Direct synthesis of copper faujasite

Copper containing faujasite has been successfully prepared for the first time using a direct synthesis method. Faujasite type zeolite can be prepared in the presence of copper species by tuning the synthesis conditions. Ammonium hydroxide was used to form a copper complex that was later mixed with the reacting gel. Sodium is required to obtain copper faujasite. The complete elimination of sodium ions from the starting gel produces amorphous material. Crystallization took place at 358 K for 11 days. Crystallization temperature of 373 K produces ANA type zeolite as an impurity. Increasing by two times the amount of copper complex added to the reacting gel increases the crystallization time of Cu-FAU from 11 to 20 days (the crystallization rate decreases). The copper containing faujasite obtained was characterized by XRD, FESEM, EDX, EPR, FT-IR, TPR, and BET. According to the XRD pattern only FAU type zeolite was obtained. According to TPR experiments, the reduction temperature for Cu²⁺ ions present in Cu-FAU prepared by direct synthesis was 70 K more than for Cu-FAU prepared by ion-exchange. This difference can be due to the different location of the copper ions in the supercages or in the sodalite cages of the faujasite.     

Crystallization study of chemically vapour-deposited amorphous silicon films by in situ x-ray diffraction

The solid phase crystallization kinetics of chemically vapour-deposited amorphous silicon films were studied by in situ X-ray diffraction. We determined the crystalline volume directly from the Bragg peak intensities at various times during isothermal annealing in the temperature range 578 °C < T < 658 °C. From these experiments we deduced that the crystallization was due to nucleation predominantly at the substrate-film interface followed by crystal growth perpendicular to this interface. The crystal growth rate was thermally activated with an activation energy E_v of 3.1 eV. A strong 〈111〉 preferred orientation of the growing polycrystal was observed and the grain size remained constant at about 60 nm. Evidence of stresses at the amorphous-crystalline interface during the early stages of crystallization was observed. A comparison with previous conductivity measurements is also carried out.     

Water‐Stable,Magnetic Silica–Cobalt/Cobalt Oxide–Silica Multishell Submicrometer Spheres

A method to produce monodisperse magnetic composite spheres with diameters from less than 100 nm to more than 1 μm in water solution is reported. The spheres consist of a dielectric silica core and a cobalt/cobalt oxide shell which can be protected from further oxidation with an outer shell of silica or, alternatively, they can be covered with the polymer polyvinylpyrrolidone as a stabilizer. The formation of a uniform magnetic shell proceeds with the adsorption of metallic cobalt seeds, produced by the reduction of cobalt chloride with sodium borohydride, on a self‐assembled layer of polyelectrolytes on the silica core. In the second step, an outer silica shell can be formed by the hydrolysis and condensation of (3‐aminopropyl)trimethoxysilane and tetraethoxysilane. The double‐shell composite spheres show excellent sphericity, monodispersity, and a magnetic hysteresis loop at room temperature.     

Electrophysiological properties and cholinergic responses of rat ventral oral pontine reticular neurons in vitro

This study analyses the relationship between the use of rotating instruments, the production of a smear layer and the presence of alterations to enamel microstructures. The rotating instruments used were carbide (8-12 blade) and diamond tipped (30-15 m) cutters. Cavities were made in extracted teeth. Subsequently, half the sample was analysed using the rugosimeter before and after the application of ortophosphoric acid at 35% for 15 and the other half suing a Scansion Electronic microscope (SEM). The results obtained showed on the one hand that carbide cutters leave a smoother surfacer than diamond tipped cutters, and on the other that the smear layer is eliminated better by carbide cutters compared to diamond tipped cutters. Moreover, there are no major traumatic-type alterations at the level of the enamel affecting the microstructure after the use of carbide cutters.     

Social constructivism and capacity building for environmental governance

The concept of capacity building for environmental protection and management refers to the process by which the abilities of societies to identify and solve environmental problems are developed. This work assumes a social constructivist perspective to the process of capacity building for environmental governance and thus depicts it as critically dependent on broader processes of political and socioeconomic modernization. In an attempt to depict such a process, a heuristic device is put forward as a model of capacity analysis. A theoretical discourse and new institutionalist perspectives are used to test such a model on a theoretical plane. Some preliminary conclusions are drawn from this theoretical exercise.