Utilization of waste loquat (Eriobotrya Japonica Lindley) kernels as substrate for scleroglucan production by locally isolated Sclerotium rolfsii

Present study mainly focused on investigating the feasibility of waste loquat kernels as substrate in submerged culture of Sclerotium rolfsii MT-6 for scleroglucan production. Loquat kernel contained high protein (22.5%) and total carbohydrate (71.2%) contents. Dried and powdered kernels were subjected to acid hydrolysis with 2 N HCl. The obtained hydrolysate was used for the preparation of loquat kernel extract (LKE) and detoxified loquat kernel extract (DLKE). S. rolfsii MT-6 was isolated from fermented squash (Cucurbita pepo). Optimal conditions for scleroglucan production were initial pH 5.0, shaking speed 150 rpm, 28°C, and cultivation time of 72 hr. Production media prepared with DLKE or LKE gave maximum biomass concentrations of 17.06 and 16.21 g/L, and maximum scleroglucan concentrations of 12.08 and 10.53 g/L, respectively. DLKE was also favorable substrate for mycelial growth in a uniform pellet form. This is a first report on the application of waste loquat kernels as scleroglucan production substrate and on the use of a local S. rolfsii isolate for this purpose.     

Removal of basic dyes from aqueous solutions by crosslinked‐acrylic acid/acrylamidopropane sulfonic acid hydrogels

In this study, Acrylic acid (AA)/2‐acrylamido‐2‐methlypropane sulfonic acid (AMPS) hydrogels were prepared by free radical polymerization in aqueous solutions of AA, AMPS, and N,N‐methylenebisacrylamide (NMBA) as crosslinker. Potassium persulfate (PPS)/potassium bisulfide (PBS) were used as initiator and accelerator pair. The water absorption capacities and dye adsorption properties of the hydrogels were investigated. Adsorption properties of the hydrogels were evaluated by depending on different adsorption conditions such as different initial dye concentration and contact time. The concentrations of the dyes were determined using UV/Vis Spectrophotometer at wavelength 530 nm for safranine T (ST) and 622 nm for brilliant cresyl blue (BCB). Adsorption kinetic studies showed that pseudo‐first order kinetic model is suitable to explain the adsorption kinetic data of the hydrogels. Langmuir and Freundlich isotherm models were used to describe adsorption data. The result revealed that the adsorption of basic dyes onto hydrogels fit very well both Langmuir and Freundlich isotherms. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Post-buckling behavior of carbon fiber epoxy composite plates

In this study, the pre-buckling and post-buckling behaviors of layered composite plates which were made of woven carbon fiber fabric with a circular hole in the middle were investigated experimentally and numerically. Firstly, load-displacement graphs of composite plates with different hole diameters were experimentally obtained under compressive load. Then the numerical load-displacement graphs of the plates were found with the ANSYS package program which used the finite element method. As a result, after linear buckling experimental and numerical results were found to be compatible with each other. In addition, damage behavior of plates after buckling with the aid of Tsai-Wu damage criterion was obtained similar to experimental results. The increase in hole diameter did not change the load-displacement behavior characteristics of the plates after buckling. However, it has reduced maximum damage load and maximum failure displacement. The stress at the perimeter of the hole increased significantly with the increase of the vertical displacement with immediately after the buckling but later was not significantly affected by this increase.

     

Three-parameter (3P) weibull distribution for characterization of strength of ceramics showing R-Curve behavior

Strength distribution of advanced ceramics is commonly characterized by two-Parameter (2P) Weibull distribution. However, deviation of strength distribution from 2P-Weibull distribution may occur in ceramics due to various mechanisms. R-curve behavior is one of these mechanisms where increase of fracture resistance with the extension of crack occurs. In such cases, 2P-Weibull distribution may not be the best fitting distribution function based on the goodness-of-fitness tests. This article examines the effectiveness of three-parameter (3P) Weibull distribution function for fitting the strength variation due to R-curve effect by using experimental and virtual strength data. The effect of Weibull parameters, degree of increase in crack resistance and number of samples on effectiveness of fitting via 3P-Weibull distribution is investigated. It is reported that 3P-Weibull distribution function fits the strength distribution better than 2P-Weibull distribution function for materials showing R-curve behavior when the crack resistance curve is steep and Weibull modulus is high. Furthermore, it is shown that at least 100 samples should be used for a reliable estimate when the material exhibits R-curve behavior.     

An efficient soft demapper for APSK signals using extreme learning machine

Neural Computing and Applications - In this paper we introduce an efficient soft demapping method for amplitude phase shift keying (APSK) constellations using extreme learning machine (ELM). The...     

Caregivers’ attitudes toward potential robot coworkers in elder care

Technological advances in robotics increase progressively. Elder care is one of the work areas which have potential to involve robotic workforce. So, it is important to focus on interaction between humans and potential robot workers to prepare the organization for possible challenges. The current study examined the relationships between trust in robots and anthropomorphism of robots, intention to work with robots and preference of automation levels. For this purpose, 102 caregivers who work for elder care in a nursing home (aged between 19 and 40) participated in an experimental study. According to the results, anthropomorphism of robots did not make any difference in terms of trust in them. Trust in robots was significantly related to intention to work and preference of automation levels. Organizations may consider employees’ trust in robots as an important factor before adapting them to workplace area.

     

Synthesis of Various Calix[4]arene Derivatives with Mercaptoalkyl Chains and Their Application in Removing Cr(VI) from Aqueous Solution

Four different mercaptoalkyl-substituted calixarene derivatives (5,11,17,23-tetra-tert-butyl-25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxycalix[4]arene, 25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxycalix[4]arene, 25,27-bis(5-mercaptopentanoxyl)-26,28-dihydroxycalix[4]arene and 5,17-di-tert-butyl-11,23-di-carboxyl-26,28-bis(3-mercaptopropoxyl)-25,27-di-hydroxycalix[4]arene) were synthesized. Their structures were characterized by Fourier transform infrared spectroscopy (FTIR), ¹H and ¹³C NMR spectroscopy, and elemental analysis techniques. Moreover, their extraction capabilities at different parameters such as pH, shaking speed, and shaking time were examined toward dichromate ions. Results implied that all mercaptoalkyl-substituted calixarene derivatives showed an extraction capability toward dichromate anion while the carboxyl-functionalized calixarene-marcapto-alkyl derivative exhibited the highest extraction capability.     

Utilization of Catalytic Properties of the Encapsulated Lipase with Calix[4]arene-Adorned Sporopollenin

The dihydrazide calix[4]arene was immobilized onto sporopollenin in order to encapsulate Candida rugosa lipase (CRL) via sol-gel entrapment. The kinetic resolution of the new encapsulated lipase was investigated for enantioselective hydrolysis of racemic naproxen methyl ester and 2-phenoxypropionic acid methyl ester. The results demonstrated that the activity and enantioselectivity of the lipase were improved when the lipase was encapsulated in the presence of calix[4]arene-immobilized sporopollenin. The encapsulated lipase showed an excellent rate of enantioselectivity against the (R/S)-naproxen methyl and (R/S)-2-phenoxypropionic acid methyl esters, with E = 350 and 295, respectively, compared to the free enzyme.