Experience of reoperations followed by repairs of abdominal aortic aneurysms

We experienced 8 cases who required reoperations, including 2 re-redo operations, after repairs of infrarenal abdominal aortic aneurysms. Of 8 patients, one patient developed a new aneurysm due to atherosclerosis in thoraco-abdominal aorta involving all visceral arteries and other 7 patients had aneurysmal formations at proximal anastomotic sites, including 3 suprarenal, 2 juxtarenal and 2 infrarenal aortic lesions. Etiology at initial operation in patients who subsequently developed anastomotic aneurysms included vasculo-Beh?et disease in 4, atherosclerosis in 2 and dissecting aortic aneurysms type III due to Marfan syndrome in 1. At reoperation, all who had vasculo-Beh?et disease had ruptures of anastomotic sites and 2 patients underwent repairs of dehiscent patch, 1 extra-anatomic bypass between ascending and abdominal aorta and 1 interposition of graft. One patient who had graft infection after repair of abdominal aortic aneurysm required axillo-femoral bypass with removal of infected graft. A patient who had dehiscence of proximal anastomosis after repair of aortoiliac occlusive disease required interposition of graft. Two patients, Marfan syndrome and aneurysm in thoraco-abdominal aorta, underwent graft replacement of thoraco-abdominal aorta concomitant with reconstruction of all visceral arteries. There were 8 patients who required reoperations for aneurysms at distal anastomotic sites after repairs of abdominal aortic aneurysms. Five patients underwent repairs of new aneurysms, including replacement of total arch in 3, descending aorta in 1 and iliac artery in 1. In all cases, no hospital death was noted, however, late deaths were occurred in vasculo-Beh?et disease, Marfan syndrome and graft infection. Thus, late result depends on etiology of disease. Although patients who requires reoperation after repair of abdominal aortic aneurysms have higher operative risk factors, early and late results are satisfactory compared to initial operations.     

0.81 ?m band AlGaAs/GaAs double-channel planar buried-heterostructure laser with large optical cavity

0.81 ?m-band AlGaAs/GaAs double-channel planar buried-heterostructure laser diodes with large optical cavity have been developed as light sources for use in analogue optical fibre communication systems. Linear light-output/current characteristics and a single-longitudinal-mode spectrum at a modulation frequency f = 100 MHz with modulation index m = 0.9 have been attained.     

Intercritically annealed and isothermally transformed 0.15 Pct C steels containing 1.2 Pct Si-1.5 Pct Mn and 4 Pct Ni: Part I. transformation,microstructure, and room-temperature mechanical properties

Steels containing 0.15 pct C and 1.2 pct Si-1.5 pct Mn or 4 pct Ni were intercritically annealed and isothermally transformed between 300 °C and 500 °C for 1 to 60 minutes. The specimens were subjected to tensile testing at room temperature, and the microstructures were evaluated by light microscopy, scanning and transmission electron microscopy (SEM and TEM, respectively), and X-ray diffraction (XRD). The microstructures consist of dispersed regions of bainite, martensite, and austenite in a matrix of ferrite, and a maximum of 11.6 pct austenite is retained after isothermal holding at 450 °C in the Si-Mn steel. In specimens where austenite transforms to martensite during quenching after isothermal holding, the stress-strain curves show continuous yielding, high ultimate tensile strength (UTS), and relatively low ductility. In specimens where higher volume fractions of austenite transform to bainite during isothermal holding, the stress-strain curves show discontinuous yielding, low UTS, and high ductility.     

Vinyl polymerization, 399. Polymerization of methyl methacrylate with sodium polystyrenesulfonate in presence of polyethyleneglycol

The effect of polyethyleneglycol on the radical polymerization of methyl methacrylate initiated with an aqueous solution of sodium polystyrenesulfonate was studied. Under the definite condition, the conversion of methyl methacrylate raised from 6.6 to 100% by the addition of polyethyleneglycol. It was concluded that polyethyleneglycol acted only as a host of Na⁺, but not as a phase transfer catalyst.     

Microstructure characterization of sol-gel derived PZT films

The crystallization of sol-gel derived amorphous PZT films deposited on a MgO single-crystal substrate and a SiO₂ glass substrate was examined. The pyrochlore crystallites, 5 nm in size, were homogeneously nucleated in the amorphous films at 350 °C. The nucleation temperature of pyrochlore did not depend on the type of substrate. Fine pyrochlore grains were stable even during annealing at high temperatures up to 600 °C. The perovskite formation temperature was dependent on the substrate, and was about 550 °C on the MgO single-crystal substrate and about 750 °C on the SiO₂ glass substrate. The perovskite was heterogeneously nucleated preferentially at the substrate-film interface. Perovskite nucleation was more difficult at the SiO₂ glass-film interface than at the MgO single crystal-film interface. The ease of nucleation reflected the perovskite formation temperature. Perovskite crystals grew fairly rapidly, once they were nucleated in the films. In the multiple-coated films, the interface between successive layers of PZT films was a favourable nucleation site of perovskite, and the columnar perovskite grains passing through the interface were often developed.     

Polysulfide reduction using sulfate-reducing bacteria in a photocatalytic hydrogen generation system

A hydrogen generation process using photocatalytic reactions has been proposed. In this process, hydrogen sulfide is a source of hydrogen and is turned into polysulfide. In order to establish the cyclic operation of a photocatalytic hydrogen generation system, it is necessary to convert polysulfide back into hydrogen sulfide with a small energy input. This paper proposes the use of sulfate-reducing bacteria (SRB) for the regeneration of hydrogen sulfide. Batch cultivation of natural source SRB samples were carried out using a culture medium containing polysulfide as the only sulfur compound source. SRB produced hydrogen sulfide from several kinds of polysulfide sources, including a photocatalytic hydrogen generation-produces solution. Production lag phase and production rate of hydrogen sulfide were affected by initial polysulfide concentration. SRB activity was inhibited at high initial polysulfide concentrations. SRB enrichment culture T2, exhibited the highest hydrogen sulfide production rate, and was able to utilize several kinds of organic matter as the electron donor. The results suggest the possibility of using large biomass sources, such as sewage sludge and the raw garbage in a hydrogen generation system. We developed speculative estimates that an SRB based hydrogen generation system is feasible.