无纸化建造

本文通过分析先锋建筑师借鉴汽车制造领域的无纸化技术进行的建造实践,揭示了无纸化建造的操作过程,并探讨了无纸化建造的意义,那就是无纸化不仅改变了传统的设计方法,而且改变了传统的建造方式,这将是人类的建造技术发展史上的一场伟大的变革.文章最后探讨了无纸化建造在中国的实践意义.     

哈尔滨炼油厂MTBE装置试生产

介绍了哈尔滨炼油厂ＭＴＢＥ装置的工艺路线、新技术的应用及特点；催化剂的装填及应用情况；总结了生产过程中遇到的一系列问题及解决办法；探索了平稳生产的新徐径，以保证装置安全、平稳、长周期运行；同时对反应器操作温度、催化蒸馏塔操作压力、原料中醇烯比等因素对异丁烯转化率及ＭＴＢＥ产品的影响做了简单的总结。     

CSAa黏弹性表面活性剂压裂液的研制

用化学试荆长链烷基季铵盐CSAa制备了两种VES压裂液并研究了相关性能，其组成（CSAa／水杨酸钠／氯化钾／正丁醇，以g／dL为单位）如下：1．0／0．3／1．0／0．2；2．0／0．6／0．5／0．1。在耐温性测定中，1．0g／dL CSAa压裂液的黏度由30℃时的75．0mPa·s降至50℃时的37．5mPa·s；2．0g／dL CSAa压裂液的黏度由40℃时的225mPa·s逐渐降至55℃时的110mPa·s，再降至60℃时的65．0mPa·s.在1701／s剪切2h后，剪切温度为42℃时1．0g／dL CSAa压裂液的黏度下降26％，剪切温度为53℃时2．0g／dL CSAa压裂液黏度下降9％。陶粒沉降速度测定结果表明，40℃、42℃时的1．0g／dL CSAa压裂液（黏度分别为60和54mPa·s）和50℃、53℃时的2．0g／dLCSAa压裂液（黏度分别为180和145mPa·s）携砂性能良好，而45℃、50℃时的1．0g／dLCSAa压裂液和55℃、60℃时的2．0g／dL CSAa压裂液，携砂性能则较差或很差。认为VES压裂液的携砂性能来源于棒状胶束网络，并不全由压裂液黏度决定。还考察了VES压裂液的破胶性能。图1表2参5。     

55t/h锅炉技术改造成功经验

介绍了35t／h锅炉扩容改造为55t／h非标锅炉的技术成功经验。从增加锅炉的容积、受热面面积、燃烧器喷嘴改造三个方面介绍了对锅炉本体的改造，改造后实现了锅炉的水位、汽温及燃烧自动调节，提高了锅炉的热效率为以后的锅炉扩容改造提供了实践经验。     

中碱值硫化烷基水杨酸钙的制备及性能研究

介绍了一种碱值达170mgKOH／g以上、硫含量大于3．0％、钙含量大于6．0％的硫化烷基水杨酸钙盐润滑油添加剂的制备过程及其性能。实验中重点考察了促进剂及硫磺加入量对产品碱值及硫含量的影响；通过冷冻蚀刻电镜法观察了含碳酸盐的胶体粒子结构及粒度分布情况；应用凸轮挺校、四球试验机等考察了硫化烷基水杨酸钙盐产品的极压抗磨性能。结果表明，硫化烷基水杨酸钙产品不但具有良好的高温洁净性、抗氧化安定性、胶体稳定性，而且具有突出的极压抗磨性及热稳定性。     

多部件设备维修问题研究及遗传算法求解

合理组织设备维修，缩短设备维修时间是生产运营管理的一个重要环节。本文探讨了多部件设备维修的有效组织问题。考虑到维修工人对拆分后设备的不同部分具有不同的维修效率，提出了一种基于维修时间优化的决策方法，将其与经典指派方法进行了比较；进一步地，对这一NP-hard问题设计了遗传算法，通过数值例子讨论了其求解有效性。     

Convergence of simultaneous perturbation stochastic approximation for nondifferentiable optimization

We consider simultaneous perturbation stochastic approximation for function minimization. The standard assumption for convergence is that the function be three times differentiable, although weaker assumptions have been used for special cases. However, all work that we are aware of at least requires differentiability. We relax the differentiability requirement and prove convergence using convex analysis.     

Competitiveness of Inexperienced and Experienced Contractors in Bidding

This paper tests the assertion that experienced contractors are more competitive than inexperienced contractors by measuring the effect of experience on bidding competitiveness for building contracts procured by a regular client. Contractors are grouped into experienced and inexperienced contractors, and two levels of contractors’ experience are identified: (1) bidding experience only and (2) bidding plus construction experience. Results of two-sample t tests show that experienced contractors are more competitive than inexperienced contractors. Contractors’ competitiveness in respect of school contracts and other contracts are further compared in evaluating the relationship between the project type and experience effect. Experienced contractors are, on average, more competitive in competing for school contracts. It emerges that the factor of project type familiarity amplifies the experience effect. A comparison of experienced contractors’ competitiveness in bidding for (1) new building works and (2) alteration and extension works shows that the effect of experience would be more significant when contract works packages are highly standardized.