消失模铸造模成型机的特点及应用

介绍了消失模铸造工艺对成型机的特殊要求,高性能成型机在大规模工业化消失模生产中的重要性,重点阐述了德国Teubert公司TVY130/90消失模成型机的特点及应用,并对成型机的国产化研究与开发提出了建议。     

平面药包抛掷爆破的漏斗特征解析

根据惠州港通用码头陆域平面药包抛掷爆破的实爆堆积测量分析成果 ,结合药包设计的主要参数 ,对平面药包产生的爆破漏斗的范围与形态、不同药包部位的残方比与抛掷率、药包的长抗比与圆柱体药包的应力波形演变关系予以解析 ,供硐室爆破的理论研究、模拟试验和总结条形药包特性时参考     

广西某矿区托帕石的宝石学特征

广西某矿区的脉石矿物——黄玉分三个世代,其中第三世代的黄玉晶体无色透明,重量大于0.9克拉,瑕疵不明显,密度(3.50)、硬度(7.8430)和折射率(1.6330)等特征均达宝石级,经系统研究测试,可以命名为托帕石(Topaz)。     

锥形凸台成形的一种叠加滑移线场力学模型

分析了锥形凸台在不同体积成形工艺中的成形机理，基于模块化思想将锥形凸台的成形过程划分为挤压成形与角部充满两个特征时段；将上述两个特征时段的滑移线场力学模型有机联结，构建了锥形凸台成形过程的一种叠加滑移线场力学模型；介绍了叠加滑移线场力学模型的应力场与变形力的求解方法。该模型丰富了金属体积成形过程的特征单元库，可套用于局部成形的应力场与变形力求解，实现局部成形的模具优化设计。     

断裂带中层天然气成藏特征--以济阳坳陷东营北部断裂带为例

文章分析了东营北部断裂带中层天然气藏的气体性质、储盖组合类型、温压环境对中层气成藏的影响以及断裂活动对中层气成藏的制约；剖析了三角洲沉积体系在中层天然气成藏中的纽带作用，建立了断裂带中层天然气运聚模式、成藏模式；总结出了中层天然气藏横向分布特征及纵向成藏序列，对于富油盆地断裂带天然气勘探具有很好的指导意义。     

氧化锌颗粒膜电阻响应-恢复特性研究

测试了氧化锌颗粒膜电阻响应-恢复特性，讨论了颗粒形态，加热电压、环境气氛、气氛浓度和注入方式等因素对电阻响应-恢复特性的影响。结果表明，随着加热电压的升高，电阻响应-恢复的速度和程度明显加大；断续注入时颗粒膜电阻值的响应随着浓度的增加逐步减弱．     

Cost effectiveness of decentralized energy supply systems taking solar and wind utilization plants into account

In this article, results are presented of annual simulations of a decentralized (regional) plant for the power and heat supply of a residential complex. This complex consists of four houses with 40 flats all in all. The annual power consumption of the complex is 157 MWh and the heat requirement is 325 MWh. The concrete dynamics of the energy demands over the year is taken into consideration. The energy supply system is composed of a power-controlled combined heat and power (CHP) plant (55 kW), a photovoltaic plant (PV array or PV plant) array for power generation as well as a field of solar thermal collectors with a short-term accumulator for water heating and a long-term accumulator for supplying heat for domestic heating purposes. Simulation results demonstrate that synergetic effects result from the combination of a CHP plant with wind power and PV plants of varying sizes, which have an effect on the cost effectiveness of the plant as a whole with the different dynamics of energy sources (wind and solar energies) and of the consumption of power and heat being the decisive factors. The power deficits of wind power and PV plants are compensated through the application of a natural gas-operated CHP plant. In almost all variants, the demand for fossil energy carriers is distinctly less than in conventional energy supply plants.     

油煤浆的管道输送特性与管路设计原则

通过理论分析和管道实验，探讨了油煤浆在工业管道输送中的流变特性、流动状态和阻力特性，得出了油煤浆的物性参数、表观参数、管道阻力参数的测定值和计算公式，并在此基础上探讨了油煤浆管道输送的设计原则，为油煤浆管路的设计提供基础数据、计算方法和一般原则。     

基于网点形状与平版印刷关系的研究

通过研究网点的作用和基本参数，以及网点形状与平版印刷的关系，对比了2种常用网点形状（正方形网点和圆形网点）的印刷特性，从而说明不同的网点形状会产生不同的复制效果。     

Characteristic Investigation of Nano-Crystal Hydrogen Storage Alloys

A Ml (NiCoMnA1)5 hydrogen storage alloys was prepared by double-roller rapid quenching.Its microstructure, electrochemically and kinetic characteristic were studied.A uniform crystal phase with CaCu5 structure could be detected by XRD analyses, whose average grain size is 30 ～ 50 nm and the ratio of c/a of nano-crystal hydrogen storage alloy is larger.The hydrogen absorption/desertion p - C isotherms of alloy show that its fiat-performance is perfect and the magnetic stagnant effect is very little.An simulate cell is used for electrochemical measurement.Electrode is 10C, the capacity decreasing rate via the 450 cycles at 7C is less than 20%.