Sensitive and Reversible Detection of Methanol and Water Vapor by In Situ Electrochemically Grown CuBTC MOFs on Interdigitated Electrodes

The in situ electrochemical growth of Cu benzene‐1,3,5‐tricarboxylate (CuBTC) metal–organic frameworks, as an affinity layer, directly on custom‐fabricated Cu interdigitated electrodes (IDEs) is described, acting as a transducer. Crystalline 5–7 µm thick CuBTC layers are grown on IDEs consisting of 100 electrodes with a width and a gap of both 50 µm and a height of 6–8 µm. These capacitive sensors are exposed to methanol and water vapor at 30 °C. The affinities show to be completely reversible with higher affinity toward water compared to methanol. For exposure to 1000 ppm methanol, a fast response is observed with a capacitance change of 5.57 pF at equilibrium. The capacitance increases in time followed diffusion‐controlled kinetics (k = 2.9 mmol s^?0.5 g^?1_CuBTC). The observed capacitance change with methanol concentration follows a Langmuir adsorption isotherm, with a value for the equilibrium affinity K _e = 174.8 bar^?1. A volume fraction f _MeOH = 0.038 is occupied upon exposure to 1000 ppm of methanol. The thin CuBTC affinity layer on the Cu‐IDEs shows fast, reversible, and sensitive responses to methanol and water vapor, enabling quantitative detection in the range of 100–8000 ppm.     

Topology optimization of continuum structures subjected to uncertainties in material properties

This work addresses the use of the topology optimization approach to the design of robust continuum structures under the hypothesis of uncertainties with known second‐order statistics. To this end, the second‐order perturbation approach is used to model the response of the structure, and the midpoint discretization technique is used to discretize the random field. The objective function is a weighted sum of the expected compliance and its standard deviation. The optimization problem is solved using a traditional optimality criteria method. It is shown that the correlation length plays an important role in the obtained topology and statistical moments when only the minimization of the standard deviation is considered, resulting in more and thinner reinforcements as the correlation length decreases. It is also shown that the minimization of the expected value is close to the minimization of the deterministic compliance for small variations of Young's modulus. Copyright © 2016 John Wiley & Sons, Ltd.     

A syntactic approach based on distortion-tolerant Adjacency Grammars and a spatial-directed parser to interpret sketched diagrams

This paper presents a syntactic approach based on Adjacency Grammars (AG) for sketch diagram modeling and understanding. Diagrams are a combination of graphical symbols arranged according to a set of spatial rules defined by a visual language. AG describe visual shapes by productions defined in terms of terminal and non-terminal symbols (graphical primitives and subshapes), and a set functions describing the spatial arrangements between symbols. Our approach to sketch diagram understanding provides three main contributions. First, since AG are linear grammars, there is a need to define shapes and relations inherently bidimensional using a sequential formalism. Second, our parsing approach uses an indexing structure based on a spatial tessellation. This serves to reduce the search space when finding candidates to produce a valid reduction. This allows order-free parsing of 2D visual sentences while keeping combinatorial explosion in check. Third, working with sketches requires a distortion model to cope with the natural variations of hand drawn strokes. To this end we extended the basic grammar with a distortion measure modeled on the allowable variation on spatial constraints associated with grammar productions. Finally, the paper reports on an experimental framework an interactive system for sketch analysis. User tests performed on two real scenarios show that our approach is usable in interactive settings.     

Implementing enterprise resource planning systems: organizational performance and the duration of the implementation

This paper examines the impact of the duration of ERP implementation on firm performance both during and after implementation. Organizations choose either an accelerated implementation approach or a traditional (longer) implementation approach. The former approach gives the organization the advantage of speed, but the disadvantage of fitting its processes to that of a packaged (thus, undifferentiated from competitors) ERP. The latter approach allows the organization to redesign strategy and processes, and thus, search for ways to be unique from its competition. The study uses a regression model to capture the changes in various performance measures during and after implementation between firms that implemented the ERP, using the performance measure of a matched group of firms that did not implement an ERP as a benchmark/control sample, on the basis of the duration of the implementation. Financial data from Compustat, and data on start date and end date of ERP implementation between 1990 and 2005 for firms in the Oil and Gas industry was collected from an ERP vendor. Results show that measures such as return on sales improved after implementation. However, measures such as inventory turnover, which reflect operational benefits, improve during implementation. We find that accelerated implementation confers both operational and strategic benefits. This study highlights the strategic consequences of the different choices of implementation.     

Segmentation of the carotid intima-media region in B-mode ultrasound images

This paper proposes a new approach for the segmentation of both near-end and far-end intima-media regions of the common carotid artery in ultrasound images. The method requires minimal user interaction and is able to segment the near-end wall in arteries with large, hypoechogenic and irregular plaques, issues usually not considered previously due to the increased segmentation difficulty.     

A memetic algorithm for the multi-compartment vehicle routing problem with stochastic demands

The multi-compartment vehicle routing problem (MC-VRP) consists of designing transportation routes to satisfy the demands of a set of customers for several products that, because of incompatibility constraints, must be loaded in independent vehicle compartments. Despite its wide practical applicability the MC-VRP has not received much attention in the literature, and the few existing methods assume perfect knowledge of the customer demands, regardless of their stochastic nature. This paper extends the MC-VRP by introducing uncertainty on what it is known as the MC-VRP with stochastic demands (MC-VRPSD). The MC-VRPSD is modeled as a stochastic program with recourse and solved by means of a memetic algorithm. The proposed memetic algorithm couples genetic operators and local search procedures proven to be effective on deterministic routing problems with a novel individual evaluation and reparation strategy that accounts for the stochastic nature of the problem. The algorithm was tested on instances of up to 484 customers, and its results were compared to those obtained by a savings-based heuristic and a memetic algorithm (MA/SCS) for the MC-VRP that uses a spare capacity strategy to handle demand fluctuations. In addition to effectively solve the MC-VRPSD, the proposed MA/SCS also improved 14 best known solutions in a 40-problem testbed for the MC-VRP.     

A genetic solution based on lexicographical goal programming for a multiobjective job shop with uncertainty

In this work we consider a multiobjective job shop problem with uncertain durations and crisp due dates. Ill-known durations are modelled as fuzzy numbers. We take a fuzzy goal programming approach to propose a generic multiobjective model based on lexicographical minimisation of expected values. To solve the resulting problem, we propose a genetic algorithm searching in the space of possibly active schedules. Experimental results are presented for several problem instances, solved by the GA according to the proposed model, considering three objectives: makespan, tardiness and idleness. The results illustrate the potential of the proposed multiobjective model and genetic algorithm.     

A framework for the definition of metamodels for Computer-Aided Software Engineering tools

Computer-Aided Software Engineering (CASE) tools support modeling-related activities in development projects. Given the variety of tools and functionalities, it is quite common to work with several tools in the same project. However, data cannot usually be exchanged between these tools without loss of information. Recent approaches address this model interchange problem using metamodels to characterize the involved information and transformations to export/import it. Nevertheless, most of these solutions focus on the abstract syntax of models. They fail to consider aspects such as the presentation of models or tool-specific information, which are either disregarded or represented in ad-hoc ways that make difficult their processing. In order to overcome these limitations, this paper introduces a framework to define metamodels of CASE tools and a process to carry out the model interchange using them. The proposed metamodels have a modular organization with several internal metamodels. Each of them is aimed at describing some specific information about content, structure and presentation for both models and tools. The paper illustrates this approach with a case study used for comparison with existing works for this problem.     

A methodology for the generation of planar models for multibody chain drives

To overcome the difficulty on building manually complex models of chain drives, this work proposes a comprehensive methodology to build multibody models of any general chain drive automatically from a minimal set of data. The proposed procedure also evaluates the initial positions and velocities of all components of the drive that are consistent with the kinematic joints or with the contact pairs used in the model. In this methodology, all links and sprockets are represented by rigid bodies connected to each other either by ideal or by clearance revolute joints. The clearance revolute joint contact is further extended to handle the contact between the chain rollers and the sprocket teeth exact profiles. A suitable cylindrical continuous contact law is applied to describe the interaction on all contact pairs. One of the complexities of the computational study of roller chain drives is the large number of bodies in the system and the dynamics of the successive engagement and disengagement of the rollers with the sprockets. Each time a roller engages or disengages with a sprocket tooth, the number of rigid bodies in contact changes. The search for the contact pairs is recognized as one of the most time consuming task in contact analysis. This work proposes a procedure to specify the contact pairs and their update during the dynamic analysis optimizing the computational efficiency of the contact search. The methodologies adopted result in a general computer program that is applied and demonstrated in a generic chain drive that can be used in industrial machines, vehicle engines or any other type of mechanical system.