K0.9Li0.1（Ta0.5Nb0.5）O3晶体压电应变系数的测量

用准静态ｄ＿（３３）测量仪和干涉法相结合。测量了Ｋ＿（０．９）Ｌｉ＿（０．１）（Ｔａ＿（０．５）Ｎｂ＿（０．５）Ｎｂ＿（０．５））Ｏ＿３晶体的压电应变系数。结果为：ｄ＿（３３）＝８６．０，ｄ＿（３３）＝一２９．５，ｄ＿（１５）＝１１２．９×１０￣（－１２）Ｃ／Ｎ．     

准噶尔盆地边缘山区的初步静校正

本文讨论了准噶尔盆地边缘山区替代速度对初步静校正精度的影响。通过用相遇法[1]从多次覆盖反射地震采集记录中的初至折射波计算基岩面的t0时和选用合适的替代速度进行初步静校正，在很大程度上消除了表层不均匀和基岩面起伏引起的大静校量，使静校误差控制在自动静校的要求范围之内、从而提高了速度谱和水平叠加剖面的质量。     

亚稳态金属材料抗空蚀性能研究

用旋转圆盘实验机研究了三种金属材料的空蚀。试验结果表明 :Fe -Mn -Si形状记忆合金、Fe -Cr-Ni-Mn不锈钢空蚀中分别诱发产生密排六方晶体结构的马氏体和体心立方晶体结构的马氏体 ,其抗空蚀性能依次为 0Cr13Ni5Mo不锈钢的 7.3倍和 2 .1倍。亚稳态金属材料抗空蚀性能与空蚀过程中动态相变对应力的响应密切相关。空蚀诱发马氏体相变不仅有利于改善材料抗空蚀性能 ,而且马氏体相变及其逆转变引起的能量耗散和伪弹性大大提高了Fe-Mn -Si铁基形状记忆合金的抗空蚀性能     

Carnot comparison of multi-temperature level absorption heat cycles

Comparison of different absorption heat cycles is not always made on the correct manner. This also includes comparison of an ideal absorption cycle with a mechanical analogy. A new Carnot model operating with two heat engines and two mechanical heat pumps is defined to be the correct and logical way to describe the mechanical analogy for an absorption heat pump and an absorption heat transformer. General equations for the Carnot coefficient of performance, COP_r, are exemplified and simulated for an absorption heat pump and an absorption heat transformer, and an entropy flow fraction diagram is introduced. The important fact that the absorption heat cycles must operate under the same conditions when they are compared is discussed.     

The thermodynamic performance of a new solution cycle in double absorption heat transformer using water/lithium bromide as the working fluids

In this paper, a new solution cycle in the double absorption heat transformer is presented and the thermodynamic performance of this new cycle is simulated based on the thermodynamic properties of aqueous solution of lithium bromide. The results show that this new cycle is superior to the cycle being studied by some researchers. This new solution cycle has a wider range of operation in which the system maintains the high value of COP and has larger temperature lifts and operation stability. The relationship between the absorber and the absorbing evaporator is more independent and this makes the operation and control of the system more easier.     

水泥基压电复合材料的制备及极化工艺研究

采用压制成型法，首次以快硬早强的硫铝酸盐水泥为基体制备了水泥基压电复合材料。详细阐述了水泥基压电复合材料的制备过程；通过实验确定了适宜的极化条件，分析讨论了极化过程中出现漏电流的原因，并提出了一些初步的解决途径。结果表明，对硫铝酸盐水泥基压电复合材料来说，适宜的极化工艺参数：极化电场强度为4kV／mm，极化时间为45min，极化温度应低于130℃。     

OpenType字体技术

OpenType字体技术是Type字体和TrueType字体“大战”的产物，也是响应Unicode字符编码标准的产物，更是Adobe与Microsoft公司合作的产物。单从时间概念上考虑，这种字体技术其实并不新，现在重提OpenType字体，是因为CS2套件对于OpenType字体的全面支持，以及OpenType字体具有许多最要的特征。     

Calculation methods for comparing the performance of pure and mixed working fluids in heat pump applications

Three methods for comparing cycle performance of working fluids, pure as well as non-azeotropic mixtures, are investigated for two applications and for two mixture pairs, HCFC22-CFC114 and HCFC22-HCFC142b, and their pure components. The methods differ in the way of calculating the heat exchange processes. They assume, respectively, equal minimum approach temperatures, equal mean temperature differences and equal heat transfer areas. Changes of coefficient of performance (COP) with composition are explained for all methods. It is shown that transport properties must be taken into account when making rigorous comparisons between working fluids. To predict the relations between fluids with high accuracy, one must use the method with equal heat transfer areas. By the method with equal mean temperature differences, the COP can be estimated with the same accuracy for mixtures as for pure fluids, and can be used for rough estimations of the COP level with different fluids. The method of equal minimum approach temperatures should be avoided for non-azeotropic mixtures.     

Effet de la pression sur la transition ruisselant-pulsé dans les réacteurs catalytiques à lit fixe arrosé

The effect of pressure on transition displacement between trickle and pulsed regimes (TPR: trickle-pulsed transition) in catalytic trickle bed reactors (CTBR) is not properly predicted by existing theoretical models and empirical correlations. Based on high pressure TPR data available to date, a modified Charpentier diagram is proposed to quantify directly the effect of pressure in non-foaming systems.     

有机硅聚脲润滑脂的合成

本文报导一种新型润滑脂－ＨＺ－９２０８有机硅聚脲润滑脂的合成、分析了测试数据及应用效果，并就有关问题作了简要讨论。