Estimating the seismic displacement of friction pendulum isolators based on non‐linear response history analysis

A procedure for developing equations that estimate the isolator displacement due to strong ground motion is applied to buildings isolated with the friction pendulum system. The resulting design equations, based on rigorous non‐linear analysis, offer an alternative to the iterative equivalent‐linear methods used by current U.S. building codes. The governing equations of the system are reduced to a form such that the median normalized displacement of the system due to an ensemble of ground motions is found to depend on only the isolation period—a function of the curvature of the isolator—and the friction force at incipient slip normalized by peak ground velocity. The normalization is effective in minimizing the dispersion of the normalized displacement for an ensemble of ground motions, implying that the median normalized displacement is a reliable estimate of response. The design equations reflect the significant (20 to 38%) increase in displacement when the excitation includes two lateral components of ground motion instead of just one component. Equivalent‐linear methods are shown to underestimate by up to 30% the exact median displacement determined by non‐linear response history analysis for one component of ground motion, and building codes include at most a 4.4% increase for a second component. Copyright © 2003 John Wiley & Sons, Ltd.     

Approximate modal decomposition of inelastic dynamic responses of wall buildings

Two approximate methods for decomposing complicated inelastic dynamic responses of wall buildings into simple modal responses are presented. Both methods are based on the equivalent linear concept, where a non‐linear structure is represented by a set of equivalent linear models. One linear model is used for representing only one vibration mode of the non‐linear structure, and its equivalent linear parameters are identified from the inelastic response time histories by using a numerical optimizer. Several theoretical relations essential for the modal decomposition are derived under the framework of complex modal analysis. Various numerical examinations have been carried out to check the validity of the proposed modal decomposition methods, and the results are quite satisfactory in all cases. Fluctuating bending moment and shear at any location along the wall height contributed by each individual vibration mode can be obtained. Modal contributions to shear and flexural strength demands, as well as the corresponding modal properties, under various seismic loading conditions can also be identified and examined in detail. Furthermore, the effects of higher vibration modes on seismic demands of wall buildings are investigated by using the modal decomposition methods. Several new insights into the complicated inelastic dynamics of multi‐story wall buildings are presented. Copyright © 2004 John Wiley & Sons, Ltd.     

"渗流-管流耦合模型"的物理模拟及其数值模拟

井孔 -含水系统问题是当今水文地质学最重要的研究课题之一。长期以来 ,水文地质模型中对井孔的刻画基本上都是引用“热传导”中的“线汇”理论 ,需要人工预先给定线汇 线源的流量或水头的分配 ,其正确性或适用性至今没有得到理论证明。陈崇希 (1993 )提出的“渗流 -管流耦合模型”和“等效渗透系数”在理论上已解决多个水文地质问题 ,也用于几个实例 ,本文再用物理模拟检验其可靠性。论文针对具有典型意义的河床下水平井或傍河垂直井地下水流问题做了砂槽物理模拟 ,并用基于“渗流 -管流耦合模型”和“等效渗透系数”的数值方法仿真模拟了此条件下地下水流的规律。成果表明 ,数值模拟观测孔水头动态相当好地再现了物理模拟结果。论文指出了“渗流 -管流耦合模型”和“等效渗透系数”在井孔 -含水系统问题上的广泛应用前景。     

Exploration of remotely sensed forest structure and ultrasonic range sensor metrics to improve empirical snow models

Current methods to estimate snow accumulation and ablation at the plot and watershed levels can be improved as new technologies offer alternative approaches to more accurately monitor snow dynamics and their drivers. Here we conduct a meta‐analysis of snow and vegetation data collected in British Columbia to explore the relationships between a wide range of forest structure variables – obtained from Light Detection and Ranging (LiDAR), hemispherical photography (HP) and Landsat Thematic Mapper – and several indicators of snow accumulation and ablation estimated from manual snow surveys and ultrasonic range sensors. By merging and standardizing all the ground plot information available in the study area, we demonstrate how LiDAR‐derived forest cover above 0.5 m was the variable explaining the highest percentage of absolute peak snow water equivalent (SWE) (33%), while HP‐derived leaf area index and gap fraction (45° angle of view) were the best potential predictors of snow ablation rate (explaining 57% of variance). This study reveals how continuous SWE data from ultrasonic sensors are fundamental to obtain statistically significant relationships between snow indicators and structural metrics by increasing mean r² by 20% when compared to manual surveys. The relationships between vegetation and spectral indices from Landsat and snow indicators, not explored before, were almost as high as those shown by LiDAR or HP and thus point towards a new line of research with important practical implications. While the use of different data sources from two snow seasons prevented us from developing models with predictive capacity, a large sample size helped to identify outliers that weakened the relationships and suggest improvements for future research. A concise overview of the limitations of this and previous studies is provided along with propositions to consistently improve experimental designs to take advantage of remote sensing technologies, and better represent spatial and temporal variations of snow. Copyright © 2013 John Wiley & Sons, Ltd.     

Numerical modeling investigation on turbulent oscillatory flow over a plane rough bed composed by randomly arrayed particles

A three-dimensional numerical model is established to simulate the turbulent oscillatory boundary layer over a fixed and rough bed composed by randomly arrayed solid spheres based on the lattice Boltzmann method and the large eddy simulation model.The equivalent roughness height,the location of the theoretical bed and the time variation of the friction velocity are investigated using the log-fit method.The time series of turbulent intensity and Reynolds stress are also investigated.The equivalent roughness height of cases with Reynolds numbers of 1×10~4–6×10~4 is approximately 2.81 d(grain size).The time variation of the friction velocity in an oscillatory cycle exhibits sinusoidal-like behavior.The friction factor depends on the relative roughness in the rough turbulent regime,and the pattern of solid particles arrayed as the rough bed in the numerical simulations has no obvious effect on the friction factor.     

厚碳酸盐岩覆盖区RVSP三维地震勘探应用效果分析

该文以中国南方一厚碳酸盐岩覆盖区的RVSP三维地震勘探实例,对RVSP三维地震勘探观测系统和数据采集参数的确定、地面等效处理和波场分离等关键处理技术及地质效果进行了阐述和分析,说明了RVSP在克服表浅层复杂地质条件及环境条件对资料的影响及提高地震资料的分辨率有其特定的优势,同时也提出了RVSP三维地震在采集和处理过程中的难点。     

基于等价权抗差估计和线性规划的天线曲面拟合算法

现有天线曲面拟合算法均基于最小二乘法,难以消除多个粗差对拟合结果的影响。本文基于等价权抗差估计思想,利用线性规划计算残差初值,再进行选权迭代计算。通过算例,证明本文方法能较好地探查多个粗差,且计算结果精度更高。     

SAR图像海岸线检测的区域距离正则化几何主动轮廓模型

合成孔径雷达(SAR)卫星遥感图像可以极大地提高全国海岸线覆盖频率,然而受到海洋波浪所引起的随机海水表面粗糙度的影响,海岸目标与海水背景边界易混淆不清,因此本文提出了基于区域距离正则化几何主动轮廓模型(RDRGAC),引入距离正则项,解决重复初始化水平集函数为符号距离函数的问题,提高了算法收敛速度。此外,将区域面积项系数与SAR图像等效视数(ENL)建立非线性拟合关系,实现RDRGAC模型根据不同SAR遥感图像的自适应调整,改善海岸线自动提取精度。通过河北省北戴河和大连市金州湾SAR数据海岸线提取对比试验,验证了所提方法的有效性。     

抗差估计的多波束测深数据内插方法

针对传统多波束测深数据网格化内插方法抗差性不足的问题,该文将抗差估计理论应用于网格化内插方法中。基于不确定度指标建立了距离不确定度联合加权内插模型,在该模型的权函数中引入了等价权,同时给出了等价权设计方案及迭代初值确定原则,以增强模型的抗差性;介绍了一种节点邻域参考点合理选取方法,给出了改进内插法实现的基本步骤,最后通过实测数据对反距离加权法、联合加权法及改进方法内插水深质量进行比较。结果表明,改进方法内插结果要优于另外两种方法,可应用于多波束测深数据网格化处理中。     

基于人工鱼群算法和SCA等效理论的井中横波速度预测方法

在建立页岩岩石物理模型的基础上,根据等效自相容近似(SCA)岩石物理模型,构建出岩石的纵波速度、横波速度与岩石密度、组分和孔隙度等的定量关系,得出使理论纵波速度和实际纵波速度最接近的孔隙纵横比,进而将该孔隙纵横比作为约束条件来实现横波速度预测。反演算法利用人工鱼群算法来计算最佳孔隙纵横比,并将预测的横波速度与实际测得的横波速度对比,证明了人工鱼群算法的有效性。