000–January 2001. The model calibration is used to determine a relationship useful for estimating the unique coefficient β_e of the model by rainfall erosivity factor R_e at event scale. To test the predictive capability of the β_e = f(R_e) relationship, 20 events measured in the period September 2002–December 2005 are used; the comparison between measured sediment yield values and calculated ones for all monitored events shows that the sediment delivery distributed approach has a good predictive ability at event scale. The analysis also shows that estimating β_e by the relationship β_e = f(R_e) gives a better agreement between measured and calculated sediment yields than obtained with the median value β_e,m of all 27 calculated β_e values. Finally the analysis at annual scale, for the period 2000–2005, allows the estimation of the median value β_a,m representative of the annual behaviour. This analysis shows that the sediment delivery distributed approach also has a good predictive ability at annual scale. Copyright © 2006 John Wiley & Sons, Ltd.     

A non‐baseline algorithm for damage locating in flexural structures using dynamic distributed macro‐strain responses

The concept of distributed strain‐sensing techniques has been proposed in our recent research, which was dedicated to utilizing the strain distributions throughout the full or partial areas of structures to detect arbitrary and unforeseen damage. An algorithm not requiring a detailed analytical model is presented for damage locating in flexural structures through the direct use of dynamic responses recorded by distributed long‐gauge strain sensors. The modal macro‐strain vector (MMSV), which has been proven to have a mapping relation with displacement mode shape, can be extracted directly from macro‐strain time‐series data, from which a damage evaluating index can be derived and used as an indicator for locating damage. Numerical examples are simulated to verify the sensitivity and effectiveness of the index in different cases. Furthermore, experimental investigations on a cantilevered beam with various long‐gauge fibre optic sensors placements are carried out to examine the feasibility and applicability of the proposed method. Copyright © 2007 John Wiley & Sons, Ltd.     

ASP应用中COM组件开发方法研究

从ASP技术与COM技术出发，针对MCU远程控制应用的多层分布体系结构特点及应用要求，详细论述了如何进行组件线程类型选择、接口设计、物理定位开发与实现具有特定功能的COM组件并如何在ASP应用中创建和扫行，以实现远程控制MCU功能。论述了在设计与实现COM组件过程中，其安全性与作用域的选择。     

若干交代成岩成矿作用组份质量转移的计算与分析

本以几种常见的交代成岩成矿作用为例，介绍了一种新的综合性的组份质量转移计算法－真恒量定值非固定同体积质量计算法（TCFM法），并根据计算结果对这些成岩，成岩作用的形成条件进行了分析。