Wetting properties of polystyrene ionomers treated with plasma source ion implantation

The wetting properties of polystyrene‐based ionomers treated with plasma source ion implantation (PSII) were investigated by the measurement of water contact angles. When sulfonated ionomers were aged for a few days, the hydrophobic recovery for the ionomers became much slower than that for the nonionic polymers. However, when the samples were aged over 20 days, the water contact angle of the ionomers converged with that of the nonionic polymer. Thus, it was concluded that the ionic interaction between the ionic groups and the presence of ionic groups together resulted in the slow hydrophobic recovery and that the aging effect was significant for the ionomers. For the methacrylate ionomer of low ion content, on the other hand, it was found that the PSII treatment produced only a small change in hydrophobic recovery behavior. Thus, it was suggested that the low ionic content coupled with the small size of the ionic unit might cause changes only of a very insignificant degree in hydrophobic recovery behavior. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2500–2504, 2002     

环氧树脂质量对紫外光固化涂料性能的影响

介绍了紫外光(UV)固化涂料基本组成,双酚A环氧树脂质量对环氧丙烯酸酯的合成及对UV涂料性能的影响。     

肾缺血再灌注细胞内钙水平与氧化应激损伤研究

目的 观察肾细胞中游离钙([Ca~(2+)]i)及氧自由基在缺血再灌注损伤过程中的改变情况,探讨二者在再灌注肾损伤中发生作用机制。方法 摘除Wistar大鼠左肾,钳夹右侧肾蒂,建立急性缺血再灌注肾损伤模型,应用Fura-2/AM荧光指示剂测定缺血再灌注大鼠肾细胞内[Ca~(2+)]i浓度的变化,同时测定谷胱甘肽过氧化物酶(GSH-Px)活性、超氧化物歧化酶(SOD)活性和丙二醛(MDA)含量。结果 缺血再灌注不同时期肾细胞内[Ca~(2+)]i浓度均有不同程度增高,与对照组相比差异有显著意义,各实验组SOD活力水平降低,与对照组相比差异有显著意义,MDA生成高于对照组,GSH-Px在再灌注早期活力减弱,明显低于对照组,晚期活力基本恢复。结论 1.缺血再灌注不同时期大鼠肾细胞内[Ca~(2+)]i超载和不同程度的氧化侵袭,在缺血再灌注肾损伤病理过程中起重要作用;2.再灌注时间与肾细胞内[Ca~(2+)]i超载呈正相关,提示再灌注损伤通过不同机制加重细胞钙超载。     

具有纳米结构的TiO_2纤维光催化氧化活性

研究了具有纳米结构,高比表面的锐钛矿TiO2纤维在光催化降解苯酚体系中的氧化性能,发现其活性与P25相当;通过加羟基自由基猝灭剂证实了羟基自由基(HO.)对苯酚降解的贡献;而通过加空穴猝灭剂则观察到明显的空穴(h )效应。并通过K I氧化反应进一步研究了催化剂表面上的空穴效应,结果表明,TiO2纤维上的光生空穴比P25稳定,其空穴量子产率是后者的3.3倍。     

Seeded Crystallization of Leucite

The leucite crystallization kinetics from a hydrothermally derived precursor seeded with nano-crystalline leucite was investigated by X-ray diffraction and non-isothermal differential thermal analysis. The nano-crystalline leucite was prepared by high-energy milling of high-purity leucite powder and the leucite precursor was prepared by the hydrothermal method of silica sol, aluminum nitrate, and potassium nitrate. After the seeds were introduced, the crystallization temperature of the precursor was lowered by 100°C and the transition phase kalsilite did not appear during the crystallization process. When the seeded precursor was heat treated at 700°C, a small amount of cubic leucite was stabilized to room temperature. The seeded precursor showed an exothermic peak between 800° and 920°C under different heating rates. The activation energy for the growth of leucite from the seeded precursor was 256(SD9) kJ/mol.     

氯气处理系统的改进

介绍了为配合离子膜烧碱的扩产对氯气处理工序进行的技术改造内容，包括更新洗涤塔、降低系统阻力、更新筛板塔、提高氯压机泵头及改造氯压机出口缓冲罐等。通过改造，降低能耗和硫酸消耗，延长了设备的使用周期，取得了良好的经济效益。     

Mechanical and thermal properties of ceramic‐modified poly(amide imide)

Poly(amide imide)–epoxysilane (coupling agent) composites were reacted with silica, a condensation product of tetraethylorthosilicate (TEOS), by a sol–gel process and were then cast into films. After this procedure, the chemical characteristics and mechanical and thermal properties were measured. Fourier transform infrared showed that silica existed in the poly(amide imide) matrix. When a proper amount of silica was added to the poly(amide imide) matrix, the tensile strength, elongation, and toughness increased greatly. A poly(amide imide)/30 wt % epoxysilane composite with 20 wt % TEOS had the best mechanical properties. Thermogravimetric analysis under nitrogen and oxygen atmospheres indicated that the char contents increased with the amount of silica. The glass‐transition temperatures of the poly(amide imide)–silica nanocomposites were observed around 170–180°C with differential scanning calorimetry. This approach may be a new method for the low‐temperature thermal curing of poly(amide imide). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1780–1788, 2004     

Preparation and application of fluorocarbon polymer/SiO2 hybrid materials,part 1: Preparation and properties of hybrid materials

For this study, we first prepared a fluorocarbon polymer and its hybrid materials. We found that fluorocarbon copolymers can produce hydrogen bonds with SiO₂ to form hybrid materials. We also used thermogravimetric analyzer and tested the thermostabilities of the four products, which were ranked as follows: fluorocarbon copolymer/SiO₂ hybrid material > fluorocarbon polymer/SiO₂ hybrid material > fluorocarbon copolymer > fluorocarbon polymer. In addition, we found that, due to the inorganic SiO₂ used, the number of pores and the specific surface areas of the hybrid materials both increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1140–1145, 2007     

Friction of linerboard based on recycled fiber

The purpose of this investigation was to study the origin of the differences in paper‐to‐paper friction of linerboards based on old corrugated containers (OCC). The sheets were subjected to two extraction stages and analyzed with respect to, surface roughness, and their content of low‐molecular‐mass lipophilic compounds (LLC). Friction was measured using a friction tester based on the horizontal plane principle. The surface roughness was measured using a Perthometer profiler and the low molecular mass lipophilic constituent of the paper sheets was determined by gas chromatography‐mass spectroscopy. The sheets were imaged using environmental scanning electron microscopy (ESEM), and the relative compositions of inorganic ions on the paper surfaces were determined by energy dispersive X‐ray spectroscopy (EDS). The results showed that a high amount of LLC in the sheets lead to low friction, due to lubrication. It was also observed that large CaCO₃ particles on the surface had a friction‐increasing effect, and that there was no relationship between the surface roughness and the friction. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1511–1520, 2002     

Comparison of relative viscosity measurement of polyvinylpyrrolidone in water by glass capillary viscometer and differential dual‐capillary viscometer

The relative viscosity (RV) of polyvinylpyrrolidone (PVP) with different molecular weights was measured with a glass capillary viscometer and with a differential dual‐capillary viscometer in water at different concentrations. For the differential dual‐capillary viscometer, RV increases with a decreasing flow rate, especially for high molecular weight PVP at a 1% concentration. A good agreement in the RV between the two methods can be obtained for PVP with different molecular weights and at various concentrations if an appropriate flow rate is selected for the differential dual‐capillary viscometer. Special precaution is needed when using the differential dual‐capillary viscometer to measure the viscosity of a pure solvent. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1312–1315, 2002