Sintering study of injection molded W-8%Ni-2%Cu compacts from mixed powders by thermoanalytical techniques

Heavy alloy parts from W-8%Ni-2%Cu powder mix were fabricated by MIM using a feedstock with 50 vol.% binder. The binder was removed by solvent de-binding followed by thermal de-binding. Sintering of the heavy alloy brown parts was investigated by employing various thermoanalytical techniques such as DIL, TGA and DTA up to 1460 °C. During sintering, the evolved gases were analyzed in a mass spectrometer which was coupled to the dilatometer. Thermal analysis helps to understand the sintering process regarding phase transformation, melting of alloy matrix and chemical reactions. From these thermoanalytical measurements, a kinetic analysis was made. High sintered density (> 99%) and fine-grained homogeneous microstructures were achieved by rate controlled sintering as confirmed by metallographic analysis.     

Multi-objective optimization of oblique turning operations using finite element model and genetic algorithm

Multi-objective optimization of oblique turning operations while machining AISI H13 tool steel has been carried out using developed finite element (FE) model and multi-objective genetic algorithm (MOGA-II). The turning operation is optimized in terms of cutting force and temperature with constraints on required material removal rate and cutting power. The developed FE model is capable to simulate cutting forces, temperature and stress distributions, and chip morphology. The tool is modeled as a rigid body, whereas the workpiece is considered as elastic–thermoplastic with strain rate sensitivity and thermal softening effect. The effects of cutting speed, feed rate, rake angle, and inclination angle are modeled and compared with experimental findings. FE model is run with different parameters with central composite design used to develop a response surface model (RSM). The developed RSM is used as a solver for the MOGA-II. The optimal processing parameters are validated using FE model and experiments.     

Evaluation of a TEST-yolk sperm capacitation system for use in bovine in vitro fertilization.

Bovine sperm acquire the ability to penetrate zona-free hamster oocytes (capacitation) after incubation in TEST-yolk buffer. Our objective was to determine whether such sperm could penetrate zona-intact bovine oocytes in vitro. Bovine cumulus enclosed oocytes from 2- to 5-mm follicles were incubated in maturation medium for 24 h at 37 degrees C. Ejaculated bovine semen was diluted 1: 10 in TEST-yolk buffer, cooled to 4 degrees C, and stored for 8 h to induce capacitation. Sperm were then washed thrice in pH 7.6, .15 M NaCl containing .1% bovine serum albumin V (37 degrees C) and diluted to 2 x 10(6) sperm/ml in fertilization medium. Droplets of fertilization medium containing capacitated sperm, killed sperm, or no sperm were made under paraffin oil. Oocytes (matured 24 h) were added and cocultured with sperm for 8 h and then transferred to fresh fertilization medium for 40 h. After 24 h, 53% of the oocytes had matured (metaphase II). The fertilization rate of the metaphase II oocytes (203) with TEST-yolk capacitated sperm was 87%, whereas the parthenogenetic controls were 2 and 0%, respectively. Therefore, TEST-yolk buffer can be used to capacitate bull sperm for in vitro fertilization.     

A Multiagent Based Scheme for Unlicensed Spectrum Access in CR Networks

In recent wireless network domains static spectrum access is a major concern. Generally, this access leads to spectrum scarcity problem by creating empty holes or white spaces. However, the scarcity is temporary and can be alleviated if spectrum access is performed dynamically and efficiently. One important step towards dynamic spectrum access is the development of cognitive radio (CR) technology, which senses nearby spectrum portions (or bands) and tries to use them either opportunistically or by negotiating with the neighboring users. Nonetheless, dynamic spectrum access raises several challenges which need to be addressed in detail. These challenges include efficient allocation of spectrum for users in order to maximize spectrum utilization and to avoid user level conflicts both under licensed and unlicensed bands. In this paper, considering the relative rarity of solutions for unlicensed spectrum access and their inadequacy, we propose a scheme, where the CR devices (equipped with agents) interact with their neighbors to form several coalitions over the unlicensed bands. These types of coalitions can provide a less-conflicted access as the agents mutually agree for spectrum sharing and they allow other CR users to enter in their vicinity of acquired spectrum via bilateral message exchanges. Further, we present continuous time Markov chains to model the spectrum access process in continuous time and derive important performance metric as the blocking probability for without and with queuing systems. Amongst others, the important comparisons we made between analytical and simulation results in terms of blocking probability verify that our proposed model is correct. In essence, our proposed solution aims to increase dynamic spectrum usage by enabling cooperation between the users.     

Simulations Based Design for a Large Displacement Electrostatically Actuated Microrelay

An electrostatically actuated microrelay with large displacement, small actuation voltage and limited plate surface dimensions is designed to meet stringent telecommunication switching requirements. Fabrication feasibility and performance characteristics of the device are evaluated using a commercial CAD for MEMS tool. Simulation results of the device performance including pull-in voltages for different suspension stiffness variations, natural frequencies, stresses and restoring forces are presented.     

Rheological Properties of Soybean β-Conglycinin in Aqueous Dispersions: Effects of Concentration,Ionic Strength and Thermal Treatment

Steady shear and dynamic oscillatory measurements were used to investigate the effect of concentration, ionic strength and thermal treatment on rheological properties of soybean β-conglycinin in aqueous dispersions. SDS-PAGE and Differential Scanning Calorimetry (DSC) showed that β-conglycinin exhibited partial denaturation and formation of aggregates during isolation. Under steady shear flow, strong shear-thinning behavior was observed with increasing shear rate from 0.001 to 1200 s^?1. A dispersion of β-conglycinin (≥5% w/v, without applying thermal treatment) exhibited gel-like dynamic mechanical spectra at 20°C. This suggested that β-conglycinin in aqueous dispersions showed rheological properties of typical weak gel-like (entanglement) or semi diluted polymeric solution. Weak gel network of β-conglycinin was susceptible to ionic strength, suggesting that electrostatic forces play an important role in the formation of weak gel network. These properties of β-conglycinin have practical significance for the food processors in the formulation of new products.     

Effect of CuO-, SiO2-, and Al2O3-based nanofluids on automotive cooling systems from laminar to turbulent flow regime—A CFD study

In recent studies, much attention has been given to nanofluids suggesting that adding nanoparticles in base fluids offers a higher heat transfer rate compared with conventional fluids. This study is based on the numerical investigation of different types of nanofluids, consisting of CuO (50 nm), SiO₂ (40 nm), and Al₂O₃ (15 nm) nanoparticles at different volume concentrations. Several simulations were performed from low to high Reynolds numbers, corresponding to laminar and turbulent flow regimes using ANSYS-Fluent CFD solver. Results suggest that under a laminar flow regime with the same Reynolds number of 2000, CuO-based nanofluids perform better as compared with SiO₂ and Al₂O₃-based nanofluids with Nusselt number (Nu) having percentage increase of 90% and 60% comparing with SiO₂- and Al₂O₃-based nanofluids, respectively. However, at higher Reynolds numbers when the flow is turbulent, Al₂O₃-based nanofluids demonstrate better performance having a percentage increase in Nusselt numbers equal to 40% and 23% as compared with CuO and SiO₂-based nanofluids respectively under the same Reynolds number of 15,000. This implies that turbulence has a significant effect on heat transfer rate, and is not only related to thermal conductivity. This study will help in designing more compact cooling systems for engines and the internal environment of motor vehicles.     

Effects of individual and combined administration of ochratoxin A and aflatoxin B1 in tissues and eggs of White Leghorn breeder hens

BACKGROUND: Mycotoxins, the secondary fungal metabolites, are unavoidable contaminants of human and animal food and feeds. The objectives of this study were to evaluate the effect of concurrent feeding of ochratoxin A (OTA) and aflatoxin B₁ (AFB₁) to breeder hens, upon their deposition in different tissues and eggs. RESULTS: Residues of OTA and AFB₁ in (ng g^?1) were significantly higher in liver followed by kidneys and breast muscles by 22.54 ± 1.48, 4.22 ± 0.93 and 0.56 ± 0.06 for OTA (group fed OTA at 5 mg kg^?1 diet) and 1.44 ± 0.21, 0.25 ± 0.01 and 0.03 ± 0.01 for AFB₁ (group fed AFB₁ at 5 mg kg^?1 diet), respectively. Residues of OTA and AFB₁ in eggs appeared at days 3 and 5 of toxin feeding and disappeared at days 5 and 6 of withdrawal of mycotoxins contaminated feed, respectively. The residues of OTA and AFB₁ were significantly lower in the tissues of hens fed these toxins concurrently compared with the groups fed OTA and AFB₁ independently. CONCLUSIONS: Residues of OTA and AFB₁ appeared in the tissues and eggs of laying hens kept on OTA‐ and AFB₁‐contaminated diets. Concurrent feeding of OTA and AFB₁ to hens significantly decreased the concentration of OTA and AFB₁ residues in the tissues and eggs. Copyright © 2011 Society of Chemical Industry     

An investigation into gamma-ray treatment of shellfish using electron paramagnetic resonance spectroscopy

BACKGROUND: Gamma irradiation is a safe method for the decontamination of shellfish, and its technical feasibility and safety have been endorsed (FAO/IAEA/WHO). In order to implement proper food‐processing regulations, the identification of radiation treatment is required. In this study, electron paramagnetic resonance (EPR) spectroscopy was employed to identify the irradiation of seven different types of commonly consumed shellfish. RESULTS: Characteristics (g factor and signal intensity) of the EPR spectra of control and irradiated samples were recorded in order to clarify the gamma‐ray treatment of shellfish. Radiation‐specific signals around g = 2.0038 ± 0.0006 (g₁) and g = 1.9996 ± 0.0002 (g₂ and g₃) were observed for all shellfish samples irradiated with absorbed doses of 3 and 6 kGy. The X‐ray diffraction (XRD) spectra of some shellfish samples were recorded to investigate their mineral profiles. CONCLUSION: The EPR spectroscopic results indicated that carbonate minerals were the source of the paramagnetic species that were produced upon irradiation, entrapped in the shellfish and showed radiation‐specific asymmetric signals whose intensities increased quantitatively with the absorbed radiation dose. The XRD analysis revealed that aragonite and calcite minerals were present in the shells of shellfish. Copyright © 2011 Society of Chemical Industry     

Numerical investigation & comparison of a tandem-bladed turbocharger centrifugal compressor stage with conventional design

Extensive numerical investigations of the performance and flow structure in an unshrouded tandem-bladed centrifugal compressor are presented in comparison to a conventional compressor. Stage characteristics are explored for various tip clearance levels, axial spacings and circumferential clockings. Conventional impeller was modified to tandem-bladed design with no modifications in backsweep angle, meridional gas passage and camber distributions in order to have a true comparison with conventional design. Performance degradation is observed for both the conventional and tandem designs with increase in tip clearance. Linear-equation models for correlating stage characteristics with tip clearance are proposed. Comparing two designs, it is clearly evident that the conventional design shows better performance at moderate flow rates. However; near choke flow, tandem design gives better results primarily because of the increase in throat area. Surge point flow rate also seems to drop for tandem compressor resulting in increased range of operation.