Optimization of molten carbonate fuel cell (MCFC) and homogeneous charge compression ignition (HCCI) engine hybrid system for distributed power generation

In a previous study, a new hybrid system of molten carbonate fuel cell (MCFC) and homogeneous charge compression ignition (HCCI) engine was developed, where the HCCI engine replaces the catalytic burner and produces additional power by using the left-over heating values from the fuel cell stack. In the present study, to reduce the additional cost and footprint of the engine system in a hybrid configuration, the possibility of engine downsizing is investigated by using two strategies, i.e. the use of a turbocharger and the use of high geometric compression ratio for the engine design, both of which are to increase the density of the intake charge and thus the volumetric efficiency of the engine. Combining these two strategies, we suggest a new engine design with ∼60% of displacement volume of the original engine. In addition, operating strategies are developed to run the new hybrid system under part load conditions. It is successfully demonstrated that the system can operate down to 65% of the power level of the design point, while the system efficiency remains almost unchanged near 63%.     

Five New Oxylipins from Chaenomeles sinensis

In the course of our continuing search for bioactive constituents of Korean medicinal plants, we isolated five new oxylipins, chaenomic acid A–E ( 1 – 5 ), and six known ones ( 6 – 11 ) from the twigs of Chaenomeles sinensis. The structures of the new compounds ( 1 – 5 ) were determined by spectroscopic methods, including 1D and 2D NMR (¹H and ¹³C NMR, ¹H–¹H COSY, HMQC, HMBC, and NOESY), olefin cross‐metathesis, and LC/MS analysis. The known compounds ( 6 – 11 ) were identified by comparison of their spectroscopic data and specific optical rotation with the reported data. The isolated compounds ( 1 – 11 ) were tested for their inhibitory effects on nitric oxide production in lipopolysaccharide‐activated murine microglial cells and for their cytotoxic activities against four human cancer cell lines (A549, SK‐OV‐3, A498, and HCT‐15).     

制动测功器模型预测由于制动盘厚度改变制动转矩的变化

本研究推荐制动系统测功器数学模型用来鉴定制动转矩的变化(BTV),并确定动态试验和仿真间的相互关系,介绍了衬垫和盘之间简单模拟,作为点接触元件以及在时间范围内瞬态响应分析。该模型指出BTV的总量与衬垫刚度,摩擦系数,制动盘厚度变化和制动衬垫的有效半径成线性正比例,采用-制动测力器和附加的材料试验进行证实分析模型,动态试验表明所推荐的模型对预测-制动系统BTV具有合理的精确度。     

Early-warning performance monitoring system (EPMS) using the business information of a project

An early-warning performance monitoring system (EPMS) is proposed to objectively measure and monitor the performance of a project for early detection of inherent poor performance problems. The EPMS is built based on project progress data and consists of a database of business information, an optimized theoretical model used as a performance measurement baseline, and an index for monitoring and forecasting the performance. By monitoring the performance through an application of the EPMS to the Korean construction project, the quarterly variation of index was found to differ by project type. These results could explain the environmental changes in the project execution. Therefore, the EPMS is expected to be an alternative for objective performance monitoring and forecasting while applying the existing methods is difficult because of the limited available data on performance indicators. The development procedures may also be useful to researchers interested in approaches to quantitatively analyze trends in various industries.     

Three-dimensional Ni(OH)2 nanoflakes/graphene/nickel foam electrode with high rate capability for supercapacitor applications

Supercapacitor, known as an important energy storage device, is also a critical component for next generation of hydrogen fuel cell vehicles. In this study, we report a novel route for synthesis of three-dimensional Ni(OH)₂/graphene/nickel foam electrode by electrochemical depositing Ni(OH)₂ nanoflakes on graphene network grown on nickel foam current collector and explore its applications in supercapacitors. The resulting binder-free Ni(OH)₂/graphene/nickel foam electrode exhibits excellent supercapacitor performance with a specific capacitance of 2161 F/g at a current density of 3 A/g. Even as the current density reaches up to 60 A/g, it still remains a high capacitance of 1520 F/g, which is much higher than that of Ni(OH)₂/nickel foam electrode. The enhanced rate capability performance of Ni(OH)₂/graphene/nickel foam electrode is closely related to the presence of highly conductive graphene layer on nickel foam, which can remarkably boost the charge-transfer process at electrolyte–electrode interface. The three-dimensional graphene/nickel foam substrate also significantly improves the electrochemical cycling stability of the electrodeposited Ni(OH)₂ film because of the strong adhesion between graphene film and electrodeposited Ni(OH)₂ nanoflakes. Results of this study provide an alternative pathway to improve the rate capability and cycling stability of Ni(OH)₂ nanostructure electrode and offer a great promise for its applications in supercapacitors.     

Surfactant-assisted synthesis and catalytic activity for SOx abatement of high-surface-area CuMgAlCe mixed oxides

CuMgAlCe mixed oxides were prepared by a modified coprecipitation–calcination method using CTAB as surfactant template. All the precursors showed hydrotalcite-like layered structure and mixed oxides with mainly periclase phase were obtained after calcination. Catalytic activity for SO₂ removal of mixed oxides was examined through adsorption–reduction cycles under the conditions similar to those of FCC units. The results showed that incorporation of both Ce and Cu could improve SO_x oxidative chemisorption. CTAB/metal molar ratio during synthesis had a significant influence on the structural properties of mixed oxides. Sample CuMgAlCe-0.1 prepared by CTAB/metal molar ratio of 0.1 had the highest specific area 142.2 m²/g and also presented the best SO₂ adsorption rate and capacity. This behavior is mainly due to its exposed more adsorption sites provided by high specific surface area, facilitating SO₂ diffusion and contact with active components. It still possessed excellent cyclic stability that is beneficial for industrial application.     

A study on tension behavior considering thermal effects in roll-to-roll E-printing

The mathematical model for tension in a moving web by Shin [1] was extended by considering thermal strain due to temperature fluctuations in the drying of a roll-to-roll system. The extended model describes variations in tension and includes terms that represent the change of the Young’s Modulus, the thermal coefficient, and the thermal strain. In this paper, a new control scheme based on the extended model is proposed for mitigation of tension disturbances due to thermal strain in the drying process. Tension feedback control logic generally is not be applied due to the fact that register errors can be induced by speed alterations that help to compensate for tension disturbances. But in our approach, the thermal strain in the web is compensated for by means of velocity adjustments without adding extra register errors in the steady state. A computer simulation followed by an experimental validation was carried out to confirm the performance of the proposed method. The results show that the proposed model is useful for describing tension behavior and suggest that tension control logic improves control precision for the drying module of a roll-to-roll e-printing system.     

A correlation study on the phenolic profiles and corrosion inhibition properties of mangrove tannins (Rhizophora apiculata) as affected by extraction solvents

The objective of this study was to investigate the correlation of phenolic compositions and corrosion inhibition properties of Rhizophora apiculata bark extracts as affected by nine solvent systems. Several phenolic compositions, namely, total phenolic content (TPC), total flavonoid content (TFC), condensed tannin content (CTC) were investigated. In addition, the inhibitive actions of tannin extracts on mild steel in 1 M HCl solution were studied by potentiodynamic polarization and electrochemical impedance spectroscopy. The results showed that extraction solvents had significant effects on TPC, TFC, CTC and inhibition properties of extracts. A correlation between CTC and inhibition properties of R. apiculata bark extracts was revealed.