Structural and morphological control of aligned nitrogen-doped carbon nanotubes

Nitrogen-doped carbon nanotubes (CN_x-NTs) were prepared using a floating catalyst chemical vapor deposition method. Melamine precursor was employed to effectively control nitrogen content within the CN_x-NTs and modulate their structure. X-ray photoelectron spectroscopy (XPS) analysis of the nitrogen bonding demonstrates the nitrogen-incorporation profile according to the precursor amount, which indicates the correlation between the nitrogen concentration and morphology of nanotubes. With the increase of melamine amount, the growth rate of nanotubes increases significantly, and the inner structure of CN_x-NTs displayed a regular morphology transition from straight and smooth walls (0 at.% nitrogen) to cone-stacked shapes or bamboo-like structure (1.5%), then to corrugated structures (3.1% and above). Both XPS and CHN group results indicate that the nitrogen concentration of CN_x-NTs remained almost constant even after exposing them to air for 5 months, revealing superior nitrogen stability in CNTs. Raman analysis shows that the intensity ratio of D to G bands (I_D/I_G) of nanotubes increases with the melamine amount and position of G-band undergoes a down-shift due to increasing nitrogen doping. The aligned CN_x-NTs with modulated morphology, controlled nitrogen concentration and superior stability may find potential applications in developing various nanodevices such as fuel cells and nanoenergetic functional components.     

Liquid and particles retention in foamed suspensions

This article describes a new strategy to modify the drainage behaviour of aqueous foams with solid nanoparticles. While for high particulate concentrations the liquid flow can be slowed down owing to viscosity effects, we show that much less concentrated systems, but possessing peculiar physicochemical properties, can also strongly modify the drainage behaviour. Taking advantage of the agglomerated state of pyrogenic silica in aqueous media, highly porous macro-particles are specifically prepared in the initial foaming solutions. It is shown that their typical size and their intrinsic yield-stress properties enable them to be captured by the bubbles during the foam generation stage and subsequently to be retained in the foam channels, according to a geometrical criterion based on the particle/bubble sizes ratio. The drainage curves of the foams display significant retention rates for the suspension during several hours, an effect that is enhanced for higher particles concentrations. This has been related to the high internal porosity and hydrophilic character of the macro-particles, acting as liquid-traps in the foam microstructure.     

Grain morphology of Cu damascene lines

The evolution of the grain structure through annealing of narrow damascene Cu interconnects is important for any further design of highly integrated circuits. Here we present a comprehensive transmission electron microscopy study of damascene lines between 80 nm and 3000 nm wide. Experimental results clearly indicate that morphology evolutions through annealing are strongly influenced by the line width. If the lines are wider than 250 nm a strong connection between the grain structure within the lines and the overburden copper is present at least after sufficient annealing. Once the lines are as small as 80 nm the grain structure within the lines are only weakly connected to the overburden copper grown above.     

Modeling nitrate fluxes at the catchment scale using the integrated tool CAWAQS

Nitrates fluxes in the Grand Morin basin (1200 km(2)), that is subjected to intense agricultural pressure, are considered using in-stream observations (around 250 sampling days over 5 years) and physically based simulations using the CAWAQS model (CAtchment WAter Quality Simulator). In-stream nitrate concentration averaged 6 mg N L(-1), increasing by approximately 0.2 mg N L(-1) yr(-1) around this value (period 1991-1996). Our results show that, over the period of 1991-1996, the differences between in-stream observed nitrate concentrations and simulated nitrate concentrations result from nitrate losses at the basin scale. These losses are due to denitrification by transfer through wetlands, alluvial plains, the hyporheic zone, and by benthic processes in rivers. A mean annual mass balance at the basin scale indicates that 40% of the infiltration flux (3360 kg N km(-2) yr(-1)) is removed from the system via the river network, 40% is stored in aquifers and 20% is lost by denitrification (period 1991-1996).     

Bioactivity modulation of Bioglass® powder by thermal treatment

A discussion of the effects of Bioglass^® powder crystallisation on the in vitro bioactivity in simulated body fluid (SBF) is presented.Starting from Bioglass^® powder, different glass–ceramics were obtained by thermal treatments between 580 °C and 800 °C, with variable crystallisation content (from 10 to 92 wt%). All samples (glass and glass–ceramics) showed apatite formation at their surface when immersed in SBF. In case of the glass and the samples with lowest crystallinity, the first step of apatite formation involved a homogenous dissolution followed by an amorphous calcium phosphate (CaP) layer precipitation. For the samples with a high crystallisation content, heterogeneous dissolution occurred. For the first time, the Stevels number of the amorphous phase is used to explain the possible dissolution of the crystalline phase present in materials with a similar chemical composition of the Bioglass^®. All samples presented at 21 days of immersion in SBF B-type hydroxycarbonate apatite crystals.     

Identification of asymmetric constitutive laws at high temperature based on Digital Image Correlation

The mechanical characterization of ceramics can be very challenging. Depending on their composition and fabrication process, ceramic materials may exhibit at room temperature different types of mechanical behaviours, ranging from linear elastic to quasi-brittle, like rocks, concrete or plasters. At elevated temperature, they may present a non-linear behaviour, due for instance to the presence of a vitreous phase. However, estimating the evolution of their behaviour from room temperature to elevated temperature is a challenging topic, especially when there is an asymmetry between tension and compression. A methodology based on Digital Image Correlation is presented in this paper where four point bending tests are analysed for temperatures ranging from 25 °C to 900 °C. For a ceramic mainly made of aluminium titanate, the evolution of an asymmetric constitutive law is identified with a strong link with microstructural observations using SEM images.     

A general procedure for the design of bulk acoustic wave filters

This article presents a procedure for the design of bulk acoustic wave (BAW) filters. The procedure consists of optimizing the modified Butterworth‐Van Dyke model of each resonator, considering appropriate technological parameters. The approach is demonstrated first to design a classical aluminum nitride‐based BAW filter but remains valid for other piezoelectric layers, considering either longitudinal or transverse acoustic wave coupling. The approach is finally applied to the design of a lithium niobate (LiNbO₃) BAW filter for wide‐band filtering applications. © 2011 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2011.     

LC/ESI-MS/MS characterisation of procyanidins and propelargonidins responsible for the strong antioxidant activity of the edible halophyte Mesembryanthemum edule L.

Mesembryanthemum edule is used as a food ingredient and in traditional medicine. In this study, we investigated antioxidant activities of several extracts (methanol/acidified water, v/v: 20/80; 40/60 and 60/40) obtained from M. edule leaf, stem and root. Then, individual phenolics were characterised by reverse-phase HPLC coupled to electrospray ionisation mass spectrometry and multi-stage MS fragment analysis. Results showed that 40% methanol leaf extract, 40% methanol root extract and 20% methanol stem extract displayed the highest scavenging activity against DPPH and ABTS radicals. Regarding LC/ESI-MS/MS identification of active phenols, there were significant differences among the fractions of interest. In fact, 40% leaf extract mainly contained procyanidins, whereas propelargonidins were the major phenolics in 20% methanol stem extract, while, in 40% root extract, the active compounds remained unidentified. These results indicate that edible M. edule can be used as a nutraceutical in the pharmaceutical industry.     

A critical approach to viscosity index

The viscosity index (VI) is a useful tool for lubricant users and refiners, since it is a measure of the effect of temperature changes on the viscosity of the oil. However, it was found that the viscosity index does not correlate with the flow activation energy E_a, which is the theoretically defined dependence of the viscosity on temperature. In this way, two oils may have the same flow activation energy but a viscosity index varying by up to 120. We therefore believe that the VI does not always give a proper representation of the effect of temperature on the kinematic viscosity.¹³C NMR spectroscopy was used to identify the molecules with a high VI. Twenty different oil samples produced from eight different vacuum gas oils with viscosity indices ranging from −104 to 146 were analyzed and key parameters identified for high VI molecules: long alkyl chains, methyl branching in the centre of the molecule, low content of aromatic compounds, no ethyl branching and no tertiary carbons.A correlation based on four selected peaks was developed, giving a very good prediction of the viscosity index.