Controller design for a wind farm, considering both power and load aspects

In this paper, a wind farm controller is developed that distributes power references among wind turbines while it reduces their structural loads. The proposed controller is based on a spatially discrete model of the farm, which delivers an approximation of wind speed in the vicinity of each wind turbine. The control algorithm determines the reference signals for each individual wind turbine controller in two scenarios based on low and high wind speed. In low wind speed, the reference signals for rotor speed are adjusted, taking the trade-off between power maximization and load minimization into account. In high wind speed, the power and pitch reference signals are determined while structural loads are minimized. To the best of authors’ knowledge, the proposed dynamical model is a suitable framework for control, since it provides a dynamic structure for behavior of the flow in wind farms. Moreover, the controller has been proven exceptionally useful in solving the problem of both power and load optimization on the basis of this model.     

Determination of surface-induced platelet activation by applying time-dependency dissipation factor versus frequency using quartz crystal microbalance with dissipation

Platelet adhesion and activation rates are frequently used to assess the thrombogenicity of biomaterials, which is a crucial step for the development of blood-contacting devices. Until now, electron and confocal microscopes have been used to investigate platelet activation but they failed to characterize this activation quantitatively and in real time. In order to overcome these limitations, quartz crystal microbalance with dissipation (QCM-D) was employed and an explicit time scale introduced in the dissipation versus frequency plots (Df–t) provided us with quantitative data at different stages of platelet activation. The QCM-D chips were coated with thrombogenic and non-thrombogenic model proteins to develop the methodology, further extended to investigate polymer thrombogenicity. Electron microscopy and immunofluorescence labelling were used to validate the QCM-D data and confirmed the relevance of Df–t plots to discriminate the activation rate among protein-modified surfaces. The responses showed the predominant role of surface hydrophobicity and roughness towards platelet activation and thereby towards polymer thrombogenicity. Modelling experimental data obtained with QCM-D with a Matlab code allowed us to define the rate at which mass change occurs (A/B), to obtain an A/B value for each polymer and correlate this value with polymer thrombogenicity.     

The forest biorefinery and its implementation in the pulp and paper industry: Energy overview

Incorporating a biorefinery unit to an operating Kraft pulping process has significant technological, economic and social advantages over the construction of a grassroot biorefinery. Also, the conversion of a Kraft mill from total pulp making to complete biorefinery can be done in a stepwise fashion and so give a company that envisages such transformation the opportunity to master the new technologies, evaluate options and develop an appropriate business plan. In all cases however, the road to conversion presents serious challenges. As components of the wood such as lignin or hemicelluloses are withdrawn from the Kraft pulp line, the heat production capacity from the recovery boiler where they are currently burnt is diminished. At the same time the operation of the added biorefinery unit increases the steam demand. In order to avoid fossil fuel dependency, the total site must be highly integrated and optimized. The application of an intensive and innovative energy optimization methodology to actual case studies has shown that the green, low GHG emissions biorefinery is feasible. The economics can be attractive for a site combining specialty wood pulp and bio-product, biomass gasification, power cogeneration and heat upgrading by optimally positioned and designed absorption heat cycles. The methodology has been applied to biorefining technologies for lignin and hemicelluloses extraction and valorisation, both technologies being coupled with gasification of wood residue.     

Use of low‐level plasma for enhancing the shrink resistance of wool fabric treated with a silicone polymer

This study examines the effects of an atmospheric pressure plasma (APP) pre‐treatment on the shrink resistance of wool fabric treated subsequently, by the pad/dry method, with an aqueous emulsion of the amino‐functional polydimethylsiloxane, SM 8709. Optimal shrink resistance (with no impairment of fabric handle) was obtained after a low‐level plasma treatment (1–3 s exposure time), using 5% of the polymer emulsion. Higher levels of silicone polymer could be used to achieve shrink resistance in the absence of a plasma pre‐treatment, but the fabric handle would be adversely affected. X‐ray photoelectron spectroscopy (XPS) studies showed that the bulk of the covalently bound surface lipid layer was removed after a plasma exposure time of 30 s. For treatment times of 3 s or less, however, the removal was incomplete, suggesting that optimum shrink resistance (after treatment with the silicone polymer) was associated with the modification of the surface layer rather than its complete destruction. Scanning electron micrographs (SEMs) revealed that the plasma pre‐treatment did not lead to any physical modifications (such as smoothening of the scale edges), even for long exposure times, and had no significant impact on the extent or nature of the inter‐fibre bonding of the polymer. Confocal microscopy showed uniform spread of polymer on single fibres. It is concluded that the main impact of the plasma pre‐treatment was to enhance the distribution of polymer both on and between fibres and to improve adhesion of polymer to the fibre.     

Theoretical and practical investigations of copper ion selective electrode with polymeric membrane based on N,N′-(2,2-dimethylpropane-1,3-diyl)-bis(dihydroxyacetophenone)

A novel ion-selective poly(vinyl chloride) (PVC) membrane sensor for Cu²⁺ ions based on N,N′-(2,2-dimethylpropane-1,3-diyl)-bis(dihydroxyacetophenone) (NDHA) as a new ionophore was prepared and studied. The best performance was observed for the membrane composition, including 30:65:1:4 (wt%) = PVC:DBP:KTpClPB:NDHA. The electrode showed a good Nernstian slope of 30.0 ± 0.5 mV/decade in a wide linear range activity of 3.0 × 10⁻⁷ to 1.0 × 10⁻² mol dm⁻³ Cu(NO₃)₂ with limit of detection 2.5 × 10⁻⁷. Sensor exhibited a fast response time (t_95% < 10 s) and could be used for about 4 months in the pH range of 3.0–7.4. The proposed potentiometric sensor was found to work satisfactorily in partially non-aqueous media up to 30 (vol%) content of methanol, ethanol and acetone. Applications of this electrode for the determination of copper in real samples, and as an indicator electrode for potentiometric titration of Cu²⁺ ion using EDTA, were reported. In order to predict the extraction ability of NDHA for different metallic ions, the complexes [M(NDHA)] and [M(H₂O)₆] (where M = Cu²⁺, Co²⁺, Hg²⁺, Pb²⁺, Ag⁺, Mg²⁺, Ca²⁺, Mn²⁺, Zn²⁺, Cd²⁺, K⁺ and Al³⁺) were investigated using ab initio theoretical calculations. The metal binding capability was evaluated using the binding energy. Results of our study could be useful for prediction of the extraction power of this Schiff base and could play a guiding role in planning experiments.     

Production of three anti-listerial peptides by Lactobacillus curvatus in MRS broth

Three novel bioactive peptides (BAP1–3) from Lactobacillus curvatus CWBI-B28 were isolated and purified using de Man, Rogosa and Sharp (MRS) broth by a three-step protein purification protocol including ammonium sulfate precipitation, hydrophobic C₁₈ Sep-Pak column and reverse-phase high performance liquid chromatography (RP-HPLC). This procedure allowed the recovery of chromatographically pure antimicrobial peptides with the yields of 19%, 10% and 15% of BAP1, BAP2 and BAP3, respectively. The respective apparent molecular masses as determined by tricine-SDS-polyacrilamide gel electrophoresis were 6365, 3426 and 3496. N-terminal amino acid sequencing of the BAPs and comparison of their sequences with those of international data bases indicated that BAP1 is more likely to be a casein-derived bioactive protein produced upon hydrolysis of the tryptone present in MRS broth by Lb. curvatus CWBI-B28 during active growth. However, the identity of BAP2 and BAP3 could not be determined with certainty; yet, they would be novel bacteriocins not fitting in any of the known classes of bacteriocins. Therefore, this strain would have the ability to produce intrinsic antimicrobial substances and also release bioprotective peptides from milk-proteins upon cultivation in milk or casein-containing food products due to its proteolytic activity. Thus, Lb. curratus CWBI-B28 possesses a good potential to be used in food preservation and safety.     

Analysis of the hazards for the molten cuprous chloride pouring operation in an industrial hydrogen production facility

An analysis is reported of a design for a local exhaust ventilation system for the molten cuprous chloride pouring station in an industrial plant. Heat recovery from molten cuprous chloride is a key process within the copper–chlorine (Cu–Cl) cycle of thermochemical water splitting for hydrogen production. Because of particulate matter, dust, and vapors emitted by the molten salt, an effective and safe design is crucial. The design process involves calculating duct diameters to provide the desired duct air velocity through the system. The static pressure is evaluated so that the fan size can be determined. An adequate supply of makeup air must be provided to replace the air exhausted through the ventilation system. The economics of the ventilation system and ways to protect employee health, as well as minimize the costs associated with exhaust ventilation, are also described. Copyright © 2011 John Wiley & Sons, Ltd.     

Miscibility and tack of blends of poly (vinylpyrrolidone)/acrylic pressure-sensitive adhesive

In this study, miscibility and tack of blends of poly (vinylpyrrolidone) (PVP)/acrylic pressure-sensitive adhesive (PSA) were evaluated. For this purpose, appropriate amounts of PVP (2–30% w/w) were added to an acrylic PSA to obtain visually homogeneous solution. The resulting solution was evenly applied on a polyethylene terephthalate (PET) film with final specific thicknesses of 10, 40, and 70 μm by using a film applicator and miscibility as well as tack values were evaluated. With the addition of 2% (w/w) PVP the tack value decreased and increased in 5% (w/w) PVP and then continuously decreased up to 30%(w/w). It was found that the tack value was related to miscibility as well as to viscosity and the free functional group such as hydroxyl group of the blend. By the morphological analysis performed through scanning electron microscopy (SEM) and also by the study of thermal analysis using the differential scanning calorimetry (DSC) behavior of blends, it was found that the two distinct phases constituted after adding 5% (w/w) of PVP. This resulted in the acrylic PSA forming the continuous phase, and by increasing the concentration of PVP a dispersed phase was developed. The dispersed phase has a higher viscosity than the continuous phase and therefore cannot wet the adherent and hence result in lowering the tack values.