Calculation of jet’s inlet temperature for plate temperature control in an impinging jet cooling problem

In this study, a conjugate gradient method based inverse algorithm is applied to estimate the inlet jet temperature in an impinging jet cooling problem. Given the maximum allowable plate temperature and the extent of the area on plate where temperature needs to be controlled, the jet temperature required to meet the two demands can be determined. The tests in two scenarios show that very accurate inlet jet temperatures were returned, resulting in a maximum temperature less than 1% difference with the specified temperature within the specified area. The technique presented here can be a great assist to engineers to design adequate thermal management systems for devices or processes requiring jet impingement cooling.     

The influence of finite element meshes on the results of a spatial polycrystalline aggregate model

The influence of the microstructural inhomogenities in materials on the life-time of safety significant components of nuclear power plants is still not fully characterized. One of the most important sources of inhomogenities in metals is their grain structure. Differences in crystallographic orientations of grains lead to different responses under the applied loads and increased stresses at the grain boundaries. Engineering tools which are used to assess a response of a structural component to the applied loads are typically based upon the mechanics of continuum and are not able to account for these effects. Dedicated polycrystalline aggregate models are therefore being developed to study the effects of the microstructure on the load carrying capabilities of materials. However, a limited number of finite element types can be used due to the geometrical complexity of such models. A procedure for testing the behaviour of different finite elements in simulations involving explicit models of randomly shaped and oriented grains described by crystalline elasticity and crystal plasticity is therefore proposed. Cumulative distributions of the stress/strain tensors in all integration points in the model are compared, enabling comparison of the “average” (macroscopic) as well as “extreme” (local) behaviour of different meshes. Such an approach provides an easy to use probabilistic measure of the quality of results obtained using different element types, formulations and mesh densities.     

Canonical piecewise-linear analysis: Generalized breakpoint hopping algorithm

As an extension to the breakpoint hopping algorithm developed in reference 1, the algorithm presented in this paper efficiently solves the d.c. problem for finding the d.c. operating point(s) and for tracing the driving-point and transfer characteristics of an extremely broad class of non-linear resistive circuits. In particular, bipolar and MOS transistor circuits are included. A user-friendly C program has been written to implement this algorithm where the input format for describing the circuit is compatible with the SPICE program.     

Covalent attachment of gold nanoparticles to DNA templates

Functionalized gold nanoparticles have been covalently bound to internal, modified sites on double-stranded DNA. Gold nanoparticles coated with mercaptosuccinic acid or thioctic acid were bound to amino-modified thymine bases on double-stranded DNA. Visible absorption spectra, gel electrophoresis, and atomic force microscopy were used to analyze the products. Thiol groups were added to one end of the gold/nanoparticle product, which was then attached to a gold surface. This method has the potential to allow controlled placement of particles with subnanometer precision and to allow attachment of the product to fixed contacts for nanodevice fabrication.     

Attenuation coefficient and propagation speed estimates of rat and pig intercostal tissue as a function of temperature

Attenuation coefficient and propagation speed of intercostal tissues were estimated as functions of temperature (22, 30, and 37 degrees C) from fresh chest walls from eight 10- to 11-week-old female Sprague-Dawley (SD) rats, eight 21- to 24-week-old female Long-Evans (LE) rats, and ten 6- to 10-week-old mixed sex Yorkshire (York) pigs. The primary purpose of the study was to estimate the temperature dependence of the intercostal tissue's attenuation coefficient so that accurate estimates of the in situ (at the pleural surface) acoustic pressure levels could be made for our ultrasound-induced lung hemorrhage studies. The attenuation coefficient of intercostal tissue for both species was independent of the temperature at the discrete frequencies of 3.1 MHz (-0.0076, 0.0065, and 0.016 dB/cm/degrees C for SD rats, LE rats, and York pigs, respectively) and 6.2 MHz (-0.015, 0.014, and 0.014 dB/cm/degrees C for SD rats, LE rats, and York pigs, respectively). However, the temperature-dependent regressions yielded a significant temperature dependency of the intercostal tissue attenuation coefficients in SD and LE rats (over the 3.1 to 9.6 MHz frequency range); there was no temperature dependency in York pigs (over the 3.1 to 8.6 MHz frequency range). There was no significant temperature dependency of the intercostal tissue propagation speed in SD rats; there was a temperature dependency in LE rats and York pigs (-0.59, -1.6, and -2.9 m/s/degrees C for SD rats, LE rats, and York pigs, respectively). Even though the attenuation coefficient's temperature dependency was significant from the linear regression functions, the differences were not very great (-0.040 to -0.13, 0.011 to 0.18, and 0.055 to 0.10 dB/cm/degrees C for SD rats, LE rats, and York pigs, respectively, over the data frequency range). These findings suggest that it is not necessary to determine the attenuation coefficient of intercostal tissue at body temperature (37 degrees C), but rather it is sufficient to determine the attenuation coefficient at room temperature (22 degrees C), a much easier experimental procedure.     

A field comparison of neck and shoulder postures in symptomatic and asymptomatic office workers

Poor neck and shoulder postures have been suggested to be a cause of neck and shoulder pain in computer workers. The present study aimed to evaluate and compare the head, neck and shoulder postures of office workers with and without symptoms in these regions, in their actual work environments. The two all female subject groups reported significantly different discomfort scores across five trials repeated in a single working day. The results of repeated video capture and two-dimensional motion analysis showed that there were trends for increased head tilt and neck flexion postures in the symptomatic subjects (n = 8), compared to the asymptomatic subjects (n = 8). Symptomatic subjects also tended to have more protracted acromions compared with asymptomatic subjects and showed greater movement excursions in the head segment and the acromion. All subjects demonstrated an approximately 10% increase in forward head posture from their relaxed sitting postures when working with the computer display, but there were no significant changes in posture as a result of time-at-work.     

Early Warning Signs of it Project Failure: The Dominant Dozen

The postmortem examination of failed IT projects reveals that long before the failure there were significant symptoms or “early warning signs.” This article describes the top 12 people-related and project-related IT project risks, based on “early warning sign” data collected from a panel of 19 experts and a survey of 55 IT project managers.     

3D sketching for aesthetic design using fully free-form deformation features

This paper addresses the designers’ activity and in particular the way designers express an object shape in 2D sketches through character lines and how these lines form a basis for sketching shapes in 3D. The tools currently available in commercial CAS/CAD systems to manipulate the digital models are still not sufficiently suited to support design. In this paper, the so-called fully free-form deformation features (δ-F⁴) are introduced as a modelling method to take into account the curve-oriented stylists’ way of working. Both the advantages of a free-form surface deformation method and a feature-based approach are merged to define these high-level modelling entities allowing for a direct manipulation of surfaces through a limited number of intuitive parameters. Such features incorporate several characteristics designed to handle the uncertainties and/or inconsistencies of the designer's input during a sketching activity. In addition, a δ-F⁴ classification is proposed to enable a fast access to the desired shape according to its semantics and characteristics.     

Towards evidence-based guidelines for wise use of computers by children

This paper argues for the systematic development and presentation of evidence-based guidelines for appropriate use of computers by children. The currently available guidelines are characterised and a proposed conceptual model presented. Five principles are presented as a foundation to the guidelines. The paper concludes with a framework for the guidelines, key evidence for and against guidelines, and gaps in the available evidence, with the aim of facilitating further discussion.

Relevance to industry

The current generation of children in affluent countries will typically have over 10 years of computer experience before they enter the workforce. Consequently, the primary prevention of computer-related health disorders and the development of good productivity skills for the next generation of workers needs to occur during childhood.     

Stability analysis of generalized cellular neural networks

A rather general class of neural networks, called generalized cellular neural networks (CNNs), is introduced. the new model covers most of the known neural network architectures, including cellular neural networks, Hopfield networks and multilayer perceptrons. Several sets of conditions ensuring the input-output stability and global asymptotic stability of generalized CNNs have been obtained. the conditions for the stability of individual cells are checked in the frequency domain, while the stability of the overall network is analysed in terms of the stability of individual cells and the connectivity characteristics. the results on the global asymptotic stability are useful for the design of a generalized CNN such that the orbit of each state converges to a globally asymptotically stable equilibrium point which depends only on the input and not on the initial state. Such a network defines an algebraic map from the space of external inputs to the space of steady state values of the outputs and hence can accomplish cognitive and computational tasks.