Simulation by Slepian method of plastic displacements of Gaussian process excited multistory shear frame

The object of study is a stationary Gaussian white noise excited multi-degree-of-freedom (MDOF) linear elastic, ideal plastic, linearly damped, statically determinate oscillator with several potential elements of ideal plastic yielding. Specifically the study is exemplified for a plane multistory shear frame with rigid traverses where all the connecting columns except the columns in one or more of the bottom floors have finite symmetrical yield limits. The white noise excitation acts on the mass of the first floor making the movement of the elastic bottom floors simulate a ground motion that interacts with the structure above the bottom floors. The method of study is so-called Slepian model simulation and is in principle the same for other statically determinate MDOF elasto-plastic oscillators of the considered type. The method is fast as compared to direct simulation and provides results that give good insight in the behavior of the plastic displacement response process.     

Further evidence of responsibility of impurities in MgO for variability in its basicity and catalytic performance in oxidative coupling of methane

Further evidence was delivered that certain impurities, which could be contained in MgO samples, might be responsible for observed variability in MgO basicity and catalytic performance in oxidative coupling of methane. The surface basicity/base strength distribution of a series of MgO samples containing or not containing Ca and Na impurities was determined by a temperature-programmed desorption of CO₂. It was revealed that samples containing Ca and Na impurities have much more medium, strong and very strong basic sites. The surface basicity of MgO samples containing added alkali or alkaline earth compounds or water was characterized by a test reaction of transformation of 2-butanol. It was confirmed that the introduction of these compounds to a pure MgO enhanced both its basicity and activity in oxidative coupling of methane.     

甲醛与甲酸甲酯的偶联反应 Ⅰ.杂多酸的催化作用

研究了４种杂多酸（磷钨酸、硅钨酸、磷钼酸和硅钼酸）对甲醛和甲酸甲酯偶联反应的催化作用；对反应条件进行了考察。结果表明，磷钨酸和硅钨酸对该反应具有较高的催化活性；而氧化性强的钼系杂多酸的活性较低。水对甲醛和甲酸甲酯的偶联反应具有不利影响。将杂多酸在３００℃进行热处理后，其活性显著增强。     

油,水二相流固耦合渗流的数学模型

为了正确模拟油藏中流体流动的动态过程，必须考虑由于注水和开采而引起的多相流体的流动、应力状态的变化和储集层变形之间复杂的相互作用。但由于这种问题的控制方程是三维非线性耦合方程，因此，很难模拟这种耦合作用。利用广义的Ｂｉｏｔ理论建立了一个完全耦合的数学模型，它描述可变形油藏中岩石变形和油水流动的这种相互作用。模型中假设岩石骨架具有弹塑性特性，流体是可压缩的。以岩石骨架位移和油水压力为未知变量所建立的控制方程，包括岩石骨架的平衡方程和流体（油、水）的连续性方程。所建立的流固耦合模型在石油工程，特别是在油藏数值模拟中有广泛的应用。参８（陈志宏摘     

Effect of the method of preparation of a Nd2O3-MgO catalyst on its efficiency in the reaction of oxidative coupling of methane

It is shown that the decomposition of a mixture of nitrates or coprecipitated carbonates or hydroxides of Mg and Nd form catalysts manifesting similar catalytic properties, while the catalyst obtained by impregnation is more active but much less selective. The mechanism of formation of the catalytically active phase and the nature of the active sites are discussed.     

液力偶合器在电动煤气鼓风机系统的应用

煤气鼓风机为适应系统煤气量的变化采用改变风机的转速来进行调节是一有效的节能方法。本文介绍了液力偶合器的结构特点、工作原理及其在煤气鼓风机系统中的应用，以实现风机的调速，并取得了明显的节能效果。     

正交矩形波导复合耦合槽特性分析

两个正交矩形波导公共宽边上偏离中心线的耦合斜槽称为复合耦合槽。考虑波导壁的厚度，根据等效原理和缝隙口面切向磁场的连续条件建立一对耦合积分方程，利用矩量法进行求解，给出复合耦合槽的谐振长度、散射参量随缝隙的倾角、偏离波导中心线距离的关系曲线     

Effect of structural period and ground motion parameters on the earthquake response of asymmetric buildings

The results of a parametric study of torsional coupling effects in the response of asymmetric buildings to a grouped selection of 45 strong motion earthquakes from Europe, North America, the Middle East and Southern Pacific are presented. The period dependency of the key response parameters is studied in relation to the site dependent criteria employed by certain earthquake-resistant design codes for specifying the lateral shear forces to be resisted by the structural frames and/or walls. Unlike lateral forces, the torsional response is relatively insensitive to the ration of peak ground accelaration to velocity, which has been used in previous studies as a measure of the effect on earthquake ground motions of site soil conditions and epicentral distance. The results show that the effect of torsional coupling on edge displacement response is more pronounced in stiff, short period structures. However, the dynamic shear and torque responses are relatively insensitive to variations in structural period. Codified design provisions for torsional effects specified in the United States, Canadian and European seismic building regulations are assessed, along with alternative proposals, in relation to the analytical results. It is concluded that in some cases special provisions are needed for short period asymmetric systems, a feature which has been neglected by the codes and inadequately accounted for in previous proposals.     

通用菜单系统—UMS

下拉菜单作为应用软件系统的用户界面已成为一种趋势。本文提供一种可以在UNIX和DOS操作系统环境下运行的通用菜单系统UMS（Universal Menu System)。文中对UMS中菜单的数据结构、菜单的用户描述、菜单系统程序的自动生成、菜单的初始化、菜单的实现技术和操作以及应用软件的耦合等技术问题都进行了详细的讨论。同时也指出了软件存在的问题。     

Interfacial Dipoles and Radiated Energy

Electric dipoles radiate an electromagnetic field into their surroundings. The electric and magnetic fields from a point source or from linear dipoles have components parallel to a spherical surface but also a radial component. In most investigations on radiated fields, only the part of the electric field that is parallel to a spherical surface is taken into account. The argument is that only that component contributes to the radiated energy. Here we show that the phase front in the lower half space is not a spherical surface and hence, the radial components contribute to radiated energy. We show differences in radiation patterns for point electric dipoles and linear dipoles, either modeled as perfectly conducting wires or as resistively loaded wires. Our primary interest lies with improving image resolution through processing of Ground-Penetrating Radar data. Here the emphasis lies with understanding the radiation characteristics of linear dipoles that can be incorporated with image processing algorithms. The model uses a thin-wire approximation for the transmitter antenna. The solution to the discrete system of equations is solved, incorporating interaction between the interface, using a CGFFT scheme including symmetrization and a newly developed preconditioning operator. We look at the electric and magnetic fields as well as the time-averaged Poynting vector radiation patterns in the E-plane and H-plane of the transmitting antenna. The results show that the radial component of the radiated electric and magnetic field is not negligible, even at distances more than seven wavelengths away from the antennas.