N-三甲基壳聚糖对促进阿昔洛韦滴眼液眼部滞留性的体内外考察

目的对不同季铵化程度(DQ)的N-三甲基壳聚糖(TMC)促进阿昔洛韦(ACV)滴眼液眼部滞留性进行考察。方法将浓度为0.5%,DQ分别为20%、40%及60%的TMC(TMC20,TMC40,TMC60)加入ACV滴眼液中;以同浓度壳聚糖(CS)ACV滴眼液为阳性对照,以普通ACV滴眼液为阴性对照,选用家兔为实验动物,采用悬挂泡技术和束缚泡技术进行离体眼球表面接触角及解吸附动力学进行研究,同时在各种ACV滴眼液中分别加入0.05%的荧光素钠为示踪剂,在体研究各种ACV滴眼液在家兔眼部的滞留性。结果与普通ACV滴眼液相比,含CS及TMC的滴眼液在角膜表面的接触角明显降低,解吸时间及在体滞留时间明显延长(P<0.05);与同浓度的CS ACV阳性对照相比,TMC20促进滞留作用较弱,而TMC40作用差异无显著性(P>0.05),而TMC60的作用明显较强(P<0.05)结论 TMC可显著增加ACV的眼部滞留性,且与其DQ呈正相关。     

不同手术方案对脊髓型颈椎病合并椎管狭窄症患者术后疗效及颈椎矢状位参数的影响

目的探讨前路椎体次全切除术和后路椎管扩大椎板成形术对脊髓型颈椎病(CSM)合并椎管狭窄症患者术后疗效及颈椎矢状位参数的影响。方法回顾性分析2010年3月—2015年8月收治的147例CSM合并椎管狭窄症患者的临床资料,其中80例行前路椎体次全切除术治疗(A组),67例行后路椎管扩大椎板成形术治疗(B组)。比较2种手术方法治疗前后日本骨科学会(JOA)评分、Cobb角及矢状位垂直距离(SVA)。将2组患者根据T_1倾斜角分别分为高T_1倾斜角(≥25°)亚组和低T_1倾斜角( 25°)亚组,对不同亚组之间的疗效及手术安全性进行比较。结果 2组术后JOA评分和Cobb角均高于术前,差异有统计学意义(P 0.05)。A组术后SVA低于术前,差异有统计学意义(P 0.05),B组术后SVA与术前相比差异无统计学意义(P 0.05)。A组术后JOA评分和Cobb角均高于B组,SVA低于B组,差异均有统计学意义(P 0.05)。A组中,高T_1倾斜角亚组和低T_1倾斜角亚组JOA评分改善效果和后凸畸形发生率比较差异无统计学意义(P 0.05);B组中,低T_1倾斜角亚组JOA评分改善效果和后凸畸形发生率优于高T_1倾斜角亚组,差异均有统计学意义(P 0.05)。结论相较于后路椎管扩大椎板成形术,前路椎体次全切除术治疗CSM合并椎管狭窄症临床疗效更佳,且有助于改善颈椎矢状位平衡;在高T_1倾斜角水平下,应尽可能选择前路椎体次全切除术。     

Mixed Reality Combined with Three‐Dimensional Printing Technology in Total Hip Arthroplasty: An Updated Review with a Preliminary Case Presentation

Three‐dimensional (3D) printing technology, virtual reality, and augmented reality technology have been used to help surgeons to complete complex total hip arthroplasty, while their respective shortcomings limit their further application. With the development of technology, mixed reality (MR) technology has been applied to improve the success rate of complicated hip arthroplasty because of its unique advantages. We presented a case of a 59‐year‐old man with an intertrochanteric fracture in the left femur, who had received a prior left hip fusion. After admission to our hospital, a left total hip arthroplasty was performed on the patient using a combination of MR technology and 3D printing technology. Before surgery, 3D reconstruction of a certain bony landmark exposed in the surgical area was first performed. Then a veneer part was designed according to the bony landmark and connected to a reference registration landmark outside the body through a connecting rod. After that, the series of parts were made into a holistic reference registration instrument using 3D printing technology, and the patient's data for bone and surrounding tissue, along with digital 3D information of the reference registration instrument, were imported into the head‐mounted display (HMD). During the operation, the disinfected reference registration instrument was installed on the selected bony landmark, and then the automatic real‐time registration was realized by HMD through recognizing the registration landmark on the reference registration instrument, whereby the patient's virtual bone and other anatomical structures were quickly and accurately superimposed on the real body of the patient. To the best of our knowledge, this is the first report to use MR combined with 3D printing technology in total hip arthroplasty.     

中日友好医院分型股骨头坏死腓骨植入治疗的三维有限元分析

文题释义：股骨头坏死中日友好医院分型的有限元分析：根据李子荣等提出的中日友好医院分型，建立股骨头坏死三维模型，分为 M型(内侧型)、C型(中央型)和 L型(外侧型)，其中 L型包括L1型(次外侧型)、L2型(极外侧型)和 L3型(全头型)。通过对建立的模型进行有限元分析，为该分型的保髋治疗提供了一定力学依据，显示外侧柱的存留是精准预防塌陷的重要因素，为进一步实现个体化治疗提供力学基础。 腓骨支撑坏死股骨头保髋手术：是对于早中期股骨头坏死需要保留股骨头患者进行的一种手术方式。首先需对股骨头进行髓芯减压，清除一定坏死骨，空腔填塞松质骨(髂骨为主)，打压结实后植入腓骨(异体或自体)支撑，给坏死区的提供力学支撑及生物学修复，预防股骨头进一步坏死及塌陷。 背景：研究报道股骨头坏死的保髋疗效与外侧柱存留密切相关，中日友好医院分型是根据三柱结构确立的，对股骨头塌陷的预测准确性高。 目的：建立股骨头坏死中日友好医院分型各分型仿真的三维有限元模型，通过有限元分析各分型腓骨植入的力学变化，探讨外侧柱存留对保髋疗效的意义，为该分型的塌陷精准预测提供基础。 方法：建立正常股骨头、中日友好医院分型(M型、C型、L1型、L2型、L3型)股骨头坏死及其腓骨植入3组11种三维有限元模型，运用ANSYS软件进行有限元分析计算，观察各组模型的最大应力值、最大位移值及股骨头内部载荷传递模式。 结果与结论：①坏死组位移最大，应变最大，且因坏死分型不同而位移不同，位移变化如下：M型相似文献   

经络艾灸防治乳腺癌根治术后患侧上肢水肿的效果评价

目的观察循经艾灸预防乳腺癌患者根治术后上肢水肿的效果。方法采用便利抽样法选取乳腺外科乳腺癌根治术的患者150例,随机分为对照组和观察组,每组75例。对照组行常规护理,观察组在对照组基础上在手术侧上肢循经艾灸。于术前1 d、术后第14天和术后1个月,测量两组患者患侧上肢水肿程度。结果观察组术后患侧上肢水肿发生率低于对照组(P<0.05)。结论术后循经艾灸可有效预防乳腺癌根治术后患侧上肢水肿,提高患者舒适度。     

Sensitivity of the environmental costs of air pollution caused by SOx,NOx, and PM from power plants applied to the power mix configuration in South Korea

In the 6th Basic Plan for Long-Term Electricity Supply and Demand (6th BPE) for Korea, for the first time, the environmental costs of air pollution caused by oxides of sulfur (SOx), oxides of nitrogen (NOx), and particulate matters (PM) from power plants were estimated and included. However, several deficiencies in evaluating the environmental costs were found. In this study, (1) the validity of the environmental costs used in the 6th BPE was assessed, (2) a systematic approach was suggested and used to improve the environmental costs estimation, and (3) the sensitivity of the cost of generating electricity to the environmental costs by fuel type with the proposed approach was discussed. We found that the applied environmental costs used in the 6th BPE did not fully include the demographic characteristics of Korea. By applying more realistic parameter values, it was found that the newly estimated environmental cost was about 23 times higher than the cost estimated in the original 6th BPE for coal-fired power plants and about 1.5 times higher for liquefied natural gas (LNG)-fired power plants, suggesting that LNG-fired power plants are more economical if using more realistic environmental costs. Thus, it is critical to check the validity of parameter values when calculating environmental costs.