Surface modification of commercial carbon black by silane coupling agents for improving dispersibility in rubber compounds

The dispersion of a filler in a rubber matrix is a crucial parameter affecting the mechanical and dynamical properties of a rubber compound. It is the current issue of the rubber compounding industry because, most fillers are categorized as a mineral, while the rubber is an organic material. The surface modification of the filler has been accepted as an effective technique for the improvement of the abovementioned parameter. First, the surface premodification of commercial carbon black with a grade of N660 (CB) was implemented by four different oxidation methods. After that, among of used methods, the oxidation method using citric acid was selected to produce modified carbon black (CB-Oxi) for further treatment. Subsequently, the coupling agent, Bis[3-(triethoxysilyl)propyl] tetrasulfide (TESPT) was functionalized on the surface of CB-Oxi to produce modified-CB-Oxi. Also, for comparison purposes, the TESPT functionalization was accomplished on untreated CB to form modified-CB. The FTIR spectra of CB-Oxi showed using the premodification method introduced the hydroxyl and carboxyl groups on the surface of CB. The correspondent spectra for modified-CB-Oxi confirmed the existence of silane groups on the surface of the carbon black. However, the mentioned silane groups were not observed on the surface of modified-CB. The findings were strengthened by several characteristic techniques including, FESEM, XRD, EDS, CHNS elemental analysis, and RAMAN spectra. The FESEM graphs and elemental mapping showed homogeneous dispersion and uniform distribution of sulfur and silicon elements on the modified-CB-Oxi surface. According to RAMAN spectra, the disturbance in the structure of carbon black graphite was reduced after surface modification. modified-CB-Oxi is proposed as a potential substitute filler for current commercial carbon black in rubber compounding.     

Nanosecond streak photography of discharge initiation on ice surfaces

This paper presents an exploratory experimental study of discharge initiation on surface of ice. The phenomena underlying these processes are, as yet, poorly understood. To elucidate the initiation process in particular, ultra high-speed streak photography was used to observe and analyze the first visible discharges and a number of parameters were investigated. It could be shown that ambient temperature, conductivity of ice surface and the presence of imperfections on the ice surface influence not only the critical voltage for discharge initiation, but also the velocity of discharge development. Some parameters could be identified, which should be investigated further. The present paper is the first stage of a long-term research effort in this new field. This study should enable further experimental investigations and mathematical simulations to gain better understanding of ice surface discharges, specifically in the context of electrical insulation integrity of support insulators in power systems operating under severe atmospheric conditions.     

Specific investigations to quantify heavy damage causes on loading resistor modules

In this paper, premature damage to some static inverter loading resistor modules is analyzed. Furthermore, investigations were carried out to determine the origins and causes of this serious damage occurring on the resistor modules in service. Investigations were preformed on the insulating liquid samples as well as new resistor modules. From the results obtained, it seems that the origin of the damage is from a long-standing, free-burning arc between two resistor windings, following mechanical breakdown.     

Characterization and amino acid sequence of the OXY-2 group beta-lactamase of pI 5.7 isolated from aztreonam-resistant Klebsiella oxytoca strain HB60

EPA's Risk Assessment Guidance for Superfund (RAGS) and later documents provide guidance for estimating exposures received from suburban and agricultural activity patterns and lifestyles. However, these methods are not suitable for typical tribal communities whose members pursue, at least in part, traditional lifestyles. These lifestyles are derived from a long association with all of the resources in a particular region. We interviewed 35 members of a Columbia River Basin tribe to develop a lifestyle-based subsistence exposure scenario that represents a midrange exposure that a traditional tribal member would receive. This scenario provides a way to partially satisfy Executive Order 12,898 on environmental justice, which requires a specific evaluation of impacts from federal actions to peoples with subsistence diets. Because a subsistence diet is only a portion of what is important to a traditional lifestyle, we also used information obtained from the interviews to identify parameters for evaluating impacts to environmental and sociocultural quality of life.     

Stoffaustausch zwischen flüssigem Eisen und Schlacke beim Sprühraffinationsverfahren

Erläuterung des Sprühraffinationsverfahrens, bei dem eine Schmelze mit inertem Gas verdüst wird und die entstehenden Metalltropfen durch eine Raffinationsschlacke fallen. Erörterung der Gesetzmäßigkeiten für die Stoffaustauschvorgänge zwischen Metalltropfen und Schlacke. Bestimmung der mittleren Tropfengröße beim Versprühen von kohlenstoffgesättigtem Roheisen. Untersuchung der Wirkung der Sprühraffination am Beispiel der Entschwefelung des Roheisens mit Schlacken des Systems CaO–CaF₂–Al₂O₃ bei 1600 °C. Ermittlung des Stoffübergangskoeffizienten des Schwefels für den umgekehrt transitorischen Phasenkontakt und Vergleich mit Werten bei anderen Techniken des Phasenkontaktes Metall-Schlacke.     

The effect of natural flow of aquifers and associated dispersion on the onset of buoyancy‐driven convection in a saturated porous medium

Carbon dioxide injection into deep saline aquifers is an important option for managing CO₂ emissions. Injected CO₂ dissolves into formation brines from above, increasing brine density and creating an unstable hydrodynamic state favorable for natural convection. Long‐term buoyancy‐driven flow of high‐density CO₂‐saturated brine leads to faster trapping through improved dissolution and can reduce the risk of CO₂ leakage from storage sites. We investigate the role of natural flow of aquifers and associated dispersion on the onset of convection. A linear stability analysis of a transient concentration field in a laterally infinite, horizontal, and saturated porous layer with steady horizontal flow is presented. The layer is subjected to a sudden rise in CO₂ concentration from the top and is closed from the bottom. Solution of the stability equations is obtained using a Galerkin technique and the resulting equations are integrated numerically. We found simple scaling relationships that follow t_Dc～60(1 + Pe_T)Ra^‐2 for the onset time of convection and a～0.05Ra/(1 + Pe_T) for the wavenumber of the initial instabilities. Results reveal that transverse dispersion increases the time to onset of convection for the entire range of Ra. Furthermore, transverse dispersion decreases the critical wavenumber of the instabilities. These results facilitate screening candidate sites for geological CO₂ storage. © 2008 American Institute of Chemical Engineers AIChE J, 2009     

Effects of cold plasma on the color parameters of Hyssop (Hyssopus officinalis L.) using color imaging instrumentation and spectrophotometer

This research was conducted to evaluate the effects of cold atmospheric plasma treatment on the color of Hyssop (Hyssopus officinalis L.) and also to compare the usage of the spectrophotometer vs the color imaging instrumentation for the evaluation of the treatment on the color parameters. The experiments were investigated at different treatment times of 1, 5, and 10 minutes and the voltage values of 17, 20, and 23 kV. Possible changes of color were evaluated by using CIE L*a*b* values obtained with HunterLab colorimeter and CIE L*a*b* values obtained with a digital still camera (DSC) using digital image processing (MATLAB software). The values of L*, a*, and b* of the samples were obtained using both the methods. The results revealed that the L*, a*, and b* values of the treated Hyssop samples changed with increasing the treatment time and the voltage applied. Evaluating the interaction effects revealed that there was a significant difference in the (−a^*/b^* ) ratio. In addition, the results showed that the effects of all variables on the color parameters were significantly different in the case of the DSC using digital image processing. However, these effects were not significantly different using HunterLab colorimeter except for time variable and interaction effects of a* and (−a^*/b^* ) ratio. The lightest green color and the maximum chlorophyll content loss were observed for 23 kV applied over 10 minutes. Based on the results, the digital image processing can be used as a practical tool to study the variations at the color of dried Hyssop leaves after cold plasma treatment.     

State-of-the-art technology: Recent investigations on laser-mediated synthesis of nanocomposites for environmental remediation

In both developing and industrialized/developed countries, various hazardous/toxic environmental pollutants are entering water bodies from organic and inorganic compounds (heavy metals and specifically dyes). The global population is growing whereas the accessibility of clean, potable and safe drinking water is decreasing, leading to world deterioration in human health and limitation of agricultural and/or economic development. Treatment of water/wastewater (mainly industrial water) via catalytic reduction/degradation of environmental pollutants is extremely critical and is a major concern/issue for public health. Light and/or laser ablation induced photocatalytic processes have attracted much attention during recent years for water treatment due to their good (photo)catalytic efficiencies in the reduction/degradation of organic/inorganic pollutants. Pulsed laser ablation (PLA) is a rather novel catalyst fabrication approach for the generation of nanostructures with special morphologies (nanoparticles (NPs), nanocrystals, nanocomposites, nanowires, etc.) and different compositions (metals, alloys, oxides, core-shell, etc.). Laser ablation in liquid (LAL) is generally considered a quickly growing approach for the synthesis and modification of nanomaterials for practical applications in diverse fields. LAL-synthesized nanomaterials have been identified as attractive nanocatalysts or valuable photocatalysts in (photo)catalytic reduction/degradation reactions. In this review, the laser ablation/irradiation strategies based on LAL are systematically described and the applications of LAL synthesized metal/metal oxide nanocatalysts with highly controlled nanostructures in the degradation/reduction of organic/inorganic water pollutants are highlighted along with their degradation/reduction mechanisms.     

Effects of yoghurt butter oils on rat plasma lipids,haematology and liver histology parameters in a 150‐day study

Although yoghurt butter oil as a fermented dairy product is widely consumed in several countries, its metabolic effects have not been fully elucidated. In this study, male Wistar rats were treated with standard diet, standard diet enriched with 10% or 20% (W/W) of either cow yoghurt butter oil (CYBO), sheep yoghurt butter oil (SYBO) or cottonseed oil (COT) for 20 weeks. Treatment of rats with CYBO or SYBO (at both concentrations) did not significantly influence haematological parameters, plasma lipids and liver histological structure. However, in contrast to popular belief, COT treatment at the higher dose induced leukocytosis, dyslipidaemia and liver steatosis.