Distribution of the lifetime of consecutive k-within-m-out-of-n:F systems

The distribution of the lifetime (MTTF) of any consecutive k -within-m-out-of-n:F system, with independent exponentially distributed component lifetimes, is shown to be a convex combination of the distributions (MTTFs) of several convolutions of independent random variables, where each convolution represents a distinct path in the evolution of the system's history, and where in each convolution all but the last random variable is exponential. The last random variable in each convolution is either a zero lifetime or the lifetime of several disjoint consecutive k_i within m_i-out-of-n:F systems in series with each k_i<k, each m_i<m, and each n_i<n. This enables the calculations to proceed recursively. Calculations are facilitated by the symmetric nature of the convex combination     

Creep deformation of induction pressure welded 2·25Cr-1Mo steel

In this paper, experimental results involving the effect of stress and temperature on creep behaviour of induction pressure welded (IPW) 2·25Cr-1Mo steel are presented. Creep rupture tests were conducted at 550–700°C in steps of 50°C over a stress range of 112·5–180 MPa. Above 650°C failure of the specimen was enhanced due to the microstructural instability. Failure in the specimens occurred invariably in the heat affected zones (HAZ), and the fracture surfaces indicated ductile failure.     

A bi-criteria model for the inventory aggregation problem under risk pooling

Inventory aggregation, also called Risk Pooling, is one of the most efficient ways to reduce the level of safety stocks thereby reducing inventory across the supply chain. Determining the best level of aggregation is a difficult problem and needs extensive study of all the possible scenarios that can affect this decision. Minimizing costs in a supply chain is no longer the sole priority of businesses. Maintaining a high level of responsiveness is also considered equally important. The conflicting nature of these two criteria makes the solution of the problem difficult. In this paper, we develop a bi-criteria nonlinear stochastic integer programming model to determine the best supply chain distribution network to meet customer demands, where minimizing costs while maintaining high levels of responsiveness is important. We develop a two-stage optimization algorithm to solve this problem.     

DARYN-a distributed decision-making algorithm for railway networks:modeling and simulation

The state of the art in scheduling “point-to-point” trains in a railway network utilizes the principles of centralized decision-making. The major difficulty of this approach is that the execution time and the memory requirements increase nonlinearly as the system grows in size. The present paper introduces a new approach, “DARYN”, wherein the overall decision process is analyzed and distributed onto every natural entity of the system. In DARYN, the decision process for every train is executed by an on-board processor that negotiates, dynamically and progressively, for temporary ownership of the tracks with the respective station controlling the tracks, through explicit processor to processor communication primitives. This processor then computes its own route utilizing the results of its negotiation, its knowledge of the track layout of the entire system, and its evaluation of the cost function. Every station's decision process is also executed by a dedicated processor that, in addition, maintains absolute control over a given set of tracks and participates in the negotiation with the trains. Presently, DARYN utilizes a simple cost function. However, if one chooses to increase the complexity of the cost function, DARYN's advantage over the traditional approach increases due to its enormous available computational power. Given that the current microprocessors such as MC68030, MC88000, Intel 486, and Intel 860 are powerful yet relatively inexpensive, a network of concurrently executing processors may offer superior price-performance quotient over a single high performance computer     

PSoC-based embedded design and quartz tuning fork for low-temperature measurement system design

This article describes a commercial quartz tuning fork (QTF), 8 mm in height by 3 mm in diameter, holding a two-terminal electronic component with a nominal frequency of 32.768 kHz and 12.5 pF typical load capacitance packed in a vacuum-sealed metal container, which has been used as a sensor for low-temperature measurement with good sensitivity, repeatability, and reliability. An embedded readout design with the support of a programmable system on-chip (PSoC) and virtual instrument control program, which uses a personal computer as an input/output device, provides online data acquisition of the QTF frequency data, which will in turn provide the measurement of the low-temperature bath in which the QTF is immersed. The embedded PSoC readout captures the varying frequency signals from the QTF as a response to the measurement temperature, processes it, and sends the frequency value to a personal computer, where LabVIEW, a graphical language ("G" language), displays the data in a graphical format. The QTFs for low temperature (300 K to 77 K) are well studied, whereas a sensor using a PSoC embedded design as a readout is a novel design implementation.     

Eddy current probe sensitivity as a function of coil construction parameters

We report the results of the first phase of a study designed to quantify the relationship between eddy current coil construction and the performance of these coils used in nondestructive evaluation (NDE) inspections. The ferrite core coils wound for this study are small but typical of the sizes commonly used in commercially manufactured eddy current probes. Coil diameters range from 1 mm to 7 mm with lengths from 0.5 mm to 4 mm. Seven parameters were studied and included ferrite diameter, ferrite permeability, coil aspect ratio, number of turns, distance of the windings from the inspection end of the ferrite, wire gauge, and length of the ferrite beyond the end of the windings. Additionally, the coil set was designed to provide some indication of the repeatability of identical constructions, what we have called winding inhomogeneity. The coils were incorporated into surface probes for scanning defects in flat plate specimens. The measure of sensitivity was the change of probe impedance (Z) as the probe was scanned from an unflawed area to the flawed area of the test specimen. Measurements were also made of the component of Z perpendicular to the liftoff vector.The data reported here were produced from a set of 27 probes scanned over a single defect. The defect was an electrical-discharge-machined (EDM) notch in a 19 mm thick 7075-T6 aluminum alloy specimen. The part-circular EDM notch was 9 mm long and 3 mm deep and 0.1 mm wide.Analysis of the data shows that the number of turns, the winding distance, the coil aspect ratio, and the backside ferrite length all affect the coil sensitivity. Winding inhomogeneity is significant for coils having many winding layers and can be considerably larger than the contribution made by variations in some of the construction factors. Wire gauge, ferrite diameter, and permeability showed no significant effects on our measure of sensitivity in this study.     

Structural health monitoring of railway tracks using IoT-based multi-robot system

Neural Computing and Applications - A multi-robot-based fault detection system for railway tracks is proposed to eliminate manual human visual inspection. A hardware prototype is designed to...     

Short‐beam three‐point bend test study in syntactic foam. Part III: Effects of interface modification on strength and fractographic features

Syntactic foam slabs having uncoated microballoons and paraffin oil surface‐treated microballoons were fabricated and tested for short‐beam three‐point bend test. The work points to the role of paraffin oil coating first weakening the interface between the microballoons and the matrix and hence lowering the efficiency of load transfer from matrix to the fillers (i.e., microballoons). This led to an overall decrement of 71% in the experimentally measured strength value compared to the deduced value for uncoated microballoons' specimens. The large strengths for uncoated microballoons specimens can be traced to the presence of the curvilinear marks in the matrix that, incidentally, are absent in the case of paraffin oil coated specimens. These observations are revealed distinctly in the microscopy of test‐failed specimens. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 687–693, 2005     

State of the academic field of IS in India

The field of information systems (IS) remains ill-defined, facing problems of recognition and identity crisis. Several papers and debates have been dedicated on this topic for over three decades. The focus of these debates have largely centered on the state of the IS field in Americas and Europe and with a limited study conducted in the Asia–Pacific context. This study attempts to assess the field in the Indian context and highlight the challenges and issues faced by IS faculties in India. Based on literature survey of the seminal papers in the field, we identified the salient topics of interest to IS researchers: identity of the IS field; diversity of the field; research approaches, methods and rigor; reference disciplines; journals and conferences; and IS course and curriculum. A two-phase study was carried out to explore the interest generated by the IS field in India. In the first phase, secondary data review of leading business schools in India was carried out to understand their focus on IS as an academic discipline. In the second phase, we conducted interviews of IS researchers from the premium business schools in India. In our study, we analyze the research focus of IS faculties in B-schools in India, analyze the composition of the faculty pool and the nature of research work undertaken by them. Our study points at the restricted focus of IS researchers in India around a few narrow areas, with a significant breadth of topics not being explored for research. We found the identity struggle of the field to be prominent, which was further compounded by the limited number of active, IS researchers. The growing importance of qualitative techniques in IS research, the challenges of developing a sound base in multiple reference disciplines and the need for making IS course interesting for business school students were some of the other significant observations. Our study also highlighted the paradox of the success of the IT industry in India leading to reduced enrollment of IS courses in B-Schools. We conclude by providing recommendations to B-school deans and directors.