Analytical determination of intrinsic permeability of synthetic nonwoven filter fabrics

In this paper an analytical method for determining the permeability of nonwoven filter fabrics is presented. The derived formula shows that the intrinsic permeability, fully characterizing the porous medium, depends on fabric porosity, n, fibre diameter, d, and a shape factor determined experimentally.     

Quantitative description of the microstructure–porosity of sialons and iron silicide inclusions

Sialon ceramics are a modern type of engineering ceramics with excellent mechanical, thermal and corrosion resistant properties. This paper describes the structure characterisation of porous sialon ceramics. It is possible to significantly improve the strength and crack resistance of sialon ceramics as a result of a reduction of the volume fraction of porosity.     

Influence of the amount of ferromagnetic addition on the rheological properties of spinning solutions,the structure,the strength,and thermal properties of polyacrylonitrile fibres

The rheological properties of spinning solutions of polyacrylonitrile in dimethyl formamide (DMF) containing various amounts of a ferromagnetic nanoaddition were investigated. The porous structure, the strength and thermal properties of fibers obtained from these solutions were assessed, as well as the uniformity of the nanoaddition distribution on the fiber surface was estimated. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Potentiometric studies of oxidation–reduction reactions with redox copolymers

Polymeric oxidants in the bead form that were macroporous styrene/divinylbenzene copolymers containing N‐chlorosulfonamide functional groups (in sodium or hydrogen form) or N‐bromosulfonamide groups (in sodium form) were synthesized and investigated to determine their oxidizing powers. The redox potentials of the N‐chlorosulfonamide/sulfonamide and N‐bromosulfonamide/sulfonamide systems were determined by potentiometric studies at different pH values with aqueous solutions of Na₂SO₃, KCN, and KSCN as reducers. The formal redox potentials of the N‐chlorosulfonamide copolymers were 0.79, 0.44, and ?0.12 V at pH's of 1.8, 8.45, and 13.6, respectively. The formal redox potential of the N‐bromosulfonamide copolymer was about 100 mV higher in comparable conditions and in solutions over pH = 5 (e.g., 0.56 V at pH = 8.56). The comparatively higher oxidizing power of the N‐bromosulfonamide copolymer was particularly evident in a strong alkaline medium (in which the N‐chlorosulfonamide copolymer was not reactive). In contrast, the N‐chlorosulfonamide copolymer showed strong oxidative properties in acidic media (in which the N‐bromosulfonamide copolymer decomposed itself). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Separation of weak and strong acids by electro-electrodialysis—Experiment and theory

The experimental results of the separation of acetic acid (HA) from the sulfuric acid by the electro-electrodialysis (EED) method and the modeling of process have been presented. The Neosepta membranes CMX and ACM have been used. It has been found that the efficiency of retention of HA is high (>0.9) when the process is conducted below the limiting current density with respect to HSO₄⁻ or SO₄²⁻ anions. The observed current efficiency of the H₂SO₄ removal was rather low (CE_S = ca. 0.7, when the initial concentration of H₂SO₄ in the mixture was 1 or 2 M) which was caused by the nonideal selectivity of the anion-exchange membrane. The experimental results have been described by the model based on the extended Nernst-Planck equation and the Donnan equilibrium. Since the efficiency of the process depended mainly on the selectivity of anion-exchange membrane (ACM), the concentration of fixed charges of that membrane, , and the ratio of volume fraction of pores to their squared tortuosity, V_p/θ², have been chosen as the main fitting parameters. It has been found that the fitting of the EED data depends mainly on , whereas in the modeling of diffusion experiment (or an EED experiment conducted at low current density) both parameters are important. The best fit has been obtained for , i.e. ca. one order smaller than that determined experimentally. The obtained optimal value of V_p/θ², equal to 0.013, is consistent with those previously obtained for other Neosepta anion-exchange membrane.     

Effect of annealing on the structure and electrical properties of sulfur-doped amorphous c-BN layers

Undoped and sulfur doped amorphous cubic boron nitride (a-cBN) layers were deposited on to silicon substrates by reactive pulse plasma (RPP) method. Subsequently they were annealed at 475, 500 and 700 K for 1 h in pure nitrogen atmosphere. In this study structural and electronic properties of unannealed and annealed layers were investigated. The results show that a consequence of annealing is formation of microstructural stable nanocrystalline cubic boron nitride film as well as substitutional location of introducedin situ donor impurities. This resulted in creation of a-cBN(n-type)-Si(p-type) heterojunction.     

Determination of porous glass surface free energy components from contact angles

The contact angles of water drops and diiodomethane drops on pellets made of controlled porosity glasses have been measured. The surface of the glasses was modified by thermal treatment at 873 K which led to an increase in the surface concentration of boron atoms. Glass modified with Carbowax 20M (polyethylene glycol) and fully hydroxylated glass have also been studied. Using the measured contact angles and modified Young equation, the dispersion and nondispersion components of the glass surface free energy have been calculated. The values show that with increasing heating time (increasing surface density of boron atoms) an increase in the surface polarity takes place. However, the polarity of the same samples decreases after treatment with Carbowax, increasingly so with higher boron atom concentrations.     

Allotropic phase transformations induced by ultraviolet power laser irradiation of graphite

Optically induced allotropic phase transformations of carbon were studied. Under irradiation with a laser beam of 337.1 nm wavelength, at an energy density of 1.9 mJ per 0.1 mm², graphite transformed into -carbin, and amorphous carbon-film transformed into rhombohedral graphite with no evidence of high-temperature effects. The transformations differ from the changes occurring due to heating alone. We suggest that the results could be explained by the one-photon excitation and recombination of electrons.     

Allotropie phase transformation induced by UV power laser irradiation of boron nitride

The optically induced allotropic phase transformations of boron nitride were studied. Under irradiation with laser beam of 337.1 nm wavelength, at energy density of 1.9mJ per 0.1 mm² a hexagonal boron nitride transformed into the cubic form. The suggestion is made that the results obtained could be explained by the multiphoton excitation and recombination of electrons.