Improving of Micro Porous Layer based on Advanced Carbon Materials for High Temperature Proton Exchange Membrane Fuel Cell Electrodes

This work reports the study of four different carbon materials for their application as carbon material in microporous layers for high temperature proton exchange membrane fuel cells electrodes. The microporous layers were prepared with carbon black (a commercial one, Vulcan XC72), two different carbon nanofibers, CNF, (Ribbon and Platelet structure) and carbon nanospheres, all of them prepared in our lab. The microporous layers were characterized by XRD. The hydrophobicity, electrical conductivity, and permeability to different gases were also evaluated. The stability is an important issue to be overcome in the field of proton exchange membrane fuel cells. Thus, accelerated thermal and electrochemical degradation tests in phosphoric acid media were carried out to evaluate the stability of the different advanced materials tested under the same conditions. From all the performed essays, the carbon nanospheres were the best nano‐carbon materials because of the lower degradation degree shown by the microporous layer prepared with them and the good conductivity and permeability achieved, whereas CNF with a Platelet structure showed a low electrochemical stability due to their greater edge plane exposure which favors their corrosion.     

Asymmetric bihomologous crosslinkers for bicomponent gels—The way to strongly increased elastic moduli

2‐Hydroxyethylmethacrylate (HEMA) and acrylamide (AA) have been copolymerized via free radical mechanism, in the presence of 5 mol % of four different crosslinker systems, the symmetric ethylenglycoldimethacrylate (EGDMA), bisacrylamide (BIS), a mixture of EGDMA and BIS, and the asymmetric acrylamideethylenmethacrylate (METAA). The polymerizations have been monitored with a rheometer, exhibiting the gel obtained with the asymmetric METAA, an elastic modulus that is dramatically increased compared with those of the gels prepared with the other three crosslinker systems. A kinetic analysis using the terminal model has been used to build probabilistic surfaces that give information about how the crosslinker is incorporated into the network. This analysis shows a high dissimilarity between the reactions using the asymmetric and the mixture of symmetric crosslinkers, what has been correlated to the difference in modulus. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis of polar vinyl monomer–olefin copolymers by α‐diimine nickel catalyst

Vinyl acetate, methyl methacrylate, acrylonitrile and methyl vinyl ketone were investigated for co‐ and terpolymerization with ethylene and ethylene–propylene. Precursor [bis(N,N ′‐dimesitylimino)acenaphthene]dibromonickel, activated by methylaluminoxane was used as a catalyst system and trialkylaluminium was employed to block the polar groups for these polymerizations. Polymerization activities of the order of magnitude of 10⁶ in the case of vinyl acetate and methyl methacrylate, and 10⁵ in the case of acrylonitrile were achieved. Microanalysis and GPC of acrylonitrile copolymers found about 17 units of acrylonitrile per polymer chain. Copolymers with very different properties from the parent homopolymers were obtained in all cases except that of methyl vinyl ketone. © 2001 Society of Chemical Industry     

Analysis of sensitization phenomenon in friction stir welded 304 stainless steel

This study evaluates the degree of sensitization (DOS) of 304 stainless steel joined by friction stir welding (FSW). Single-loop electrochemical potentiokinetic reactivation tests were performed using a 0.5 mol/L H₂SO₄ + 0.01 mol/L KSCN solution. Sensitization was promoted by exposition of the stainless steel at temperatures between 400°C and 850°C. The microstructure was characterized using optical microscopy to identify the weld zone and the base metal. The samples treated at 550°C showed the most severe intergranular corrosion. The DOS was lower in the weld zone than in the base metal after heat treatments. This reduction in the DOS for the weld zone indicates that FSW is a beneficial process in joining stainless steel.     

A multidimensional segmentation evaluation for medical image data

Evaluation of segmentation methods is a crucial aspect in image processing, especially in the medical imaging field, where small differences between segmented regions in the anatomy can be of paramount importance. Usually, segmentation evaluation is based on a measure that depends on the number of segmented voxels inside and outside of some reference regions that are called gold standards. Although some other measures have been also used, in this work we propose a set of new similarity measures, based on different features, such as the location and intensity values of the misclassified voxels, and the connectivity and the boundaries of the segmented data. Using the multidimensional information provided by these measures, we propose a new evaluation method whose results are visualized applying a Principal Component Analysis of the data, obtaining a simplified graphical method to compare different segmentation results. We have carried out an intensive study using several classic segmentation methods applied to a set of MRI simulated data of the brain with several noise and RF inhomogeneity levels, and also to real data, showing that the new measures proposed here and the results that we have obtained from the multidimensional evaluation, improve the robustness of the evaluation and provides better understanding about the difference between segmentation methods.     

Screening,optimization and kinetics of Jatropha curcas oil transesterification with heterogeneous catalysts

This work investigates the production of fatty acid methyl esters (FAME) from Jatropha curcas oil using a variety of heterogeneous catalysts: resins, zeolites, clays, hydrotalcites, aluminas and niobium oxide. For this purpose, a catalyst screening was first conducted in a batch reactor at the following operating conditions: oil to methanol molar ratio of 1:9, 6 h of reaction, 5 wt% catalyst, at 333 and 393 K. From the screening step, KSF clay and Amberlyst 15 catalysts were selected to carry out a 2³ full factorial central composite rotatable design so as to elucidate the effects of process variables on FAME yield. The optimum reaction conditions for both catalysts were found to be oil to methanol molar ratio of 1:12, 5 wt% of catalyst, 433 K and 6 h of reaction with a FAME yield of about 70 wt%. A kinetic study was then experimentally performed and a semi-empirical model was built to represent the experimental data. Finally, catalyst re-utilization in five successive batch experiments was evaluated at the optimized conditions.     

Operation of a horizontal subsurface flow constructed wetland – Microbial fuel cell treating wastewater under different organic loading rates

The aim of the present work is to determine whether a horizontal subsurface flow constructed wetland treating wastewater could act simultaneously as a microbial fuel cell (MFC). Specifically, and as the main variable under study, different organic loading rates were used, and the response of the system was monitored. The installation consisted of a synthetic domestic wastewater-feeding system and a pilot-scale constructed wetland for wastewater treatment, which also included coupled devices necessary to function as an MFC. The wetland worked under continuous operation for 180 d, treating three types of synthetic wastewater with increasing organic loading rates: 13.9 g COD m⁻² d⁻¹, 31.1 g COD m⁻² d⁻¹, and 61.1 g COD m⁻² d⁻¹. The COD removal efficiencies and the cell voltage generation were continuously monitored. The wetland worked simultaneously as an MFC generating electric power. Under low organic loading rates, the wastewater organic matter was completely oxidised in the lower anaerobic compartment, and there were slight aerobic conditions in the upper cathodic compartment, thus causing an electrical current. Under high organic loading rates, the organic matter could not be completely oxidised in the anodic compartment and flowed to the cathodic one, which entered into anaerobic conditions and caused the MFC to stop working. The system developed in this work offered similar cell voltage, power density, and current density values compared with the ones obtained in previous studies using photosynthetic MFCs, sediment-type MFCs, and plant-type MFCs. The light/darkness changes caused voltage fluctuations due to the photosynthetic activity of the macrophytes used (Phragmites australis), which affected the conditions in the cathodic compartment.     

Use of a new milk-clotting protease from Thermomucor indicae-seudaticae N31 as coagulant and changes during ripening of Prato cheese

Prato cheeses were manufactured using coagulant from Thermomucor indicae-seudaticae N31 or a commercial coagulant. Cheeses were characterised using the following analysis: yield; fat; acidity; moisture; ash; salt; pH; total nitrogen; total protein; NS-pH 4.6/NT*100; NS-TCA 12%/NT*100; casein electrophoresis; and RP-HPLC. The results were statistically analysed and revealed that the proteolytic indices were not significantly different throughout the 60 days of ripening of cheeses made with either coagulant. Even though there were some quantitative differences in the peptide profile of cheeses, the enzyme from T. indicae-seudaticae N31 was used in the production of good quality Prato cheese without having to change the established technological parameters of the process.