Preparation of multi-compositional gas sensing films by combinatorial solution deposition

Various compositions of gas sensing films were prepared by the combinatorial deposition of SnO₂, ZnO, and WO₃ sol solutions and their gas sensing behaviors were investigated. The film composition could be manipulated conveniently via the alternate dropping of different oxide sol solutions. From the correlation between film compositions and gas sensitivities, the selective detection of C₂H₅OH and CH₃COCH₃ in the presence of CO, C₃H₈, H₂, and NO₂ could be attained. In addition, the discrimination between C₂H₅OH and CH₃COCH₃, which is a challenging issue due to their similar chemical nature, becomes possible. This research demonstrates the precise design of the sensor-material composition for the selective gas detection via the combinatorial approach.     

Revisiting the need for formal education in visualization.

Defining visualization education is still a work in progress. Visualization education is not just a subject within computer science. Computer scientists are not always the appropriate choice to teach visualization courses on their own. Visualization is not just mastering a set of concepts but acquiring skills. Student should learn by doing, either using one tool or a variety of tools, depending on the course's focus.     

Model development for multicomponent mass transfer with rapid chemical reactions in a small drop

Multicomponent mass transfer accompanied by instantaneous chemical reactions in a small drop has been modeled and simulated for the case where two different solutes diffuse from a continuous phase into the drop and react rapidly with a third reactant in the drop. The computational results obtained by Galerkin’s finite element method are reported in terms of concentration profiles, the locations of reaction front, the cumulative mass flux, and the enhancement factor. The effects of physical parameters, such as diffusivities of the solutes and the reactant, the interfacial concentration of solutes, and the relative amount of the reactant, on the calculated quantities are discussed.     

Characterization of the cavity nucleation factor for life prediction under creep-fatigue interaction

It is understood that grain boundary cavitation is one of the detrimental processes for the degradation of materials that reduces the creep-fatigue life at high temperatures. In a previous investigation, a model for life prediction under creep-fatigue conditions was proposed in terms of cavity nucleation and growth. In that model, the cavity nucleation factor (P) was introduced to correlate between the number of cavities and the plastic strain range from which athermal vacancies are generated. It was considered to be a material specific constant which was independent of the experimental conditions. However, in this study, it is found that the cavity nucleation factor is a function of the plastic strain range but is independent of the testing temperature at near 0.5 T _m. In the light of this dependency, a new cavity nucleation factor (P'), is introduced. Using this new cavity nucleation factor (P'), a modified equation for life prediction is proposed, and it is shown that there is good agreement between predicted and experimental lives. Additionally, an interesting approach has been made to find the physical meaning of the new cavity nucleation factor (P'). According to this study, it is suggested that the new cavity nucleation factor, which is regarded as a material specific constant, is found to be strongly related to the density of the grain boundary precipitates with a linear relationship existing between them.     

Photocatalytic degradation of methyl orange using heteropolytungstic acid-encapsulated TiSBA-15

Heteropolyphosphotungstic acid (H₃PW₁₂O₄₀) (HPA)-encapsulated titanium-supported SBA15 nanoporous materials (HPA-TiSBA-15) were synthesized as a new photocatalyst, and they were characterized by FT-IR and ³¹P NMR MAS spectroscopic methods. Their photocatalytic effects on degradation of methyl orange in water were investigated under natural conditions, and it was found that a 4-fold increase in the photodegradation rate is observed in the presence of HPA-TiSBA-15 as compared to the rate observed in the presence of titanium-supported SBA15 nanoporous materials (TiSBA-15) without HPA.     

Category Norms as a Function of Culture and Age: Comparisons of Item Responses to 105 Categories by American and Chinese Adults.

Understanding how aging influences cognition across different cultures has been hindered by a lack of standardized, cross-referenced verbal stimuli. This study introduces a database of such item-level stimuli for both younger and older adults, in China and the United States, and makes 3 distinct contributions. First, the authors specify which item categories generalize across age and/or cultural groups, rigorously quantifying differences among them. Second, they introduce novel, powerful methods to measure between-group differences in freely generated ranked data, the rank-ordered logit model and Hellinger Affinity. Finally, a broad archive of tested, cross-linguistic stimuli is now freely available to researchers: data, similarity measures, and all stimulus materials for 105 categories and 4 culture-by-age groups, comprising over 10,000 fully translated unique item responses. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

An Area Optimization Method for Digital Filter Design

In this paper, we propose an efficient design method for area optimization in a digital filter. The conventional methods to reduce the number of adders in a filter have the problem of a long critical path delay caused by the deep logic depth of the filter due to adder sharing. Furthermore, there is such a disadvantage that they use the transposed direct form (TDF) filter which needs more registers than those of the direct form (DF) filter. In this paper, we present a hybrid structure of a TDF and DF based on the flattened coefficients method so that it can reduce the number of flip‐flops and full‐adders without additional critical path delay. We also propose a resource sharing method and sharing‐pattern searching algorithm to reduce the number of adders without deepening the logic depth. Simulation results show that the proposed structure can save the number of adders and registers by 22 and 26%, respectively, compared to the best one used in the past.     

Surface structural change of ZnO-coated LiNi0.5Mn1.5O4 spinel as 5 V cathode materials at elevated temperatures

LiNi_0.5Mn_1.5O₄ powder was synthesized via sol-gel method and coated with ZnO in order to test the electrochemical cyclability of the material as a cathode for the secondary Li battery in the 5 V range at 55 °C. The ZnO-coated LiNi_0.5Mn_1.5O₄ powder nearly maintained its initial capacity of 137 mA h g⁻¹ after 50 cycles whereas the uncoated powder was able to retain no more than 10% of the initial capacity after 30 cycles. TEM analysis of the cycled cathodes suggests that the formation of the graphitic surface phase, hindering the Li migration, may be responsible for the rapid capacity loss of the uncoated material while no such phase was observed on the surface of the ZnO coated LiNi_0.5Mn_1.5O₄ powder.     

Conducting polymers at low temperatures and high magnetic fields

Advances in the synthesis of organic conducting polymer systems has increased the electrical conductivity of these systems by several orders of magnitude in the last decade. Several practical applications are envisioned for such systems, but a thorough understanding of the conduction mechanisms and identification of the charge carriers is lacking, making design and implementation for bulk synthesis difficult. In order to clarify our understanding of the electrical properties of these systems, the resistivity and magnetoresistivity of various polymers doped near the metal - insulator transition, such as polyaniline protonated by camphor sulfonic acid (PANi-CSA) and polypyrrole doped with PF₆ (PPy-PF₆), have been studied down to 25 mK in magnetic fields up to 16 T.