Nutritional recovery of mild and moderately malnourished children under two different treatment approaches (ambulatory versus day-care)

This retrospective analysis was conducted between May 1997 and May 2000 at the Centro de Atención Nutricional Infantil de Antímano, CANIA, in Caracas, Venezuela to assess the efficacy of two treatments (ambulatory versus day-care) of mild and moderate malnourished children. Inclusion criteria were: children under 10 years old with mild and moderate malnourishment, who attended a minimum of 3 control visits during a period of 12 months. One hundred fourteen malnourished children were included: fifty seven in ambulatory treatment and fifty seven in day-care treatment paired per nutritional diagnosis, gender and age (thirty nine mild and eighteen moderate malnourished children). The nutritional recovery criterion was weight for height above tenth percentile. No relation was found between treatment approaches and nutritional recovery at 3 and 6 months of treatment. In the group of mild malnourished children, the percentage of recovered patients at 3 months of treatment, that kept their recovered condition at 6 months was 83% (15/18) in the ambulatory treatment and 82% (18/22) in the day-care treatment Age of children, associated disease, acute morbidity, dietetic risk and mother's education and age were not associated with nutritional recovery at 6 months of treatment (p > 0.05). The day-care approach resulted as effective as ambulatory in mild malnourished children. In moderate malnourished new studies will need to be conducted with greater number of patients.     

Invariant‐set‐based fault diagnosis in Lure systems

In this paper, we present an invariant‐set‐based method for actuator and sensor fault detection and isolation in Lure systems. The Lure plant is controlled by an observer‐based feedback tracking controller, designed for the nominal (fault‐free) system. Suitable residual signals are constructed from measurable system outputs and estimates associated with the nominal observer. Faults are diagnosed by online contrasting the residual signal trajectories against sets of values that the residuals are shown to attain under healthy or faulty operation. These values are obtained via set‐invariance analysis of the system closed‐loop trajectories. Copyright © 2013 John Wiley & Sons, Ltd.     

Assessment of weld line performance of PP/Talc moldings produced in hot runner injection molds

Weld lines are weak regions in thermoplastic injection moldings caused by low molecular entanglement and unfavorable orientation. Their occurrence may lead to a significantly reduced mechanical performance of the products. Therefore, when weld lines are likely to occur in molded products, they must be taken into account during the mechanical and technological design processes. The weld lines become more critical when particulate fillers are compounded with the polymer. The performance of weld lines in talc‐filled polypropylene box moldings produced with a double‐gated hot runner mold is assessed in this work. The processing conditions were varied in order to cause morphology and tensile‐impact resistance changes. The weld performance at room temperature was assessed in terms of the energy absorbed in the impact tests. It was found that the performance depends on the injection temperature, the injection rate, and the orientation of the talc particles in the weld‐line plane. J. VINYL ADDIT. TECHNOL., 13:159–165, 2007. © 2007 Society of Plastics Engineers     

Foam processing of poly(ethylene-co-vinyl acetate) rubber using supercritical carbon dioxide

Soft rubber foams like poly(ethylene-co-vinyl acetate) (EVA) are industrially applied in a broad range of products, including sports gear, insulation materials and drug delivery systems. In contrast to glassy polymers, few studies in literature concern the foaming of soft rubbers using supercritical carbon dioxide. In this study, open microporous matrices of EVA have been formed with CO₂. Prior to the foam expansion, sorption and swelling isotherms of CO₂ in EVA have been measured and the obtained isotherms have been correlated using the Sanchez-Lacombe equation of state. Additionally, a pressure-independent diffusion coefficient of CO₂ in EVA has been obtained from these experiments. The microporous foams have been formed by a pressure quench of the CO₂-swollen polymer matrix. Sorption pressure as well as temperature and decompression times appear to determine the pore size and bulk density of the foam. These parameters allow for a control of the foam structure of EVA rubbers.     

Influence of air oxidation on the pressure exerted by coking coals during carbonization

The effects of air oxidation of three Spanish coals on the pressure exerted during carbonization have been studied. Coals were oxidized by air in an oven at 120 and 140 °C. The extent of oxidation was assessed by the Audibert-Arnu dilatometer test. Coal samples oxidized at different levels were subjected to the Koppers-lncar laboratory coking pressure test. The results obtained indicated that for coals classified as ‘dangerous’ the ‘danger’ increased and reached a maximum at a certain level of oxidation, after which it decreased sharply. This behaviour did not occur with coals classified as safe.     

Enhancing thermal and dynamic-mechanical properties of epoxy reinforced by amino-functionalized microcrystalline cellulose

In this study, microcrystalline cellulose (MCC) was chemically modified with 3-(aminopropyl)triethoxysilane and added to epoxy to improve chemical, thermal and dynamic-mechanical characteristics of the composites. The composites were manufactured aided by sonication with 1.0%, 2.5%, or 5.0% wt/wt of untreated MCC or amino-functionalized MCC (MCC-Si). The epoxy/MCC-Si composites showed a decrease in the ─OH band by Fourier-transform infrared spectroscopy, and X-ray diffraction analysis indicated better dispersion. The incorporation of MCC-Si in epoxy resin decreased the heat of reaction, increased activation energy values (E_a) and pre-exponential factor (A), and did not affect thermal degradation. All conversion degree (α) versus temperature curves for the composites showed a sigmoidal shape. MCC-Si composites showed better dynamic-mechanical properties than the MCC counterparts, and the functionalization effect was evidenced in storage modulus (E') and loss modulus (E"). At 2.5% wt/wt of MCC-Si content an increase of 119% in E' at the glassy region, 127% in E' at the rubbery region and 173% in E" was observed compared to the neat resin, whereas the T_g barely changed among samples. Good adhesion between the amino-functionalized MCC and the epoxy matrix was observed at the fracture surface, evidencing that surface modification of MCC improves their chemical interaction.     

Sintering-driven effects on the band gap of (Pb,La)(Ti,Ni)O3 photovoltaic ceramics

In this work, the influence of the sintering temperature on the physical properties of (Pb_0.8La_0.2)(Ti_0.9Ni_0.1)O₃ (PLT-Ni) ceramics is reported. The experimental data revealed that the energy band gap of PLT-Ni ceramics could be tailored from approximately 2.7 to 2.0 eV by changing the sintering temperature from 1100°C to 1250°C. It is demonstrated that the simple substitution of Ti⁴⁺ by Ni²⁺ cations is effective to decrease the intrinsic band gap while increasing the tetragonality factor and the spontaneous polarization. However, the additional red-shift observed in the absorption edge of the PLT-Ni with increasing the sintering temperature was associated with a continuous increase in the oxygen vacancies () amount. It is believed that the impact of the creation of these thermally induced is manifold. The presence of and Ni²⁺ ions generate the Ni²⁺- defect-pairs that promoted both a decrease in the intrinsic band gap and an additional increase of the tetragonality factor, consequently, increasing the spontaneous polarization. The creation of Ni²⁺- defects also changed the local symmetry of Ni²⁺ ions from octahedral to a square pyramid, thus lifting the degeneracy of the Ni²⁺ 3d orbitals. With the increase in the sintering temperature, lower-energy absorbing intraband states were also formed due to an excess of , being responsible for an add-on shoulder in the absorption edge, extending the light absorption curve to longer wavelengths and leading to an additional absorption in “all investigated” spectrum as well.     

Boundary scan test,test methodology,and fault modeling

The test technique called boundary scan test (BST) offers new opportunities in testing but confronts users with new problems too. The implementation of BST in a chip has become an IEEE standard and users on board level are the next group to begin thinking about using the new possibilities. This article addresses some of the questions about changes in board-level testing and fault diagnosis. The fault model itself is also affected by using BST. Trivial items are extended with more sophisticated details in order to complete the fault model. Finally, BST appears to be a test technique that offers a high degree of detectability on board level, but for diagnosis, some additional effort has to be made.     

Dynamic Parameter Identification Based on Lagrangian Formulation and Servomotor-type Actuators for Industrial Robots

International Journal of Control, Automation and Systems - This article presents the design of a parameter identification model for industrial manipulator robots. This model includes the dynamics...     

Measuring and improving the quality of development processes based on usability and accessibility

Universal Access in the Information Society - Measurement of both usability and accessibility is an important concern in software development today. However, while a great amount of attention has...