A Rapid and Eco-Friendly Method for Determination of Hydrolysable Tannins and Its Application to Honey Samples

This paper describes the development of a rapid and clean method for the determination of hydrolysable tannins in honey samples, focusing on an easy and green sample pretreatment and low generation of waste. The proposed method is based on the reaction between KIO₃ and hydrolysable tannin compounds in acetate buffer medium (pH 4.75), with formation of a colored product measured at 525 nm. The analytical conditions were optimized using experimental design (central composite design). The linear range obtained was 40.0–740 mg L^?1 (r?=?0.998), and the detection (LOD) and quantification (LOQ) limits were 12.2 and 40.8 mg L^?1, respectively. Acetate buffer was used to ensure formation of the colored product obtained by reaction between the chromogenic reagent and the analyte. The method showed good results when applied to honey samples, with recoveries in the range of 78.3–96.1 %, and the use of diffuse reflectance spectroscopy coupled with spot test analysis provided low reagent consumption and minimized waste generation. The results obtained with the proposed method were confirmed by a spectrophotometric method.     

Sintering of porous alumina obtained by biotemplate fibers for low thermal conductivity applications

In this research report, a sintering process of porous ceramic materials based on Al₂O₃ was employed using a method where a cation precursor solution is embedded in an organic fibrous cotton matrix. For porous green bodies, the precursor solution and cotton were annealed at temperatures in the range of 100–1600 °C using scanning electron microscopy (SEM) and thermogravimetric (TG) analysis to obtain a porous body formation and disposal process containing organic fibers and precursor solution. In a structure consisting of open pores and interconnected nanometric grains, despite the low porosity of around 40% (calculated geometrically), nitrogen physisorption determined a specific surface area of 14 m²/g, which shows much sintering of porous bodies. Energy dispersive X-ray (EDX) and X-ray diffraction (XRD) analytical methods revealed a predominant amount of α-Al₂O₃ in the sintered samples. Thermal properties of the sintered Al₂O₃ fibers were obtained by using the Laser Flash which resulted in the lower thermal conductivity obtained by α-Al₂O₃ and therefore improved its potential use as an insulating material.     

Heuristic knowledge-based heliostat field control for the optimization of the temperature distribution in a volumetric receiver

The paper presents the development and implementation of a heuristic knowledge-based heliostat control strategy optimizing the temperature distribution within a volumetric receiver at the Plataforma Solar de Almería (PSA) power tower plant. The experience in operating the plant has been used in the development of an automatic control strategy that provides an appropriate flux distribution within the volumetric receiver in order to obtain a desired temperature profile, and allows for operation without a continuous intervention of the operator, which is one of the main characteristics and drawbacks in the exploitation of these kinds of plants. Experimental results are included and discussed in the paper.     

The material basis for reduced mechanical properties in oim mice bones

Osteogenesis imperfecta (OI), a heritable disease caused by molecular defects in type I collagen, is characterized by skeletal deformities and brittle bones. The heterozygous and homozygous oim mice (oim/+ and oim/oim) exhibit mild and severe OI phenotypes, respectively, serving as controlled animal models of this disease. In the current study, bone geometry, mechanics, and material properties of 1-year-old mice were evaluated to determine factors that influence the severity of phenotype in OI. The oim/oim mice exhibited significantly smaller body size, femur length, and moment of area compared with oim/+ and wild-type (+/+) controls. The oim/oim femur mechanical properties of failure torque and stiffness were 40% and 30%, respectively, of the +/+ values, and 53% and 36% of the oim/+ values. Collagen content was reduced by 20% in the oim/oim compared with +/+ bone and tended to be intermediate to these values for the oim/+. Mineral content was not significantly different between the oim/oim and +/+ bones. However, the oim/oim ash content was significantly reduced compared with that of the oim/+. Mineral carbonate content was reduced by 23% in the oim/oim bone compared with controls. Mineral crystallinity was reduced in the oim/oim and oim/+ bone compared with controls. Overall, for the majority of parameters examined (geometrical, mechanical, and material), the oim/+ values were intermediate to those of the oim/oim and +/+, a finding that parallels the phenotypes of the mice. This provides evidence that specific material properties, such as mineral crystallinity and collagen content, are indicative and possibly predictive of bone fragility in this mouse model, and by analogy in human OI.     

Optimal Operation of Pressurized Irrigation Networks with Several Supply Sources

The evolution of water distribution systems to pressurized networks has improved water use efficiency, but also significantly increased energy consumption. However, sustainable irrigated agriculture must be characterized by the reasonable and efficient use of both water and energy. Irrigation sectoring where farmers are organized in turns is one of the most effective measures to reduce energy use in irrigation water distribution networks. Previous methodologies developed for branched irrigation networks with one single source node have resulted in considerable energy savings. However, these methodologies were not suitable for networks with several water supply points. In this work, we develop an optimization methodology (WEBSOM) aimed at minimizing energy consumption and based on operational sectoring for networks with several source nodes. Using the NSGA-II multi-objective genetic algorithm, the optimal sectoring operation calendar that minimizes both energy consumption and pressure deficit is obtained. This methodology is tested in the irrigation district of Palos de la Frontera (Huelva, Spain) with three pumping stations, showing that potential annual energy savings of between 20 % and 29 % can be achieved, thus ensuring full pressure requirements in nearly all hydrants, along with the total satisfaction of irrigation requirements.     

Estimation of effective solar irradiation using an unscented Kalman filter in a parabolic-trough field

Measurement of direct solar radiation has been shown to be very useful to improve control performance and disturbance rejection in solar fields by anticipating the effect of sudden changes in solar radiation due to clouds. Since direct solar radiation is measured locally by pyrheliometers, important errors in the estimation of the overall effective solar radiation can be produced when the pyrheliometer is covered by clouds while the rest of the solar field is not or viceversa. Furthermore, estimation of the overall efficiency affected by the reflectivity and absortance of metal tubes is very difficult because only local measurements can be obtained. This work proposes an algorithm for estimating overall solar radiation and efficiency at the field. The algorithm uses an unscented Kalman filter and it is validated by data obtained at the Plataforma Solar of Almer?´a (Spain).     

Understanding the mechanisms of thermal disintegrating treatment in the reduction of sludge production.

Among the technologies aimed at reducing sludge production, the combination of thermal treatment at 95 degrees C of sludge and the activated sludge process is a promising route. The feasibility of such a combined process is demonstrated (up to 60% sludge reduction) and the impacts of operating conditions on its efficiency are presented. Major emphasis was put on understanding the complex phenomena occurring within the thermal treatment: release and biodegradability of sludge organic matter, impact on the biological activity (decay, maintenance requirements, etc.). These effects were taken into account for the development of an ASM1-based model. Comparison between the modeling approach and experimental data (continuous and batch) showed that thermal treatment had three major issues partly explaining the reduction of sludge production: (i) a low release of organics; (ii) an immediate and reversible biological inactivation associated with additional maintenance energy requirements; and (iii) a potential inert production.     

Antioxidant and antiglycation properties of Passiflora alata and Passiflora edulis extracts

The leaves of Passiflora alata Dryander and Passiflora edulis Sims, traditionally used in American countries to treat both anxiety and nervousness by folk medicine, are rich in polyphenols, which have been reported as natural antioxidants. In this study, the antioxidant activities of P. edulis and P. alata hydroalcoholic leaf extracts were verified in in vitro and ex vivo assays. P. alata showed a higher total reactive antioxidant potential than did P. edulis. The antioxidant activities of both extracts were significantly correlated with polyphenol contents. In addition, both extracts attenuated ex vivo iron-induced cell death, quantified by lactate dehydrogenase leakage, and effectively protected against protein damage induced by iron and glucose. These findings demonstrate that the P. alata and P. edulis leaf extracts have potent in vitro and ex vivo antioxidant properties and might be considered as possible new sources of natural antioxidants.