Correlation of burst pressure of GRP cylinders with the stress wave factor

Glass fibre-reinforced plastic (GRP) cylinders are increasingly used for highly stressed structural elements. The higher the demands on the materials, the higher are the fault detection requirements to be met by non-destructive materials testing methods. Acousto-ultrasonics is a valuable aid for the non-destructive evaluation of GRP composite materials, because it may be the answer to evaluating effects of subtle defects in composites. The aim of the research is to evaluate the burst pressure of GRP cylinders by acousto-ultrasonics techniques. The theoretical results have been found to be in good agreement with the experimental values. Hence the results strongly suggest that stress wave factor measurements can be exploited successfully to predict burst pressure of GRP cylinders.Nomenclature P Internal pressure, kgf cm^–2 - d Internal diameter, cm - t Thickness of cylinder, cm - (N ,N ,N ) Resultant forces, kgf - (M ,M ,M ) Moments, kg cm - [A] Extensional stiffness matrix - [B] Bending stretching coupling matrix - [D] Flexural stiffness matrix - ( ⁰ , ⁰ , ⁰ ) Midplane strains - (k ,k ,k ) Curvatures - n Number of laminae - Z Distance from midplane, cm - _u Ultimate tensile strength of GRP composite, kg cm^–2 - S _W Stress wave factor - m Material parameter - Filament winding angle     

Effect of laser irradiation on the electrical properties of amorphous germanium films

Amorphous films of germanium were grown using a vacuum evaporation technique, on glass substrates kept at room temperature. As-grown films were irradiated with Q-Switched Nd-YAG laser pulses (=1.06 m, 20nsec, 10 to 50Jcm^–2). The d.c. conductivity measurements were made in the temperature range 77 to 300 K. It was observed that the effect of laser irradiation was similar to the effect caused by the thermal annealing of the films. The d.c. conductivity data were analysed in the light of Mott's theory of a variable range hopping conduction process.     

Barium ferrite: Preparation by liquid mix technique and its characterization

Barium ferrite has been prepared by a novel non-conventional preparation method known as the liquid mix technique which involves the preparation of citrates of the metals concerned. The decomposition of the citrates indicated a gradual transition from an amorphous material to a crystalline phase leading to the formation of barium ferrite at 600° C as indicated by the X-ray diffraction and Mössbauer measurements. Submicrometre-sized particles of the ferrite could be obtained directly on decomposition of the citrates, thus avoiding the milling or grinding operations normally employed to reduce the particles to the size required for obtaining good magnetic properties. The best properties (coercivity and remanence) were obtained for the ferrite sintered around 990° C.     

On the synthesis and characterization of a new manganite type CMR material: La0.7Hg0.3MnO3

A new manganite type CMR material, La_0.7Hg_0.3MnO₃ has been successfully synthesized and has been found to exhibit magnetoresistance (≈9%) at low fields (≈1.5 kG). The synthesis has been carried out through a solid state reaction route consisting of the formation of La_0.7MnO₃ followed by diffusion of Hg leading to La_0.7Hg_0.3MnO₃. The as grown samples are polycrystalline and correspond to an orthorhombic unit cell with the lattice parameters; a=5.5183 Å, b=5.6383 Å and c=7.5368 Å. The typical grain size as revealed by scanning electron microscopy is in the range of 0.5–2 μm. The ρ–T behaviour shows a peak at T_IM=227 K. The ρ–T behaviour above this temperature corresponds to that of an insulator and below this to that of a metal. The ρ–T behaviour remains unaltered when a magnetic field (H_dc=1.5 kG) is applied. However, with this magnetic field a drop in the resistivity is observed up to 77 K. At room temperature the magnetoresistance ratio (MRR) is too small but it steadily increases as the temperature is decreased. Thus, MRRs at 227.13 and 77 K are 3.41 and 9.05%, respectively, in an applied field of H_dc=1.5 kG. At a given temperature the variation in MRR with field H_dc is rapid at lower field values (H_dc<1.2 kG) and scales linearly for higher field values (H_dc>1.2 kG). It may be mentioned that the present work on the synthesis and magnetoresistance behaviour of La_0.7Hg_0.3MnO₃, is the first of its type.     

Hydrogen Sulfide Metabolite,Sodium Thiosulfate: Clinical Applications and Underlying Molecular Mechanisms

Thiosulfate in the form of sodium thiosulfate (STS) is a major oxidation product of hydrogen sulfide (H₂S), an endogenous signaling molecule and the third member of the gasotransmitter family. STS is currently used in the clinical treatment of acute cyanide poisoning, cisplatin toxicities in cancer therapy, and calciphylaxis in dialysis patients. Burgeoning evidence show that STS has antioxidant and anti-inflammatory properties, making it a potential therapeutic candidate molecule that can target multiple molecular pathways in various diseases and drug-induced toxicities. This review discusses the biochemical and molecular pathways in the generation of STS from H₂S, its clinical usefulness, and potential clinical applications, as well as the molecular mechanisms underlying these clinical applications and a future perspective in kidney transplantation.     

Ionic liquid mediated nano-composite polymer gel electrolyte for rechargeable battery application

ABSTRACT

Nano-composite polymer gel electrolytes (NPGEs) based on polymer poly(vinylidene fluoride-co-hexafluoropropylene) PVdF-HFP, ionic liquid, 1-butyl-3- methylimidazolium bis(trifluoromethanesulfonyl)imide BMIMTFSI, Li-salt along with the addition of SiO₂ nanoparticles have been synthesized and characterized by various techniques. Prepared NPGEs show high room temperature ionic conductivity (~10^?3 S/cm) and have a wide electrochemical window (ECW) (~3.3–3.5 V). The galvanostatic charge/discharge profile was studied by sandwiching best performing NPGEs between a LiFePO₄ cathode and lithium metal anode. The specific discharge capacity of the cell (Li/NPGE/LiFePO₄) room temperature at 0.1C rate is found to be 138 mAh/g.     

Quantification of response time in poly(vinyl alcohol)–metal complex thermochromic polymeric systems

Thermochromic poly(vinyl alcohol) (PVA)‐based material was synthesized and an extensive study of its thermochromic behavior with respect to response time was carried out. It was observed that it is possible to manipulate the response time by keeping control over chemical and physical parameters. The response time, which is the most important property of a smart material, has in this case been found to be very much influenced by rate of heat transfer into the material. Different compositions of the thermochromic material and their corresponding response time with respect to rate of heat transfer were studied and correlated. First, a theoretical equation was derived and later on it was experimentally verified to quantify the response time in PVA–metal complex‐based thermochromic systems. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4832–4834, 2006     

Attention allocation for decision making queues

We consider the optimal servicing of a queue with sigmoid server performance. There are various systems with sigmoid server performance, including systems involving human decision making, visual perception, human–machine communication and advertising response. Tasks arrive at the server according to a Poisson process. Each task has a deadline that is incorporated as a latency penalty. We investigate the trade-off between the reward obtained by processing the current task and the penalty incurred due to the tasks waiting in the queue. We study this optimization problem in a Markov decision process (MDP) framework. We characterize the properties of the optimal policy for the MDP and show that the optimal policy may drop some tasks; that is, may not process a task at all. We determine an approximate solution to the MDP using the certainty-equivalent receding horizon optimization framework and derive performance bounds on the proposed receding horizon policy. We also suggest guidelines for the design of such queues.     

Rubber–clay nanocomposite by solution blending

Ethylene vinyl acetate rubber (45% vinyl acetate content, EVA‐45) and organomodified clay (12Me‐MMT) composites were prepared by solution blending of the rubber and the clay. A combination of X‐ray diffraction, scanning electron microscopy, and transmission electron microscopy studies showed that the composites obtained are on the nanometer scale. The measurements of the dynamic mechanical properties for different compositions over a temperature range (?100 to +100°C) showed that the storage moduli of these rubber–clay nanocomposites are higher above the glass to rubber transition temperature compared to the neat rubber. The tensile strength of the nanocomposites is about 1.6 times higher than that of the EVA‐45. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 2216–2220, 2003     

Influence of variables in nickel-manganese-zinc alloy plating from a sulphate bath

An Ni-Mn-Zn alloy has been satisfactorily electrodeposited from a sulphate bath containing nickel sulphate (20–23 g dm⁻³), manganese sulphate (76–88 g dm⁻³), zinc sulphate (18–24 g dm⁻³), ammonium sulphate (30 g dm⁻³), thiourea (18g dm⁻³) and ascorbic acid (0.8 g dm⁻³) under various plating conditions, namely, current density 1.0–3.0 A dm⁻²; temperature 30–45° C; pH 2.7–4.2 and duration of electrolysis 15–30 min. Semibright, blackish-grey, thin films were generally deposited with the proportion of nickel and manganese in the deposits increasing with increasing current density, temperature and duration of electrolysis. However, the amount of zinc increased as the pH of the solution was raised. The cathode efficiency for alloy deposition increased linearly as the temperature or the pH of the solution was decreased, whereas at any particular pH and temperature it continuously rose with increasing current density or the time of deposition. The cathode polarization shifted to more negative values on increasing the current density and to less negative values at higher pH values and temperatures which consequently lowered the throwing power under the latter conditions.