不同粒度松散煤体的氧扩散特性实验研究

以自行研制的煤对氧扩散特性测试装置为实验手段,在常温环境条件下测试了不同粒度松散煤体对氧的自由扩散特性.实验结果表明:煤样粒度的变化对取气腔氧浓度流出曲线的影响表现出2个极限值,煤样粒度在20～100目之间时,取气腔氧气浓度梯度随煤样粒度的增大而增大;当煤样粒度<20目或>100目时,煤样粒度的再变化对氧浓度流出曲线的影响则微乎其微;取气腔氧浓度曲线流形基本符合指数曲线的变化规律.     

基于模糊信息处理的中板轧机微机在线监测系统

中板轧机是中板厂最重要的生产设备，对其工况进行在线监测意义重大，各种传感器将轧机的工况信息传送给微机系统，微机系统将这些信息进行模糊处理，发出相关信息，指导系统安全，高效运行。     

Formation and Characterization of 1.5-Monolayer Self-Assembled InAs/GaAs Quantum Dots Using Postgrowth Annealing

In this paper, we report that low-density InAs/GaAs quantum dots (QDs) can be formed by postgrowth annealing the samples with 1.5-monolayer (ML) InAs coverage, which is thinner than the critical layer thickness for the Stranski-Krastanov growth. The annealing procedure was performed immediately after the deposition of the InAs layer. The effects of annealing time and annealing temperature on the dot density, dot size, and optical characteristics of the QDs were investigated. The optimum annealing conditions to obtain low-density QDs are longer than 60 s and higher than 500degC . Meanwhile, no luminescence can be observed for the wetting-layer, which may suggest that the postgrowth annealing will make the wetting layer thinner and thus reduce the effects of wetting layer on carrier relaxation and recombination. On the other hand, we observe that a decrease of the PL intensity at the annealing conditions of 60 s and 515degC , which is possibly due to the increasing surface dislocations resulted from the In adatom desorption at higher annealing temperature.     

An Area Optimization Method for Digital Filter Design

In this paper, we propose an efficient design method for area optimization in a digital filter. The conventional methods to reduce the number of adders in a filter have the problem of a long critical path delay caused by the deep logic depth of the filter due to adder sharing. Furthermore, there is such a disadvantage that they use the transposed direct form (TDF) filter which needs more registers than those of the direct form (DF) filter. In this paper, we present a hybrid structure of a TDF and DF based on the flattened coefficients method so that it can reduce the number of flip‐flops and full‐adders without additional critical path delay. We also propose a resource sharing method and sharing‐pattern searching algorithm to reduce the number of adders without deepening the logic depth. Simulation results show that the proposed structure can save the number of adders and registers by 22 and 26%, respectively, compared to the best one used in the past.     

铁通资源管理系统的设计和实现

在分析铁路通信资源结构的基础上,利用地理信息系统技术、数据库技术和客户/服务器(C/S)模式,为铁通(ChinaTietong)各级分公司和运营部门提供一套较为完善的资源管理信息系统。文中分析了铁通资源的结构与资源之间的关联,介绍了系统功能、物理结构及体系结构,详细分析了数据库设计、地理信息系统和系统安全性所采用的关键技术。这套系统的应用对铁通网络管理的现代化将起到重要的推动作用。     

光电双基区晶体管(PDUBAT)的器件模型

本文在考虑了晶体管的小注入效应和大注入效应以及基区宽变效应等因素后,首次用近似和简化的数学表示式和相应的等效电路,描述了光电双基区晶体管(PDUBAT)负阻形成的机理并使负阻区和谷值区的理论计算和实验结果一致性很好.     

Adaptive contour smoothing based on inter-region contrast

An adaptive contour smoothing algorithm designed as a preprocessor for shape coders is presented. In the method, the degree of the adaptive smoothing is controlled based on the significance of each contour point, which is quantified according to inter-region contrast in an intensity image. The actual smoothing consists of an expansion operator and a thinning algorithm.     

塔里木山前复杂地层钻头使用技术

利用测井资料结合实测的岩石力学性质、邻井的岩性剖面建立了岩石力学参数模型,综合解释了单井岩石在纵向剖面上的力学性质。借鉴邻井钻头使用情况,以推广高效PDC钻头为主,介绍了山前构造钻头选型情况。针对山前构造的地层岩性特征,从复合片、刀翼形状、齿型、切削齿力平衡等方面设计和改进了PDC钻头。改进后的钻头使塔里木山前复杂地层钻头使用获得了突破性进展。     

Development of Boundary Structures for Complex-Shaped Buildings

Over the past few years, the field of architecture has witnessed revolutionary changes in design. The recent completions of Frank O. Gehry’s projects brought unprecedented attention to complex-shaped, nonconventional design. In following these latest trends, the author has been drawn to the issue concerning the structural systems currently being adopted in realizing these complicated designs. It is perhaps inevitable that the traditional structural systems, comprised of structural elements suitable for use in conventional linear shapes, face tremendous challenges and limitations in building such complicated designs. In this context, this research consists of proposing a new alternative by employing “boundary structures with continuously changing curvature,” which follow the complex-curved envelope surface, as well as fabricating an experimental model made of polymer composite materials with computer-aided design/computer-aided engineering/computer-aided manufacturing technologies. Consequently, the study aims at offering architects unprecedented freedom in design and a new paradigm for realizing their creative ideas.     

Lipase‐catalyzed dynamic kinetic resolution of (R,S)‐fenoprofen thioester in isooctane

A lipase‐catalyzed enantioselective hydrolysis process under in situ racemization of the remaining (R)‐thioetser substrate with trioctylamine as the catalyst was developed for the production of (S)‐fenoprofen from (R,S)‐fenoprofen 2,2,2‐trifluoroethyl thioester in isooctane. Detailed investigations of trioctylamine concentration on the enzyme activation and the kinetic behavior of the thioester in racemization and enzymatic reactions were conducted, in which good agreement between the experimental data and theoretical results was observed. © 2002 Society of Chemical Industry