Dry Machining Tool Design via Chlorine Ion Implantation

DRY MACHINING is a keyword for manufacturingand production science in the twenty-first century,which requires significant reduction of environmentalburden and COi emission11.In the modern high-speedwet and semi-dry machining processes,huge amountsof lubricants and cleansing agents are wasted in dailyproduction2).Among various proposals aiming at thedry machining3"5>,in-situ formation of tribo-filrns mustbe an important concept to make dry machining tools.Authors have pointed out the impor…     

Experiment study on fracture fixation with low rigidity titanium alloy

In order to investigate bone tissue reaction to the low rigidity titanium alloy of TNTZ in bone plate fixation, animal experiment with rabbit was performed with X-ray follow-up and histological observation. Experimental fractures were made in rabbit tibiae, and fixed by different bone plates of SUS316L, Ti–6Al–4V and TNTZ. Although there was no significant difference in fracture healing, bone atrophy was observed in cortical bone especially under the bone plate, which was different in time course among three materials. The bone atrophy under the bone plate was confirmed as porous or poor bone tissue in histological observation. In addition, the diameter of the tibia bone was increased in TNTZ as the result of bone remodeling with a new cortical bone. It is confirmed that the elastic modulus of the bone plate will naturally influence bone tissue reaction to the bone plate fixation according to the Wolff’s law of functional restoration.     

Crystal structure of the bacterial ribosomal decoding site complexed with a synthetic doubly functionalized paromomycin derivative: a new specific binding mode to an a-minor motif enhances in vitro antibacterial activity

The crystal structure of the complex between oligonucleotide containing the bacterial ribosomal decoding site (A site) and the synthetic paromomycin analogue 1, which contains the gamma-amino-alpha-hydroxybutyryl (L-haba) group at position N1 of ring II (2-DOS ring), and an ether chain with an O-phenethylaminoethyl group at position C2' of ring III, is reported. Interestingly, next to the paromomycin analogue 1 specifically bound to the A site, a second molecule of 1 with a different conformation is observed at the crystal packing interface which mimics the A-minor interaction between two bulged-out adenines from the A site and the codon-anticodon stem of the mRNA-tRNA complex. Improved antibacterial activity supports the conclusion that analogue 1 might affect protein synthesis on the ribosome in two different ways: 1) specific binding to the A site forces maintenance of the "on" state with two bulged out adenines, and 2) a new binding mode of 1 to an A-minor motif which stabilizes complex formation between the ribosome and the mRNA-tRNA complex regardless of whether the codon-anticodon stem is of the cognate or near-cognate type.     

Examples of successful architectural integration of PV: Japan

By the end of 2002 more than 1300 MWp of photovoltaic power was installed in industrialized countries worldwide. Of this, approximately 640 MWp, or 48%, is installed in Japan, mainly on buildings. This makes Japan the most prominent country in the field of building-integrated photovoltaics (BIPV). The interest in integration of PV among Japanese architects has increased accordingly, which has resulted in many sophisticated and innovative designs. This short communication introduces four examples of successful architectural integration from different fields. The Japanese government aims at an installed PV capacity of 4820 MWp in 2010. In parallel, the Japanese PV industry needs to develop into a strong sector which is able to operate without direct market support. The role of architects in this process should not only be to increase the volume of building integrated PV, but also to make comprehensive, integral designs, which include sunlight shading, thermal insulation, energy saving, passive use of solar energy, and obviously also photovoltaics. Furthermore, architects could make an important contribution to establishing a new, sustainable urban environment in which BIPV is used on a large scale as a distributed source of energy. This fits well within the new international effort in the framework of the International Energy Agency (IEA), Photovoltaic Power Systems (PVPS), Task 10. Copyright © 2004 John Wiley & Sons, Ltd.     

Effect of tube bundles on nucleate boiling and critical heat flux

In order to elucidate boiling heat transfer characteristics for each tube and the critical heat flux (CHF) for tube bundles, an experimental investigation of pool and flow boiling of Freon-113 at 0.1 MPa was performed using two typical tube arrangements. A total of fifty heating tubes of 14 mm diameter, equipped with thermocouples and cartridge heaters, were arrayed at pitches of 18.2 and 21.0 mm to simulate both square in-line and equilateral staggered bundles. For the flow boiling tests the same bundles as were used in pool boiling were installed in a vertical rectangular channel, to which the fluid was supplied with an approach velocity varying from 0.022 to 0.22 m/s. It was found in this study that the boiling heat transfer coefficient of each tube in a bundle was higher than that for an isolated single tube in pool boiling. This enhancement increases for tubes at higher locations, but decreases as heat flux is increased. At heat fluxes exceeding certain values, the heat transfer coefficient becomes the same as that for an isolated tube. As the heat flux approaches the CHF, flow pulsations occurred in the pool boiling experiments although the heat transfer coefficient was invariant even under this situation. The approach velocity has an appreciable effect on heat transfer up to a certain level of heat flux. In this range of heat flux, the heat transfer coefficient exceeds the values observed for pool boiling. An additive method with two contributions, i.e., single phase convection and boiling, was used to predict the heat transfer coefficient for bundles. The predicted results showed reasonable agreement with the measured results. The critical heat flux in tube bundles tended to increase as more bubbles were rising through the tube clearance. © 1998 Scripta Technica, Heat Trans Jpn Res, 27(4): 312–325, 1998     

Microstructure and stress corrosion cracking of the fusion boundary region in an alloy 182-A533B low alloy steel dissimilar weld joint

Stress corrosion cracking (SCC) in the fusion boundary (FB) region of an Alloy 182-A533B low alloy steel (LAS) dissimilar weld joint in high temperature water doped with sulfate was studied following a microstructure characterization of the FB region. The microstructure characterization suggested the type-II and type-I boundaries in the dilution zone (DZ) adjacent to the FB had lower resistance to SCC growth than the FB. Crack propagating perpendicular to the FB in the DZ was observed to be blunted by pitting at the FB, followed by the reactivation from the pitting by localized oxidation along the grain boundary in LAS.     

Streptomyces aminopeptidase P: biochemical characterization and insight into the roles of its N-terminal domain

We purified and characterized the aminopeptidase P from Streptomyces costaricanus TH-4 (thAPP). This enzyme has a tetramer structure, a metal-ion preference toward Zn, broad substrate specificity and a narrow pH dependency for activity. The primary structure of thAPP, respectively, exhibits 91% and 65% identity with those of two other APPs-APP I and APP II-from Streptomyces lividans (slAPP I and slAPP II). We next overexpressed the genes encoding thAPP and slAPP II in Escherichia coli and characterized them. Two differences were apparent in their properties: slAPP II formed a dimer, whereas thAPP formed a tetramer; also, the alkaline side pKa for the catalytic action of slAPP II is higher than that of thAPP. Investigation using chimeras of both enzymes revealed that the N-terminal domain is associated with the determination of pKa values for catalytic action and quaternary structure.