Influence of Cu metal on the domain structure and carrier mobility in single-layer graphene

We demonstrate that domain structure of single-layer graphene grown by ambient pressure chemical vapor deposition is strongly dependent on the crystallinity of the Cu catalyst. Low energy electron microscopy analysis reveals that graphene grown using a Cu foil gives small and mis-oriented graphene domains with a number of domain boundaries. On the other hand, no apparent domain boundaries are observed in graphene grown over a heteroepitaxial Cu(111) film deposited on sapphire due to unified orientation of graphene hexagons. The difference in the domain structures is correlated with the difference in the crystal plane and grain structure of the Cu metal. The graphene film grown on the heteroepitaxial Cu film exhibits much higher carrier mobility than that grown on the Cu foil.     

Rubber‐toughened polyamide‐6 with a low thermal expansion coefficient: effect of preferential distribution of rubber and inorganic filler

The effects of morphological changes on the thermal expansion, toughness and heat resistance of polyamide‐6 (PA)/styrene–ethylene–butylene–styrene (SEBS)/polyphenylene ether (PPE) blends were investigated. Compared with the typical ‘sea (PA matrix)–island (PPE domain)–lake (SEBS in PPE domain)’ morphology, an injection‐molded ternary blend with a preferential distribution of SEBS component at the interface between PA and PPE exhibited a low coefficient of linear thermal expansion (CLTE) in the flow direction. This low CLTE was ascribed to the deformation of SEBS and PA into a co‐continuous microlayer network structure during injection molding. Consequently, the expansion preferentially occurred towards the thickness direction. Further CLTE reduction either by a change in PA viscosity or by the selective location of an inorganic filler was examined, and its influences on impact strength and heat resistance are discussed based on transmission electron microscopy observations. © 2015 Society of Chemical Industry     

Experimental study on method of estimating strength of weld metal in steel structure

We conducted the welding experiment using three kinds of test piece, actual size, diaphragm and butt joint. Then, we examined the influence on strength, cooling time and carbon equivalent of weld metal by welding conditions on the different test pieces. We calculated an estimate of cooling time and chemical components. Consequently, we concluded that the strength of weld metal can be estimated by heat input, interpass temperature, carbon equivarent of welding wire and shape of test piece.     

Effect of Cation Doping on the Superplastic Flow in Yttria-Stabilized Tetragonal Zirconia Polycrystals

The superplastic characteristics of various cation-doped yttria-stabilized tetragonal zirconia polycrystals (Y-TZP) were examined. For 1 mol% cation doping the true stress of Y-TZP is very dependent on the ionic radii of the doped cations; for instance, smaller cation radii give rise to lower true stress when compared with the other compositions for the same grain size, strain rate, and testing temperature. The altered true stress level must be due to the change in diffusivity of the accommodation process for grain boundary sliding caused by the addition of cations in ZrO₂. The strain to failure of the doped zirconia is affected by both ionic radius and valence of the dopant cations.     

Functional binders for reversible lithium intercalation into graphite in propylene carbonate and ionic liquid media

Poly(acrylic acid) (PAA), poly(methacrylic acid) (PMA), and poly(vinyl alcohol) (PVA), which have oxygen species as functional groups, were utilized as a binder for graphite electrodes, and the electrochemical reversibility of lithium intercalation was examined in PC medium and ionic liquid electrolyte, lithium bis(trifluoromethanesulfonyl)amide dissolved in 1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)amide (BMP-TFSA). Columbic efficiency of 75–80% with more than 300 mAh g^?1 was achieved upon first reduction/oxidation cycle in both electrolytes using these binding polymers, which were significantly improved in comparison to a conventional PVdF binder (less than 45% of columbic efficiency for the first cycle). For the graphite-PVdF electrode, co-intercalation and/or decomposition of PC molecules solvating to Li ions were observed by the electrochemical reduction, resulting in the cracking of graphite particles. In contrast, the co-intercalation and decomposition of PC molecules and BMP cations for the first reduction process were completely suppressed for the graphite electrodes prepared with the polymers containing oxygen atoms. It was proposed that the selective permeability of lithium ions was attained by the uniform coating of the graphite particles with PAA, PMA, and PVA polymers, because the electrostatic interaction between the positively charged lithium ions and negatively charged oxygen atom in the polymer should modulate the desolvation process of lithium ions during the lithium intercalation into graphite, showing the similar functions like artificial solid-electrolyte interphase.     

DESCRIPTION OF A THERMO-INELASTIC BODY WITH A MOVING SOLID/LIQUID INTERFACE AND SIMULATION OF THE WELDING PROCESS

Conservation laws of mass, momentum, and energy for the thermo-inelastic body in the region involving the moving interface between the solid and liquid are introduced to derive jump conditions of velocity, stress, and energy on the interface as the sequence of local form for the generalized Reynolds transport theorem. The jump condition of energy is revealed to be the generalized Stefan condition for moving interface problems. The finite element formulation is used to analyze the modes of flow, deformation, and stresses in a melting or solidifying process by employing a viscoplastic constitutive equation that describes the mechanical behavior of both the solid and liquid phases. The mathematical formalism is applied to simulate bead-on plate welding.     

All-solid-state, high-power, deep-UV laser system based on cascaded sum-frequency mixing in CsLiB6O10 crystals

We report on an efficient use of CsLiB(6)O(10) (CLBO) crystals employed for an all-solid-state deep-UV laser system operated at 5 kHz. We obtained greater than 3 W of UV radiation around 242 nm by mixing the 349-nm third harmonic of a Nd:YLF laser with the tunable output from a Ti:sapphire laser in a CLBO crystal. This UV radiation was subsequently mixed with the residual 1047-nm output from the Nd:YLF laser in a second CLBO crystal. The system produced 1.5 W of deep-UV radiation at 196.3 nm, which is, to our knowledge, the highest deep-UV power below 200 nm generated in a nonlinear optical crystal. Additionally, the bandwidth of both outputs was estimated to be less than 200 MHz.     

Influence of sodium impurities on arf excimer-laser-induced absorption in CaF2 crystals

The formation of color centers induced by irradiation with ArF excimer lasers in CaF(2) crystals was found to depend strongly on the sodium impurity concentration. Sodium-related color centers were generated by two-photon absorption because the slope of the induced absorption coefficient just after irradiation started was proportional to the square of the laser fluence. The saturation absorption also depended on laser fluence, and a photobleaching induced absorption phenomenon was observed. We concluded that the saturation absorption level was determined by the equilibrium between two-photon excitation and one-photon reverse reaction.     

Determination of ginsenosides in plant extracts from Panax ginseng and Panax quinquefolius L. by LC/MS/MS

An HPLC/MS/MS method has been developed for the characterization and quantification of ginsenosides contained in extracts of the root of Panax ginseng (Korean ginsengs) and Panax quinquefolius L. (American ginsengs). The [M + H]+ and [M + Na]+ ions were observed for ginsenoside standards (Rb1, Rb2, Rc, Rd, Re, Rf, Rg1) and four different ginseng extracts. The glycosidic linkages, the core, and the attached sugar(s) of the ginsenosides can be determined from the collision-induced dissociation spectra from the protonated molecules. The relative distribution of these ginsenosides in each extract of American or Korean ginseng was established.     

Optimum design of a grazing-incidence flat-field spectrograph with a spherical varied-line-space grating

A grazing-incidence spectrograph is designed by use of the flat-field image-focusing property of a spherical varied-line-space grating. Optimum grating parameters for mechanical ruling are selected by application of genetic algorithms. Two gratings, one for 2-5-nm and the other for 5-20-nm spectral regions, are designed, and their fabrication tolerances are analyzed.