Design-Operation of Multi-Hydropower Reservoirs: HBMO Approach

To illustrate and test the applicability and performance of the innovative honey-bee mating optimization (HBMO) algorithm in highly non-convex hydropower system design and operation, two problems are considered: single reservoir and multi-reservoir. Both hydropower problems are formulated to minimize the total present net cost of the system, while achieving the maximum possible ratio for generated power to installed capacity. The single hydropower reservoir problem is approached by the developed algorithm in 10 different runs. The first feasible solution was generated initially and later improved significantly and solutions converged to a near optimal solution very rapidly. In the application of the proposed algorithm to a five-reservoir hydropower system with 48 periods and a total of 230 decision variables, in early mating flights, the first feasible solution was identified and the results converged to a near optimal solution in later mating flights. In the case of the multi-reservoir problem, an efficient gradient-based nonlinear-programming solver (LINGO 8.0) failed to find a feasible solution and for the single hydropower reservoir design problem it performed much worse than the proposed algorithm.     

Taguchi统计学分析方法优化Al 7068-TiC纳米复合材料的凝固行为

采用机械合金化和热压工艺制备高强Al 7068?5%TiC(质量分数)纳米复合材料。基于致密化的重要性和晶粒生长的影响,以获得较高抗压强度为目标,采用Taguchi统计法对制备Al 7068?5%TiC块体纳米复合材料的热压条件进行优化。结果表明：在500 MPa和385°C下热压30 min能获得抗压强度为938 MPa、硬度为HV 265的Al 7068?TiC纳米复合材料。此外,方差分析结果表明,外加压力是影响纳米复合材料热压过程最关键的因素。各因素对纳米复合材料热压过程影响贡献率为外加压力(61.3%)、热压温度(29.53%)和热压时间(4.49%)。     

The effect of MWNTs concentration and nanofiber orientation on mechanical properties of PAA nanocomposite nanofibrous web

In this research, nanocomposite nanofibrous webs of poly(acrylic acid) (PAA)/multi‐walled carbon nanotubes (MWNTs) were obtained via electrospinning. The effect of MWNTs concentration on the morphology and mechanical properties of PAA/MWNTs nanofibers was investigated by changing the MWNTs content from 0 to 5 wt%. The results showed that average diameter of nanofibers increased with increasing the MWNTs concentration and presence of MWNTs led to the enhancement of mechanical properties. Also, the results revealed that the strength, modulus, and elongation at break of samples increased 3.22, 2.70, and 4.27 fold, respectively, after adding 3 wt% of MWNTs. In addition, the effect of rotating speed of collector on the orientation of PAA nanofibers and its effect on mechanical properties was investigated. Scanning electron microscopy (SEM) studies demonstrated that the degree of nanofibers orientation increased with the augmentation of drum speed to 25 rps. Moreover, the average nanofibers diameter decreased with the increase of drum speed. Improvement of nanofiber orientation resulted in superior mechanical properties that is, higher strength and modulus of aligned nanofiber layers were obtained in comparison to nonaligned layers (12.6 and 26.6 fold, respectively). POLYM. COMPOS., 37:3149–3159, 2016. © 2015 Society of Plastics Engineers     

B4C reinforced NiTi-based composites: Microstructure and wear performance

In this study, NiTi–x wt.% B₄C (x = 0, 2, and 4) composites were consolidated with spark plasma sintering method, and the effects of boron carbide reinforcement addition on the microstructure and wear behavior of samples were investigated. Identification of the constituent phases of samples by the X-ray diffraction method plus Rietveld analysis revealed that the stability of the martensite phase increased in the composite samples because of mismatch stresses between the NiTi matrix phase and the reinforcing particles, which increases the density of the dislocations and facilitates the diffusion process that subsequently leads to the formation of stable intermetallics. The results of hardness test indicated that the hardness value increased from 3.67 GPa for pure NiTi to 10.99 GPa for NiTi–4 wt.% B₄C. Results of wear test revealed that boron carbide reinforced composite specimens had higher wear resistance, whereas wear rate of NiTi sample was 3.6 × 10⁻³ mm³/N m, and it reached to .21 × 10⁻³ mm³/N m for NiTi–4 wt.% B₄C. Investigation of microstructure by scanning electron microscopy images and EDS analysis revealed that the wear mechanism in NiTi samples was abrasive and the addition of B₄C to NiTi changed the wear mechanisms from abrasive to a combination of oxidation, adhesive, and delamination mechanisms.     

Application of a modified VIKOR method for decision-making problems in lean tool selection

Group decision making with multiple criteria is the most popular method for ranking a set of alternatives. In this regard, all alternatives are compared based on a common criteria set. Meanwhile, decision makers sometimes encounter special situations, for example, having to select from among a set of alternatives without a set of criteria or with a set of criteria that are grouped/related to various alternatives. Thus, it may be impossible to select from among a set of alternatives using typical methods. Hence, in this study, a new, modified VIKOR method is proposed to address the lean tool selection problems in manufacturing systems. In this study, a model was developed to help practitioners improve their ability to solve problems when the possible solutions have their own individual criteria. In fact the modified VIKOR method can be applied to rank alternatives in threefold: alternatives with common criteria, without common criteria, with integrated common, and uncommon criteria. This paper offers numerical examples of the model, using a case study to illustrate an application of the proposed model and properly assess the validity of this new method. The results demonstrate the usefulness and effectiveness of the modified new method. The model covers the lack existing in the current literature to assess effectiveness of applying lean tools.     

Effect of copper nanoparticles on permeability, physical, and mechanical properties of particleboard

Effects of a 200 ppm nanocopper suspension, with size range from 10 to 80 nm, on the physical and mechanical properties of particleboard made on an industrial scale at the Iran-Choob Factory were studied. Nanocopper suspension was added to the mat at two levels of 100 and 150 ml/kg dry weight wood particles and compared with control boards. Results showed that hot-pressing time was reduced by 5.7 and 3.4 % when 100 and 150 ml of nanocopper were used, respectively. Also, both levels of nanocopper consumption had improving effects on physical and mechanical properties, although in some cases not significant. Permeability was significantly decreased to its lowest value in 150 ml/kg treatment. It can be concluded that 150 ml of nanocopper/kg may be used to improve the physical and mechanical properties, to reduce press time, and to decrease permeability in particleboards. For industrially accepted outcome, 150 ml/kg of nanocopper is recommended.     

Document Image Coding for Processing and Retrieval

Document images belong to a unique class of images where the information is embedded in the language represented by a series of symbols on the page rather than in the visual objects themselves. Since these symbols tend to appear repeatedly, a domain-specific image coding strategy can be designed to facilitate enhanced compression and retrieval. In this paper we describe a coding methodology that not only exploits component-level redundancy to reduce code length but also supports efficient data access. The approach identifies and organizes symbol patterns which appear repeatedly. Similar components are represented by a single prototype stored in a library and the location of each component instance is coded along with the residual between it and its prototype. A representation is built which provides a natural information index allowing access to individual components. Compression results are competitive and compressed-domain access is superior to competing methods. Applications to network-related problems have been considered, and show promising results.     

Honey-Bees Mating Optimization (HBMO) Algorithm: A New Heuristic Approach for Water Resources Optimization

Over the last decade, evolutionary and meta-heuristic algorithms have been extensively used as search and optimization tools in various problem domains, including science, commerce, and engineering. Their broad applicability, ease of use, and global perspective may be considered as the primary reason for their success. The honey-bees mating process may also be considered as a typical swarm-based approach to optimization, in which the search algorithm is inspired by the process of real honey-bees mating. In this paper, the honey-bees mating optimization algorithm (HBMO) is presented and tested with few benchmark examples consisting of highly non-linear constrained and/or unconstrained real-valued mathematical models. The performance of the algorithm is quite comparable with the results of the well-developed genetic algorithm. The HBMO algorithm is also applied to the operation of a single reservoir with 60 periods with the objective of minimizing the total square deviation from target demands. Results obtained are promising and compare well with the results of other well-known heuristic approaches.     

Preparation and characterization of novel derivatives of chitosan and trimethyl chitosan conjugated with dipeptides and vitamin B12 as candidates for oral delivery of insulin

Chitosan and its derivatives are widely used in drug delivery systems due to their bio-degradebility, bio-compatibility and absorption enhancing properties. Many peptide and protein derived therapeutics cannot be administered through oral rout because of the proteolytic condition of gastro-intestinal tract and their low bio-availability. Insulin is a peptide drug which is widely used in diabetics as repeated daily injection. Due to the fact that there are receptors for didpeptides and vitamine B12 in small intestine, in this research work novel derivatives of chitosan and trimethyl chitosan conjugated with glycyl-glycine, alanyl-alaninie and vitamine B12 were synthesized and characterized. The structure of conjugates as well as substitution of different functional groups was confirmed by different instrumental analytical methods such as Fourier transform infrared, magnetic resonance, and X-ray diffraction spectroscopy. Nano-particles of aforementioned loaded with insulin were prepared and their size, surface electrical charge and morphology characterized and their release profile were studied. The results are promising and reveal that these new chitosan and trimethyl chitosan derivatives are potential vehicles for protein and peptide drug molecules.     

A SAR-based ΣΔ modulator using shared DAC

In this paper a new successive approximation (SA) quantizer based on the elimination of the digital to analog converter (DAC) from the quantizer structure is presented. Instead; the feedback DAC block of the ΣΔ modulator is shared by SA quantizer. Using an efficient decoding algorithm in the proposed structure in conjunction with the above SA quantizer DAC elimination method, results in a reduction of the level number of the feedback DAC, and hence, a significant drop in power and area consumption is achieved. In order to study the performance of the proposed structure, a third order discrete-time ΣΔ modulator is designed and simulated in 0.18 μm CMOS technology with the following performance characteristics; a signal to noise ratio of 79.2 dB, dynamic range of 84.8 dB, power consumption of 3.75 mW and a figure of merit of 0.66 pJ/conv from a 1.8 V supply with an input signal of 200 kHz bandwidth.