Recent Advances in Communication and Internet Technology

Telecommunication Systems -     

Atomically flat diamond (111) surface formation by homoepitaxial lateral growth

A process of homoepitaxial growth of diamond (111) films by microwave plasma-enhanced chemical vapor deposition has been investigated characterizing areas by ex-situ atomic force microscopy. The evolution of surface morphology during a lateral growth of (111) diamond was visualized utilizing a mesa structure as a marker. Lateral growth forms atomically flat surfaces, which show atomically flat terraces over several hundred nm widths and single bilayer steps of (111) diamond.     

EPR study of the electronic states of β′-(BEDT-TTF)(TCNQ)

β′-(BEDT-TTF)(TCNQ) is a compound of BEDT-TTF (=ET) and TCNQ molecules aligned orthogonally with each other, forming two-dimensional sheets and one-dimensional columns of 1/4-filled π band, respectively. It is known that the metal-insulator transition occurs at 330 K at ambient pressure. We have measured the electronic spin susceptibility by means of the EPR-NMR method at 50 MHz, and the angular dependence of g-factor and line width of EPR both at Q (34 GHz) and W (94 GHz) band. We successfully confirmed that the antiferromagnetic transition occurs in ET sheets and TCNQ columns, independently.     

A dynamic multicast routing satisfying multiple QoS constraints

In this paper we propose a QoS‐based routing algorithm for dynamic multicasting. The complexity of the problem can be reduced to a simple shortest path problem by applying a Weighted Fair Queuing (WFQ) service discipline. Using a modified Bellman–Ford algorithm, the proposed routing builds a multicast tree, where a node is added to the existing multicast tree without re‐routing and satisfying QoS constraints. With user defined life‐time of connection this heuristic algorthm builds multicast tree which is near optimum over the whole duration of session. Simulation results show that tree costs are nearly as good as other dynamic multicast routings that does not consider QoS. Copyright © 2003 John Wiley & Sons, Ltd.     

Property of eigenvalues and eigenfunctions for an interface V-notch in antiplane elasticity

The so-called pseudo-orthogonal property of the eigenfunction expansion form is proved to be valid for the case of an antiplane interface V-notch and the corresponding path-independent integral is derived. The relation between the path-independent integral and the stress intensity factor of the notch is found. The influence of loads on the related integral is also presented.     

Reactive carbon black having isocyanate or acyl azide group

Summary Introduction of isocyanate (NCO) group onto carbon black surface was achieved by the treatment of carbon black with toluene-2,4-diisocyanate. In addition, carbon black having acyl azide (CON₃) group, a precursor of NCO group, was prepared by the reaction of COCl or COOCOOC₂H₅ group on carbon black with NaN₃. The CON₃ group on carbon black was relatively stable at below 20°C but readily decomposed to NCO group by heating (Curtius rearrangement). By the reation of NCO group on carbon black with hydroxyl group of polymers, such as polypropylene glycol, polyethylene glycol, and polyvinyl alcohol, these polymers were found to be grafted onto carbon black.     

Numerical study of radiation‐convection heat transfer

In this study, the authors attempted to introduce a simulation technique for radiation‐convection heat transfer in the high‐temperature fields of industrial furnaces, boilers, and gas turbine combustors. The convection effect was analyzed by a differential equation, but the radiation effect was analyzed by an integral equation. Thus, it was not easy to arrange both effects using the same type of equations. Then, the authors introduced the zone method and Monte Carlo method for the integral equation of the radiation effect and the finite difference method for the differential equation of the convection effect. A three‐dimensional analysis of the high‐temperature furnace was performed by this simulation technique to obtain its temperature distribution. Furthermore, another radiation‐convection heat transfer analysis in the low‐temperature living room was performed by the same technique. Finally, the authors tried to develop a computer software for radiation‐convection heat transfer and described their idea of software construction for the above. © 2002 Wiley Periodicals, Inc. Heat Trans Asian Res, 31(5): 391–407, 2002; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.10042     

Synthesis and photoluminescence of bright water-soluble CdSe/ZnS quantum dots overcoated by hybrid organic shell

Photoluminescence properties from water soluble CdSe/ZnS QDs encapsulated with hybrid trioctylphosphine-poly(acrylamide-co-acrylic acid)-ethanolamine (TOPO-PSMA-EA) shell have been investigated. It was found that PL efficiency of CdSe/ZnS QDs in water was increased 5–30% after introducing PSMA-EA polymers to encapsulate CdSe/ZnS-TOPO QDs. Higher PSMA concentrations were found to enhance the PL efficiency of QDs up to 1.8 folds, which is ascribed to a better packing and passivation of the TOPO-PSMA-EA shell over the QDs. Time-resolved photoluminescence suggested that the mean lifetime of photoexcited carriers in the water-soluble CdSe/ZnS-TOPO-PSMA-EA QDs elongated 2–17 ns compared with that of uncoated samples, indicating that PL quenching defects were effectively removed for CdSe/ZnS QDs with hybrid TOPO-PSMA-EA shell.     

Effects of Al and Zn additions on mechanical properties and precipitation behaviors of Mg-Sn alloy system

For the Mg-Sn-Al alloys, the ultimate strength (UTS) of an extruded Mg-9wt.%Al-2wt.%Sn alloy reached 390 MPa. TEM observation indicated that plate-like Mg₁₇Al₁₂ precipitates having Burgers orientation relationship with the matrix are responsible for the strength. This alloy also exhibits an age hardening behavior: the peak hardness appears after 15-20 h of heat treatment at 473 K. On the other hand, the UTS of the Mg-Mg-Sn-Zn alloys are on the order of 300 MPa. The precipitates in these alloys are composed of the Mg₂Sn and MgZn₂ particles. It was found that these phases often precipitate together, suggesting that the MgZn₂ phase can act as a nucleation sites for Mg₂Sn.     

Anti-obesity and anti-diabetic effects of ethanol extract of Artemisia princeps in C57BL/6 mice fed a high-fat diet

Artemisia princeps is commonly used as a food ingredient and in traditional Asian medicine. In this study, we examined the effects of long-term administration of an ethanol extract of A. princeps (APE) on body weight, white adipose tissue, blood glucose, insulin, plasma and hepatic lipids, and adipocytokines in C57BL/6 mice fed a high-fat diet. Daily feeding of a 1% APE diet for 14 weeks normalized elevated body weight, white adipose tissue, and plasma glucose and insulin levels, and delayed impaired glucose tolerance in mice a fed high-fat diet. These events were not observed in mice fed a control diet containing 1% APE. Liver triglyceride and cholesterol levels were similar in mice fed a 1% APE-diet and those fed a control diet. In the high-fat diet groups, APE inhibited hepatic fatty acid synthase (FAS) and suppressed the elevation of plasma leptin, but had no effect on adiponectin levels. These findings suggest that the regulation of leptin secretion by APE may inhibit FAS activity with subsequent suppression of triglyceride accumulation in the liver and adipose tissues. Inhibition of lipid accumulation can, in turn, lead to improvements in impaired glucose tolerance.