P2井特殊烃组分气测异常显示层探讨

正常的油气显示层气测组分分布遵循一定的规律，而准噶尔盆地西北部的P2井在钻探过程中发现了不符合正常气测分布规律的气测异常显示层，由此引起多方关注与争议。在简述该井气测异常特点及特殊性基础上，对其产生原因进行了探讨，认为第一气测异常层无C1、C2值是由于该层原油为未成熟原油，裂解、降解不彻底所致，第二、第三显示层只有C1则是由于该层为稠油层，C1是微生物降解的结果。通过对相邻区块资料分析，进一步提出了以气测全烃曲线形态为主结合垒烃相对幅度与全烃饱满程度图板的气测异常显示解释评价方法，对于指导其他区块类似情况的研究具有参照作用。     

Stability analysis on single-phase natural circulation in Argonne lead loop facility

One-dimensional linear stability analysis was performed for single-phase lead–bismuth eutectic (LBE) natural circulation. The Nyquist criterion and a root search method were employed to find the linear stability boundary of both forward and backward circulations. It was found that the natural circulations could be linearly unstable in a high Reynolds number region. Increasing loop friction makes a forward circulation more stable, but destabilizes the corresponding backward circulation under the same heating/cooling conditions. The characteristic wavelength of an unstable disturbance is roughly equal to the entire loop length.     

LD泵浦Nd：YVO4内腔倍频激光器获得120mW绿光连续输出

利用半导体激光器（ＬＤ）端面泵浦Ｎｄ：ＹＶＯ＿４和用ＫＴＰ内腔倍频的绿激光器获得了１２０ｍＷ连续、稳定的５３２ｎｍ绿激光输出。泵浦阈值Ｐ＿（ｔｈ）＝１６０ｍＷ，光－光转换效率η＿ｓ＝８．１％。换用激光腔输出耦合镜，在不加ＫＴＰ晶体倍频时，可连续输出１．０６μｍ的红外激光，输出功率为４５０ｍＷ，光－光转换效率为３１％。     

常温生产微粒状PVB树脂的研究

介绍了用常温法生产微粒状 PVB 树脂的新工艺,从而简化了传统法低温生产 PVB 树脂的工艺和设备,减少了设备投资,节省了动力和能源消耗,降低了生产成本。     

Thermodynamic Assessment of DyCl3-MCl （M= Na, K, Rb, Cs） Systems

Using the CALPHAD （Calculation of Phase Diagram） technique, the DyCl3-MCl （M = Na, K, Rb, Cs） systems were optimized and calculated. The modified quasi-chemical model in the pair approximation for short-range ordering was used to describe the Gibbs energies of the liquid phase in these systems. From the measured phase diagram data and experimental thermodynamic properties, a series of thermodynamic functions were optimized base on an interactive computer-assisted analysis. The optimized parameters and the experimental data were thermodynamically self-consistent. The optimized results were discussed.     

基于DNA的诸问题探讨

本文生要研究如何将DNA用于认证,加密及密码分析,并对相关诸问题进行了探讨。     

基于IPv6校园网的智能选课系统的J2EE架构的设计与实现

通过分析IPv6校园网自主学习模式下的自主选课问题,提出了利用J2EE技术构建基于IPv6校园网的智能选课系统的总体结构及具体实现.     

镀锌层上有机物无铬钝化涂层的耐蚀性

选择了一种无毒的水溶性丙烯酸树脂（AC）加入至钼酸盐、磷酸盐中（M）得到一种钝化液（ACM），对镀锌层进行钝化处理以代替有毒的铬酸盐钝化。通过盐雾试验、扫描电镜、电化学测试等手段，研究了该纯化膜的耐蚀性及耐蚀机理。结果表明，热浸镀锌层采用该无毒钝化液进行钝化，可以推迟镀锌层出现白锈的时间，其抗蚀性已接近铬酸盐钝化水平；ACM钝化膜耐蚀性的提高是由于钝化膜中的钼酸盐与丙烯酸树脂产生交联作用，抑制钝化膜裂纹的扩展，同时由于膜层中钼酸盐的缓蚀作用，提高了镀锌层的抗蚀性。     

Enhanced Oil Recovery: The Synthesis of Anthraquinone [1, 2-C] Alkylisoxazole

Anthraquinone [1, 2-C] methylisoxazole is synthesized from 2-ethylanthraquinone through nitration and treating with oleum. The different methods of 2-ethylanthraquinone nitrated were discussed. The optimum conditions were determined. The structure of the product was confirmed by MS and ¹H NMR.     

碳含量对易切削非调质塑模钢组织及性能的影响

研究了碳含量与易切削非调质塑料模具钢性能间的关系。结果表明，随着碳含量的上升，钢的硬度随之而升高，韧性则先升后降，钢的切削性能渐趋恶化。