A modified θ projection model for constant load creep curves-II. Application of creep life prediction

To minimize the deviation of the predicted creep curves obtained under constant load conditions by the original θ projection model, a new modified version that can be expressed by $\epsilon ={\theta }_1\left(1-e^{-{\theta }_{2}t}\right)+{\theta }_3\left(e^{{\theta }_4{e}^{{\theta }_5\epsilon }t}-1\right)$, was derived and experimentally validated in our last study. In the present study, the predictive capability of the modified θ projection model was investigated by comparing the simulated and experimentally determined creep curves of K465 and DZ125 superalloys over a range of temperatures and stresses. Furthermore, the linear relationship between creep temperature and initial stress was extended to the 5-parameter model. The results indicated that the modified model could be used as a creep life prediction method, as it described the creep curve shape and resulted in predictions that fall within a specified error interval. Meanwhile, this modified model provides a more accurate way of describing creep curves under constant load conditions. The limitations and future direction of the modified model were also discussed. In addition, this modified θ projection model shows great potential for the evaluation and assessment of the service safety of structural materials used in components governed by creep deformation.     

Effect of poly(acrylic acid) on the preparation of thick silica films by electrophoretic sol–gel deposition of re-dispersed silica particles

Thick silica films were prepared by the electrophoretic sol–gel deposition technique in the presence of poly(acrylic acid) (PAA) using monodispersed silica particles; the particles were prepared by the sol–gel method, pre-heat treated and then re-dispersed in the mixture of H2O and ethanol. The weight of deposited silica films was maximized when 0.2 mass % of PAA against the whole amount of sol was added. The particles constructing the thick silica films were packed densely when the amount of added PAA was less than 0.2 mass%. The weight of the film increased with decrease in the content of H2O in the sol when a fixed amount of PAA was added. After the heat treatment of deposited films at 800 °C, crack-free silica films of about 30 m thickness were prepared. © 1998 Chapman & Hall     

Synchronization of pulsed Tksapphire lasers and its application to difference frequency mixing for tunable infrared generation

A simple and effective technique for synchronizing two independent Ti: sapphire lasers was developed and used for difference-frequency generation. By control of pump intensity, buildup times of these lasers were adjusted to coincide for any combination of wavelengths that was needed for the production of a desired difference frequency. Synchronized pulses were mixed at a AgGaS(2) crystal, producing infrared pulses from 6.2 to 9.7 μm. Characteristic features of the method as well as its possible extension of the tuning range are discussed.     

Sudden death of adults in Japan

Epidemiological features, risk factors and preventive methods of sudden death (SD) derived from studies the authors have performed since 1987 together with colleagues in Niigata University School of Medicine were reviewed. When SD was defined as death occurring within 24 hours of the onset of symptoms, the annual incidence was 145/100,000 for people aged 15 years and older in Niigata Prefecture. The incidence increased sharply along with the advance of age, while the proportion of SD to natural death due to circulatory diseases was higher in younger people. Though diseases of the circulatory system made up approximately 90 percent of all causes of death, SD due to ischemic heart disease was less frequent in Japan than in western countries. SD showed various patterns in seasonal and "within-a-day" occurrences according to sex, age and cause of death. The months of the highest SD occurrence differed by occupation and matched the busiest work periods. A decrease in sleeping hours and mental stress experienced during the preceding week were related to the occurrence of both sudden death and non-fatal acute myocardial infarction. People having structural circulatory diseases were shown to be predisposed to SD when stress occurred, because fatal arrhythmia is easily induced by the above factors in such people. Health examinations were shown to have preventive effects, though limited, against SD. Differences in the resuscitated rates in cases where a witness was present and where one was not indicates that educating people about correct resuscitation methods is important to minimizing SD.     

Development of a stable localized visual inspection system for underwater structures

To avert potential crisis from Japan’s aging infrastructure and declining birth rate, the Japanese Government is planning to introduce robotic technology for the inspection of social infrastructure (such as pipes, dams, and bridges). Recording underwater positions is a difficult task for human divers who undertake conventional dam inspections. This study presents the Anchor Diver 5.2 system for efficient and effectual dam inspection. Anchor Diver 5.2 is based on an extended-tether-maneuvered remotely operated vehicle (ROV) equipped with cameras. The ROV is lowered into water by a hoist system from a boat and implements a visual survey of the concrete underwater structure. To improve the visibility of the ROV in murky and cloudy water, a novel concept named Water Loupe is proposed. In addition, a simple boat-fixing method is proposed to provide a stable base on the water surface, and the underwater position of the ROV, which cannot be accessed by global positioning systems, is recorded using a feasible localization method. Finally, the developed system was evaluated in field experiments conducted in the Amagase Dam, Japan, and its merits and problems are discussed.     

Single‐layered retardation films with negative wavelength dispersion birefringence made from liquid‐crystalline monomers

Organic light‐emitting diode displays have a cathode composed of a layer of highly reflective metal. Reflection of external light from this layer can be suppressed with a broadband quarter‐wave plate. Although various types of quarter‐wave plate retardation films have been prepared by copolymerizing, mixing, or laminating multiple polymers, ideal wavelength dispersion has not been achieved with thin retardation films because of their relatively low birefringence and the complexity of the procedure required manufacturing them. In this study, we developed (i) new liquid‐crystalline monomers with negative wavelength dispersion birefringence that we used to obtain thin, single‐layered retardation films suitable for coating and (ii) retardation films with different molecular alignments. We found that the monomers showed high solubility and high regularity of molecular alignment, with less damage to the substrate and alignment films. We also investigated the wavelength dispersion and thermal stability of the films. We succeeded in developing retardation films that had a homeotropic alignment or a hybrid alignment with negative wavelength dispersion. These alignments can be used to obtain antireflection films with an improved viewing angle for organic light‐emitting diode displays or next‐generation thin displays.     

Platform design for large-scale artificial market simulation and preliminary evaluation on the K computer

Artificial market simulations have the potential to be a strong tool for studying rapid and large market fluctuations and designing financial regulations. High-frequency traders, that exchange multiple assets simultaneously within a millisecond, are said to be a cause of rapid and large market fluctuations. For such a large-scale problem, this paper proposes a software or computing platform for large-scale and high-frequency artificial market simulations (Plham: /pl\(\Lambda\)m). The computing platform, Plham, enables modeling financial markets composed of various brands of assets and a large number of agents trading on a short timescale. The design feature of Plham is the separation of artificial market models (simulation models) from their execution (execution models). This allows users to define their simulation models without parallel computing expertise and to choose one of the execution models they need. This computing platform provides a prototype execution model for parallel simulations, which exploits the variety in trading frequency among traders, that is, the fact that some traders do not require up-to-date information of markets changing in millisecond order. We evaluated a prototype implementation on the K computer using up to 256 computing nodes.     

Gain-scheduled control via filtered scheduling parameters

Gain-scheduled control via LPV system models enjoys LMI-based synthesis methods and in particular parameter-dependent Lyapunov matrices have been employed to successfully reduce conservatism. Those controllers derived via parameter-dependent Lyapunov matrices, however, end up with depending on derivatives of scheduling parameters. Though this can be avoided by approximating derivatives or restricting Lyapunov matrices to be partly constant, the former loses guarantee of performance and stability and the latter can cause conservatism. This paper proposes a synthesis method of gain-scheduled controllers that depend on filtered scheduling parameters, instead of derivatives, with a concrete guarantee of a performance level. Moreover, it is shown that the performance level of conventional derivative-dependent gain-scheduled controllers is recovered with arbitrarily small errors.