Deposition of DLC film with adhesive W-DLC layer on stainless steel and its tribological properties

Tribological properties of a diamond-like carbon (DLC) coating with an adhesive tungsten-containing DLC (W-DLC) layer were investigated. The coatings were deposited onto AISI316L steel substrates and Si wafers using plasma enhanced chemical vapor deposition and tungsten co-sputtering of the metal target. Methane and argon gases were used as the precursor of the coatings. In this study, three types of coatings were evaluated: DLC/W-DLC on AISI316L (DLC-1), DLC/W-DLC on Si wafer (DLC-2), and DLC on Si wafer (DLC-3). The structural characterizations were performed by transmission electron microscopy and tapping mode atomic force microscopy. At the boundary between the W-DLC layer and the AISI316L substrate, microscopic decohesion or delamination was not observed. The surface roughness of the DLC-1 coating was greater than that of the DLC-2 coating. This feature was derived from the surface roughness of the initial surface of the AISI316L substrate. Friction tests were performed using a rotation-type ball-on-flat configuration tribometer. The observed friction of the DLC-1 coating was unstable compared with the DLC-2 or DLC-3 coatings. This was due to wear debris which had risen to the friction surface resulting in unstable friction on the DLC-1 coating. During the friction studies, the top DLC layer was removed from the adhesive W-DLC layer because the adhesive strength at this part was not enough. In order to achieve the low and stable friction of the DLC coating with the W-DLC layer on AISI316L, it is necessary to improve the smoothness of the surface and the adhesion between the DLC coating and the W-DLC layer.     

Molecular structures of gellan gum imaged with atomic force microscopy (AFM) in relation to the rheological behavior in aqueous systems in the presence of sodium chloride

Aqueous solutions of gellan gum with comparable molecular mass but with different acyl contents were investigated by atomic force microscopy and rheological measurements in the presence of sodium chloride (NaCl). Results obtained were discussed in relation to our previous report using potassium chloride (KCl) as an added salt. For a low-acyl sample, continuous fibrous network structures were identified microscopically as in the case of KCl. The network structures were more heterogeneous than those formed with KCl in terms of the height distribution of molecular assemblies. Rheological thermal hysteresis between sol–gel transitions was detected as in the case of KCl. The storage modulus (G′) of the gelled system was ca. 15% of the corresponding data with KCl at 20 °C. For a high-acyl sample, no continuous network structures were identified but branches with observable ends were identified as in the case of KCl. The hysteresis was less evident than the corresponding data with KCl and for the low-acyl sample with NaCl. Also, G′ values at 20 °C were ca. 30% and 20% of the corresponding data with KCl and for the low-acyl sample with NaCl, respectively. Continuousness and homogeneity of network structures related to the hysteresis and elasticity of the system, respectively.     

Parity induced edge-current saturation and current distribution in zigzag-edged graphene nano-ribbon devices

We show computationally that the current-voltage characteristics of the zigzag-edged graphene nanoribbon (ZGNR) with the even width exhibit remarkable current saturation behavior in spite of the absence of the bandgap. Mechanism of such current-saturation behavior can be understood to be originated from the symmetries of the wavefunctions corresponding to the edge states in ZGNR. We further demonstrate that the current-voltage characteristics of ZGNR can be drastically changed even by the presence of a single lattice vacancy, with the strong dependence on the position of the vacancy. The origin of such properties is intuitively understood by analyzing the transmission probabilities through such systems.     

A method to determine direct‐ and quadrature‐axis inductances of permanent magnet synchronous motors

The equivalent circuit constants of permanent magnet synchronous motors are needed in the calculation of operation characteristics, construction of a control system, etc. These constants can be computed from the data on structural form and materials. However, measurements are necessary to obtain highly precise values. Methods for measurement of the d‐ and q‐axis inductances can be roughly divided into rotational and standstill methods. The standstill methods have the advantage that they are easy to carry out. However, it is difficult to consider magnetic saturation and distortion of the change in the armature winding inductance. The accuracy of the standstill method can be improved if these effects can be readily taken into account. This paper describes a standstill method for measuring accurate d‐ and q‐axis synchronous inductances of permanent magnet synchronous motors. By utilizing the fact that the EMF interference terms in the motor voltage equation considering the distortion of the inductance change are equal to zero when the rotor is in a specific position, the proposed method determines the inductances considering both magnetic saturation and inductance distortion effects from simple off‐line standstill testing. In addition, this method is capable of taking cross‐magnetic saturation into account when used with the necessary testing equipment. The proposed method was implemented on a 0.4‐kW interior permanent magnet synchronous motor with concentrated stator winding. The validity of the proposed method was demonstrated by comparing the measured and calculated results of the no‐load and on‐load characteristics. © 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 171(3): 41–50, 2010; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20969     

Cloning and characterization of a β-N-acetylglucosaminidase (BmFDL) from silkworm Bombyx mori

In insects, β-N-acetylglucosaminidase (GlcNAcase) participates in critical physiological processes such as fertilization, metamorphosis, and glycoconjugate degradation. Insects produce glycoproteins carrying paucimannosidic-type N-glycans, the terminal GlcNAc residue of which is cleaved by a GlcNAc-linkage specific GlcNAcase, also known as the fused lobes (FDL) protein. To obtain information on the structure of GlcNAcases and insight into their contribution to physiological processes, we cloned Bombyx mori FDL (BmFDL) from silkworm larvae. The full-length cDNA (1.9 kb) encoded a protein of 633 amino acids with 42% amino acid sequence identity to Drosophila melanogaster FDL (DmFDL). Recombinant BmFDL cleaved only β-1,2-linked GlcNAc residues from the α-1,3 branch of biantennary N-glycan. This substrate specificity was similar to that of DmFDL. Microsomal FDL activity was inhibited by anti-BmFDL antibodies. Taken together, our results suggest that BmFDL is a N-glycan-processing GlcNAcase in B. mori.     

Template-free hydrothermal synthesis of hollow hematite microspheres

Hollow hematite (α-Fe₂O₃) microspheres with an average diameter of 3-4 μm and a shell thickness of approximate 150 nm was synthesized by a simple hydrothermal route using FeCl₃·6H₂O solution and acetic acid without using any templates. The hollow microspheres were composed of α-Fe₂O₃ nanoparticles with the diameter range from 20 to 40 nm. The effects of reaction parameters such as reaction time, temperature, concentration of FeCl₃·6H₂O solution, and initial pH on the morphology of the final products were investigated. A possible formation mechanism of hollow α-Fe₂O₃ microspheres was also proposed, where the acetic acid played a role of etching in the formation of hollow structure.     

Involvement of cytochrome P450 in hydroxylation of propylbenzene by Fusarium moniliforme strain MS31

Fusarium moniliforme strain MS31 can oxidize propylbenzene to (R)-1-phenylpropanol with what may be a cytochrome P450. Hydroxylation of propylbenzene needed molecular oxygen, and NADPH as a coenzyme gave a higher yield than NADH. The hydroxylation proceeded further when FAD and FMN were added than in their absence, suggesting that the enzyme was a flavo-protein. Carbon monoxide inhibited the hydroxylation, as did other cytochrome P450 inhibitors such as SKF 525A and miconazole. These characteristics matched those of a microsomal cytochrome P450 monooxygenase system that contained NADPH-cytochrome P450 reductase.     

First paralytic shellfish poison (PSP) infestation of bivalves due to toxic dinoflagellate Alexandrium tamiyavanichii, in the southeast coasts of the Seto Inland Sea, Japan

The mussel Mytilus edulis and the cultured ark shell Anadara broughtonii in the southeast coasts of the Seto Inland Sea were contaminated with paralytic shellfish poison (PSP) following the appearance of the dinoflagellate Alexandrium tamiyavanichii in early December 1999. A. tamiyavanichii plankton collected around the Straits of Naruto on December 3, 1999 showed PSP toxicity, of which 83 mol% was accounted for by GTX2, GTX3 and GTX4. Its specific toxicity was 112.5 fmol/cell, and one MU was equivalent to 7,200 cells. Toxicity values at the beginning of toxification were 4.7 MU/g for the ark shell and 7.3 MU/g for the mussel. In the former, the value remained at almost 4 MU/g, resulting in prohibition of marketing for about two months. In the latter, it sharply decreased to less than 4 MU/g. These bivalves collected during the toxification period were dissected into five tissues, mantle, adductor muscle, hepatopancreas, gills and "others", and submitted to high-performance liquid chromatography (HPLC). The cultured ark shell accumulated GTX2, GTX3 and STX as major components and GTX1, GTX4, GTX5, neoSTX, dcSTX and PX1-3 (C1-C3) as minor ones. The amount of GTX3 decreased with time, while STX tended to increase. At the early stage of PSP toxification, toxins were accumulated in the gills and "others", most of which were quickly detoxified. On the other hand, PSP of the toxified mussel consisted of GTX4 as a main component, and GTX1, GTX2, GTX3, GTX5, STX and PX1-2 (C1-C2) as minor ones. Its toxin composition pattern was similar to that of the ingested causative plankton. Its total toxin decreased soon after disappearance of the dinoflagellate. During the decrease of toxicity, PSP tended to be retained in the hepatopancreas, resulting in accumulation of 50 mol% of total toxin.     

Effect of active oxygen species on the productivity of torularhodin by Rhodotorula glutinis No. 21

The effect of active oxygen species on the productivity of torularhodin, an effective antioxidant, by soil yeast, Rhodotorula glutinis no. 21, was examined. Methylene blue, methyviologen and AAPH [2,2'-azobis(2-amidinopropane) dihydrochloride] were used as generators of singlet oxygen, superoxide anion radicals and peroxy radicals, respectively. All of them indicated effectiveness at a dose of 1.0 x 10(-10) to 3.0 x 10(-6) M. Addition of these generators to the culture medium had almost no influence on the biosynthesis of beta-carotene, whereas it had marked enhancement on those of torulene and torularhodin. Production of uric acid by xanthineoxidase remained unchanged at a torularhodin concentration of up to 100 microM. This result suggests that torularhodin does not directly affect the productivity of superoxide anions. It has been proved that torularhodin has a more potent effect on the scavenging of peroxyl radicals and inhibits substrate degradation by singlet oxygen more effectively than beta-carotene does. Continuous addition of methylene blue enhanced the torularhodin accumulation more markedly than single addition.     

Updated data dissemination methods for updating old replicas in ad hoc networks

In this paper, we propose two updated data dissemination methods to not only reduce the number of accesses to old replicas, but also to improve the data accessibility in ad hoc networks where data items are updated regularly. In the first method, when a mobile host updates a data item, it disseminates the updated data item after the flooding of with invalidation reports. In the second method, two newly connected mobile hosts disseminate updated data items with each other after the flooding with invalidation reports.